Beyonwiz T3 that will not to return to sleep.
Beyonwiz T3 that will not to return to sleep.
I have a Beyonwiz T3 that will not return to sleep after a program recording. I use ICE TV that is programed on the my Apple Desktop. The PVR wakes up from Shutdown records a program and remains on, has done this since new. The PVR has been returned to Beyonwiz and have tested it advising that it returns to sleep as it should. Beyonwiz replaced the unit with a new one and I still encounter the same problem.
I tested the unit in other room to no availe. The problem has Beyonwiz stumped. Has anyone else had this issue , as I don't like to leave the unit swithed on all the time. Any help would be appreciated.
Ross
I tested the unit in other room to no availe. The problem has Beyonwiz stumped. Has anyone else had this issue , as I don't like to leave the unit swithed on all the time. Any help would be appreciated.
Ross
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Beyonwiz T3 that will not to return to sleep.
Have you checked the "After event" setting for the timers?
What firmware are you on?
viewtopic.php?f=50&t=9074&p=122065#p121573
What firmware are you on?
viewtopic.php?f=50&t=9074&p=122065#p121573
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Beyonwiz T3 that will not to return to sleep.
Moved from the DP section of the forum because it's not about the DP series.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Beyonwiz T3 that will not to return to sleep.
Senden seems to be talking about IceTV timers. The IceTV plugin always creates recording timers with "After event=auto".Grumpy_Geoff wrote:Have you checked the "After event" setting for the timers? ...
I have no problem with IceTV recordings returning our T series to shutdown if the recording timer brought the PVR out of shutdown. This wasn't the case with some earlier firmware.
If you shut down the T series while there s a recording running it will go to standby to complete the recording, then shut down.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Beyonwiz T3 that will not to return to sleep.
The post I linked had you stating -prl wrote:... Senden seems to be talking about IceTV timers. The IceTV plugin always creates recording timers with "After event=auto".
I have no problem with IceTV recordings returning our T series to shutdown if the recording timer brought the PVR out of shutdown. This wasn't the case with some earlier firmware.
"In some earlier firmware, the "After event" auto setting didn't work, but it was fixed between the last two public releases, and should als be fixed in the most recent beta.
I tested this on a timer manually set on the T3 (with IceTV enabled) and on an IceTV-set timer, with firmware 20150417 (public release). It worked just fine for me."
I note the 17-Apr-15 firmware (beyonwiz-4.4-beyonwizt3-20150417) had this change entry -
"Wake up by timer now correctly reported. This means it is possible to shutdown, wake up for a recording and then go back to shutdown."
Perhaps Senden is running an earlier firmware than 17-Apr-15.