T3 official firmware link showing 404
T3 official firmware link showing 404
Hi
Is anyone else getting 404 when clicking on T3 firmware link?
Cheers
jangles
Is anyone else getting 404 when clicking on T3 firmware link?
Cheers
jangles
- Attachments
-
- T3 404.jpg (62.9 KiB) Viewed 2997 times
Re: T3 official firmware link showing 404
Not from the link on this page:
https://beyonwiz.com.au/downloads/
That one seems to be working for me.
If you are upgrading now though, I would strongly advise you to step up to the latest 19.3 series firmware.
viewtopic.php?f=56&t=13422&start=250#p182239
This is currently technically still in beta, but it is stable and known to work well.
This will become official in the not too distant future.
The public 17.5 series firmware doesn't have any of the latest channel icons, and won't receive any further updates.
https://beyonwiz.com.au/downloads/
That one seems to be working for me.
If you are upgrading now though, I would strongly advise you to step up to the latest 19.3 series firmware.
viewtopic.php?f=56&t=13422&start=250#p182239
This is currently technically still in beta, but it is stable and known to work well.
This will become official in the not too distant future.
The public 17.5 series firmware doesn't have any of the latest channel icons, and won't receive any further updates.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: T3 official firmware link showing 404
Earlier today there were some problems accseesin gthe forum, now fixed. Perhaps there was the same issue on the BW pages, too.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: T3 official firmware link showing 404
Thx MrQuade ..lol I found a stable beta of 17.5 which is upgrading now I'll upgrade to the 19.3 once it finishes. I'm assuming 19.3 is full usb upgrade?MrQuade wrote: ↑Wed Oct 30, 2019 12:16Not from the link on this page:
https://beyonwiz.com.au/downloads/
That one seems to be working for me.
If you are upgrading now though, I would strongly advise you to step up to the latest 19.3 series firmware.
viewtopic.php?f=56&t=13422&start=250#p182239
This is currently technically still in beta, but it is stable and known to work well.
This will become official in the not too distant future.
The public 17.5 series firmware doesn't have any of the latest channel icons, and won't receive any further updates.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: T3 official firmware link showing 404
Yes. Though if you're upgrading to a 19.3 firmware, you'd probably be best to go straight to the most recent USB version, 20191022.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: T3 official firmware link showing 404
Thanks Peter, I'll download that ine.
A question: I started upgrading to 17.5 before I knew of the 19.3 series and it started ok Booting, Transfer but its been showing "Creating ha" on display now for about an hour. Is that expected or has something gone belly up?
Re: T3 official firmware link showing 404
Yea, that's failed. The flash process should only take 5 minutes or so.
Not sure what "ha" is that it was creating off the top of my head though.
Just retry the process with 19.3 and see how you go.
Just a note though. Have you had the power supply replaced or refurbished in that T3 yet? Almost all T3's power supplies will die due to capacitor failure. The usual symptom is getting stuck during boot with "Beyonwiz T3" showing on the front panel.
If yours hasn't yet been replaced, you may have a unit that's on the verge of failure, and the flash process may be affected.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Re: T3 official firmware link showing 404
Thanks again.MrQuade wrote: ↑Wed Oct 30, 2019 15:42Yea, that's failed. The flash process should only take 5 minutes or so.
Not sure what "ha" is that it was creating off the top of my head though.
Just retry the process with 19.3 and see how you go.
Just a note though. Have you had the power supply replaced or refurbished in that T3 yet? Almost all T3's power supplies will die due to capacitor failure. The usual symptom is getting stuck during boot with "Beyonwiz T3" showing on the front panel.
If yours hasn't yet been replaced, you may have a unit that's on the verge of failure, and the flash process may be affected.
I have had the power supply die and had the capacitor replaced about 4 months ago, hasn't had any issues since.
Re: T3 official firmware link showing 404
Just the one replaced, or did you get it fully serviced with a complete capacitor swap?
The way these supplies fail is that one capacitor will generally fail while the others are still teetering on the edge of failure, but otherwise still working.
You get the failed one replaced, and then the other start dropping off shortly after.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Re: T3 official firmware link showing 404
Only the one.MrQuade wrote: ↑Wed Oct 30, 2019 16:45Just the one replaced, or did you get it fully serviced with a complete capacitor swap?
The way these supplies fail is that one capacitor will generally fail while the others are still teetering on the edge of failure, but otherwise still working.
You get the failed one replaced, and then the other start dropping off shortly after.
Re: T3 official firmware link showing 404
Drop warkus a line to get it fully repaired I reckon.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: T3 official firmware link showing 404
+many
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: T3 official firmware link showing 404
I can now access the download link for the T3 firmware on the Beyonwiz downloads page.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: T3 official firmware link showing 404
Yes, that's 20190207, whereas I believe jangles was attempting to download 20180417 from the topic "New Firmware for (T2/T3/T4/U4) 17/04/2018". The firmware links in that topic give rise to a 404.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: T3 official firmware link showing 404
Grumpy_Geoff wrote: ↑Sat Nov 02, 2019 13:45
Yes, that's 20190207, whereas I believe jangles was attempting to download 20180417 from the topic "New Firmware for (T2/T3/T4/U4) 17/04/2018". The firmware links in that topic give rise to a 404.
You're right, and that link is still giving 404 Not Found.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: T3 official firmware link showing 404
That 17.5-series firmware from last year appears to have been deleted, leaving only the 20190207 version for those models that had it released - http://beyonwiz.com.au/firmware/
Re: T3 official firmware link showing 404
If you recall, PeterU cleaned up all the archived firmware versions for previous major revisions as there was little point in keeping obsolete versions of mature firmware series around.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: T3 official firmware link showing 404
Yep, but I thought he was referring to his own server.
4.4's 20151104, 20160419, and 20160817 are still available from feeds.beyonwiz.org
Re: T3 official firmware link showing 404
I don't have any access to beyonwiz.com.au
I was going to remove old versions on my server, but have not done that just yet.
So, any broken links are definitely not my doing.
I was going to remove old versions on my server, but have not done that just yet.
So, any broken links are definitely not my doing.