No EPG info on any Network 10 channel in Brisbane

Discussions on Digital TV, Signal Areas, Scheduling and Programs.

Moderators: Gully, peteru

Post Reply
maverick#1
Apprentice
Posts: 88
Joined: Sun Jul 26, 2009 00:59

No EPG info on any Network 10 channel in Brisbane

Post by maverick#1 » Sun May 17, 2020 15:16

I normally look over the EPG each weekend to see if there's anything worth watching, but this weekend I noticed that there is nothing in the EPG for any of the Network 10 channels. Just in case it was an issue with my PVR, I checked all of my other PVRs and TVs and it's the same with all of them, which leads me to think that the EPG info isn't being transmitted (or updated) by Network 10.

Does anybody else in the Brisbane area have the same problem?
Last edited by maverick#1 on Sun May 17, 2020 20:26, edited 1 time in total.
Beyonwiz U4 (FW 19.3, Build 20211010)
Beyonwiz V2 (FW 19.3, Build 20211010)
Beyonwiz T3 (FW 19.3, Build 20191106) [No longer used - power supply cap problem]
Beyonwiz DP-P2 (FW DPP2-01.07.350)
Beyonwiz DP-Lite i (FW DPLite-01.07.350)

singlefished
Master
Posts: 115
Joined: Sat Feb 23, 2008 00:54

Re: No EPG info on any Network 10 channel in Brisbane

Post by singlefished » Sun May 17, 2020 18:06

Same problem for me here in Brisbane.... 10 hasn't been good for a few weeks now, my afternoon recording of Star Trek: Enterprise no longer has bookmarks for start and end of program.
4 DP's in da house.... New T2 arrived Dec'17!

maverick#1
Apprentice
Posts: 88
Joined: Sun Jul 26, 2009 00:59

Re: No EPG info on any Network 10 channel in Brisbane

Post by maverick#1 » Sun May 17, 2020 20:30

Thanks singlefished, it's reassuring to know that it's not just happening to me!
Beyonwiz U4 (FW 19.3, Build 20211010)
Beyonwiz V2 (FW 19.3, Build 20211010)
Beyonwiz T3 (FW 19.3, Build 20191106) [No longer used - power supply cap problem]
Beyonwiz DP-P2 (FW DPP2-01.07.350)
Beyonwiz DP-Lite i (FW DPLite-01.07.350)

User avatar
netmask
Wizard
Posts: 3658
Joined: Sun Aug 05, 2007 15:20
Location: Inner West, Sydney, Australia

Re: No EPG info on any Network 10 channel in Brisbane

Post by netmask » Sun May 17, 2020 20:50

It's been the same in Sydney - TEN is often blank, select the station and then now and next goes into the EPG timeline, eventually during the evening it fills. Often the secondary channels are blank. It's been happening intermittently since the change back to EST. I was going to post weeks ago but as I never watch TEN it slipped my mind....
BeyonWiz T3 and V2
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast

User avatar
Brainz
Apprentice
Posts: 62
Joined: Wed May 14, 2014 21:27
Location: Brisbane

Re: No EPG info on any Network 10 channel in Brisbane

Post by Brainz » Sun May 17, 2020 23:15

I'm 99% sure it was there this morning, but it has been missing since lunch time for me.
Not a big issue because I have IceTV but I like to crosscheck with the FTA guide sometimes for late changes!
For what is is worth, Freeview has full listings.
V2 1TB (19.3.20211010) w/ Hauppage Dual Tuner
T2 500GB (17.5.20190207) w/ Bluey USB Tuner
DP-P1 500Gb (Retired)

singlefished
Master
Posts: 115
Joined: Sat Feb 23, 2008 00:54

Re: No EPG info on any Network 10 channel in Brisbane

Post by singlefished » Sun May 17, 2020 23:42

On channel 10 my infobar tells me it's "LIVE: 10 News First" followed by "The Project" at 18:30.... I'm guessing that's from Friday evening as it appeared to be stuffed yesterday too from what I remember
4 DP's in da house.... New T2 arrived Dec'17!

maverick#1
Apprentice
Posts: 88
Joined: Sun Jul 26, 2009 00:59

Re: No EPG info on any Network 10 channel in Brisbane

Post by maverick#1 » Tue May 19, 2020 15:11

The EPG information for all Network 10 stations finally came back on sometime yesterday in my area. Hopefully that's also happened for the other areas where the EPG info was missing. There are still a number of times listed as 'To be announced' but that's pretty normal for Network 10 these days!
Beyonwiz U4 (FW 19.3, Build 20211010)
Beyonwiz V2 (FW 19.3, Build 20211010)
Beyonwiz T3 (FW 19.3, Build 20191106) [No longer used - power supply cap problem]
Beyonwiz DP-P2 (FW DPP2-01.07.350)
Beyonwiz DP-Lite i (FW DPLite-01.07.350)

Post Reply

Return to “Digital TV”