Recordings not highlighted in red
Recordings not highlighted in red
Howdy,
Idle question, but I've noticed of late that timers are not showing in the EPG as 'red filled' cells.
These are all created via IceTV. Haven't noticed the issue with timers set directly via the EPG.
The pop-up shows the timer listed, and indeed the timer fires correctly.
Any ideas? Is it somehow I have the timers set for a different LCN than what's in the Ice EPG?
Maybe a rescan of the channels is in order....
Idle question, but I've noticed of late that timers are not showing in the EPG as 'red filled' cells.
These are all created via IceTV. Haven't noticed the issue with timers set directly via the EPG.
The pop-up shows the timer listed, and indeed the timer fires correctly.
Any ideas? Is it somehow I have the timers set for a different LCN than what's in the Ice EPG?
Maybe a rescan of the channels is in order....
DP-P1 and other stuff...and now a V2
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Lately? I've had this problem with IceTV occasionally for as long as I can remember, and I've grumbled about it often enough on the IceTV forum..
However, there's been a recent change in the IceTV EPG Web pages (the recording setup panel is now quite different), so perhaps they've done something to exacerbate the problem.
It's probably best to grumble about it there, at least IceTV staff read the IceTV forum regularly and comment there, though my grumblings seem to have had little effect.
However, there's been a recent change in the IceTV EPG Web pages (the recording setup panel is now quite different), so perhaps they've done something to exacerbate the problem.
It's probably best to grumble about it there, at least IceTV staff read the IceTV forum regularly and comment there, though my grumblings seem to have had little effect.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
OK, I'll add to your grumblings on the IceTV forum.
I did notice it happen a while back but then stopped. IIRC I did a service rescan at the time and then the problem went away, which is why I wondered if there was some way my EPG was showing a different LCN than the one that the 'red cell' would be on. Of course, I have no idea what I'm talking about, and if you can't figure out what's causing it then I have no chance.
Cheers.
I did notice it happen a while back but then stopped. IIRC I did a service rescan at the time and then the problem went away, which is why I wondered if there was some way my EPG was showing a different LCN than the one that the 'red cell' would be on. Of course, I have no idea what I'm talking about, and if you can't figure out what's causing it then I have no chance.
Cheers.
DP-P1 and other stuff...and now a V2
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
I don't think that that should affect IceTV, either. But I could be wrong. The joys of locked-up-tight proprietary protocols.grampus wrote:And is it possible that you have excluded some of the channels due to favourites?
This wouldn't stop the timers being set up.
I have had problems with IceTV when I've chosen the wrong LCN, but that affected every IceTV timer on the service, not just occasional ones. But the completed setting of timers on the Beyonwiz not showing up as scheduled on the IceTV Web page is a more random and infrequent affair, and is "equal opportunity" across all services. Similarly for the error triangle showing up sometimes when the timer was set perfectly on the Beyonwiz.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
There's now a discussion of the problem with involvement of IceTV people on the IceTV forum.
I've had my usual whinge about how long the problem appears to have been neglected.
I've had my usual whinge about how long the problem appears to have been neglected.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Peter, that fact that you are in Canberra probably has a lot to do with that. You know how much the rest of us Australians ignore most of what comes out of Canberra.
Cheers,
Brian
1) 2 x T4, Samsung UA46C7000/Yamaha RX-V6A
2) Spare DP-P2s/ Samsung UA46C6900/Sony STR-DE497/RX-V540
Harmony 650 + all the spare remotes.....
Brian
1) 2 x T4, Samsung UA46C7000/Yamaha RX-V6A
2) Spare DP-P2s/ Samsung UA46C6900/Sony STR-DE497/RX-V540
Harmony 650 + all the spare remotes.....
It would if the OP is looking at the guide on the Wiz and has excluded the LCN that the timer is set for.prl wrote:I don't think that that should affect IceTV, either. But I could be wrong. The joys of locked-up-tight proprietary protocols.grampus wrote:And is it possible that you have excluded some of the channels due to favourites?
This wouldn't stop the timers being set up.
I posted the question earlier because when they said IceTV Guide, I wondered if they were looking at it on the Wiz not the website.
Cheers
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Yes. I re-read mishmash's posts here and on the IceTV Forum, and I agree that he's describing a problem with the IceTV guide on the Beyonwiz not showing times. This could be a Favorites problem, and if the problem is just not the timers being displayed in the Beyonwiz's guide, it's not the continuing problem I've been having with incorrect displays on the IceTV Web page.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV