Anyone else having ABC ICE issues?
Anyone else having ABC ICE issues?
Hi there,
Anyone else finding huge gaps in the ICETV data for ABC TV? Did a quick scan, but couldn't find any current reports, I know it's been an issue on and off, but hadn't seen it myself until tonight.
Simon....
Anyone else finding huge gaps in the ICETV data for ABC TV? Did a quick scan, but couldn't find any current reports, I know it's been an issue on and off, but hadn't seen it myself until tonight.
Simon....
- tonymy01
- Uber Wizard
- Posts: 6373
- Joined: Fri Jun 01, 2007 15:25
- Location: Sydney, Australia DP-S1-1TB, DP-P2-2TB, DP-T4-2TB, DP-T4-BB... too many!
- Contact:
Yes. We all have, mentioned everytime a new ice thread comes up.
There is stalled talks going on between Korea and Ice to see if they can come up with something more reliable (I say stalled, because I read that Beyonwiz are looking to improve this area, but I don't hear such favourable posts from Daniel at IceTV, Wiz priorities would suggest that this is not #1 on Wiz's list at the moment).
There is stalled talks going on between Korea and Ice to see if they can come up with something more reliable (I say stalled, because I read that Beyonwiz are looking to improve this area, but I don't hear such favourable posts from Daniel at IceTV, Wiz priorities would suggest that this is not #1 on Wiz's list at the moment).
Last edited by tonymy01 on Tue Nov 06, 2007 23:53, edited 1 time in total.
Tony
-
- Apprentice
- Posts: 65
- Joined: Fri Jun 01, 2007 09:15
- Contact:
Not true. We would love to fix the issue, at this stage though it is only affecting the Beyonwiz and we can't see an issue at our end.
We are currently waiting on more information from Steven at Beyonwiz, but he has advised that he will be getting the next firmware out first before sending us anything.
At this stage unfortunately our hands are tied.
We are currently waiting on more information from Steven at Beyonwiz, but he has advised that he will be getting the next firmware out first before sending us anything.
At this stage unfortunately our hands are tied.
Thanks for the response Daniel. This is doing ICETV no good, as I am sure you're aware. I just hope that the next firmware sorts it.danielicetv wrote:Not true. We would love to fix the issue, at this stage though it is only affecting the Beyonwiz and we can't see an issue at our end.
I've had very good success with regards to ICETV over the last year or so, so I'm not about to dump your services, but I can see how frustrated new users must get.
At the moment, the only data I have for ABC TV or ABC HDTV is where I have a recording set. Most frustrating.
Simon....
-
- Master
- Posts: 143
- Joined: Mon Sep 10, 2007 15:17
- Location: Melbourne, Australia (DP-H1 , DP-P1 (x2))
Issue or annoyance?
Around 11am Sunday 18th Nov. i sat down to program the next week's worth of timers, and found EPG only carried through to Wed Night. (4 days worth). This was after having Daniel, 'unblock' my account, the other week...
Do i need to switch BW into/outof Standby to trigger a EPG refresh, (as i tend to leave BW on 24x7) or it should refresh itself periodically? (what is that period?) Am i wrong to expect a minimum of 7 days EPG content at any time ?
Around 11am Sunday 18th Nov. i sat down to program the next week's worth of timers, and found EPG only carried through to Wed Night. (4 days worth). This was after having Daniel, 'unblock' my account, the other week...
Do i need to switch BW into/outof Standby to trigger a EPG refresh, (as i tend to leave BW on 24x7) or it should refresh itself periodically? (what is that period?) Am i wrong to expect a minimum of 7 days EPG content at any time ?
Regards Gary
DP-H1,Firmware=DPH1-01.05.350
DP-P1,IceTV,Wired LAN,Firmware=DPP1-01.05.350
DP-P1 > HDMI > Mitsubishi HC4000 DLP Projector,Vout=1080i,Aout=Optical-passthrough > Yamaha RX-V363,IceTV,Wired LAN,Firmware=DPP1-01.05.350
DP-H1,Firmware=DPH1-01.05.350
DP-P1,IceTV,Wired LAN,Firmware=DPP1-01.05.350
DP-P1 > HDMI > Mitsubishi HC4000 DLP Projector,Vout=1080i,Aout=Optical-passthrough > Yamaha RX-V363,IceTV,Wired LAN,Firmware=DPP1-01.05.350
I'm having a lack of ABC data tonight - good thing there's nothing on air but then there is my network
BeyonWiz T3 and V2
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast
Turned off IceTV and checked the transmitted data. All channels except 7 filled up the guide with about 3 days of full data and then getting a bit spotty. So the ABC problem is probably a BW issue?
BeyonWiz T3 and V2
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast
-
- Apprentice
- Posts: 52
- Joined: Wed Aug 29, 2007 21:22
its no ICE for ABC..
hi there..
am having the notorious no-ABC information on the IceTV subscription..this is annoying, as ABC is the channel most watched in our house..
for what its worth (fwiw) , what I do to re-load IceTV is the following..
1. select IceTV on set-up (obvious!)
2. clear the EPG cache
3. check user info (this seems to cause a reload of EPG data)..
sigh..
any updates on this problem being fixed?
reagrds,
p.tannerford
am having the notorious no-ABC information on the IceTV subscription..this is annoying, as ABC is the channel most watched in our house..
for what its worth (fwiw) , what I do to re-load IceTV is the following..
1. select IceTV on set-up (obvious!)
2. clear the EPG cache
3. check user info (this seems to cause a reload of EPG data)..
sigh..
any updates on this problem being fixed?
reagrds,
p.tannerford
Re: its no ICE for ABC..
Actually the last action isn't required. Tthe BW will automatically refresh the data from IceTv's server.ptannerford wrote:1. select IceTV on set-up (obvious!)
2. clear the EPG cache
3. check user info (this seems to cause a reload of EPG data)..
Teddles
-
- Apprentice
- Posts: 52
- Joined: Wed Aug 29, 2007 21:22
reloading ICE
I've found that when I do the last step, of checking user info, I can watch the log on the bottom of the screen to see where, and how the update is progressing..
just a little more information.
regards,
p.tannerford
just a little more information.
regards,
p.tannerford