The main changes in this version, compared to the factory installed front panel firmware:
- Fix failures to wake up from deep standby.
- Fix for clock drift issue, which would cause the device to wake up too early.
- A workaround to recover from occasional T4 lock ups when rebooting.
- Improved LED indication during the power up stage.
- Improved LED indication in response to remote control activity.
- Remote controls from other manufacturers should no longer wake up the T3 from shut down state.
- When front panel is set for continuous scroll repeat, it no longer times out, instead it continues to scroll text indefinitely.
To upgrade:
- Ensure that you are running firmware version 20150417 or later.
- Press the PLUGIN key on the remote.
- Choose "Front Panel Update".
- Press green button to upgrade.
- Press blue button to Download the latest firmware
- Wait.
- The file browser will have a file that looks like xxxx.bin preselected, so press OK
- You will get a screen asking to confirm the upgrade. Select Yes to proceed with the upgrade.
- The firmware upgrade process will now proceed, it is important that you do not power off the T3/T4 until you are told to do so.
- Depending on which version of firmware your old front panel had, your T3/T4 may now reboot by itself. If it does so, you do not need to power off.
- Once you power off, if requested, wait 30 seconds before powering back on.