Access V2 hard drive from network
Access V2 hard drive from network
I have an SD card in the V2, which is used for timeshift, and an external USB hard drive on the USB3 socket which is used for recordings. I have seen this setup recommended in the forums. However, if I access the V2 via my PC over the network, I can only see the SD card, not the USB drive, which is annoying because I can't access any recordings externally. I can't see any settings on the V2 to make this work. Is it possible to access both SD and USB drives externally?
-
- Wizard God
- Posts: 32705
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Access V2 hard drive from network
Yes, you can, but it can't be set up directly through the normal user interface on the TV screen or via Open Webif.
There are instructions here about how to use a script to set up sharing from the USB device when you also have a microSD card in the V2.
The topic also has some discussion about the issue that you may find useful in the topic that contains those instructions.
There are instructions here about how to use a script to set up sharing from the USB device when you also have a microSD card in the V2.
The topic also has some discussion about the issue that you may find useful in the topic that contains those instructions.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV