Plugin feed offline?

[tyreless]

Is the plugin feed offline now? I'm wanting to install epgrefresh but I can't get my T2 to bring up a list of available plugins.

[Grumpy_Geoff]

Yes, been down since late October.

If you're desperate for EPGRefresh, my guess is you could download the source files (.py, .xml, .png) from - https://github.com/oe-alliance/enigma2- ... efresh/src
and copy them to - /usr/lib/enigma2/python/Plugins/Extensions/EPGRefresh

Otherwise, setup 5 or 6 repeating daily timers as per the example in step 3 -> viewtopic.php?f=50&t=12668&p=172490#p172490
If you're slightly adventurous, use the "AutoVisit" script -> viewtopic.php?f=46&t=12968

[Grumpy_Geoff]

I forgot about "SmartEPGvu+" -> viewtopic.php?f=44&t=15001

[adoxa]

Added EPGRefresh to my feed.

[Grumpy_Geoff]

Added EPGRefresh to my feed.

I thought you might

[tyreless]

Added EPGRefresh to my feed.

I thought you might

And I was hoping he would! Thanks adoxa.

[Paul_oz53]

Added EPGRefresh to my feed.

I thought you might

And I was hoping he would! Thanks adoxa.

At the risk of stretching the friendship, any chance of adding reconstructscap and fstab-editor? These are the other two plugins I regularly use. Demand would be low but, if need be, I'll go the Github route.

Greatly appreciate the initiative of hosting the epgrefresh plugin though I don't use it myself.

[prl]

any chance of adding reconstructscap ... but, if need be, I'll go the Github route.

reconstructscap is in C (or C++), not in Python. That's not necessarily a barrier, but it's not as simple as just putting the source files in the right place on the PVR.

[adoxa]

At the risk of stretching the friendship, any chance of adding reconstructscap and fstab-editor?

Done.

Greatly appreciate the initiative of hosting the epgrefresh plugin though I don't use it myself.

Nor do I, using GG's script.

reconstructscap is in C (or C++), not in Python.

It's been Python for just shy of ten years (createapscfiles is still C++, though).

[prl]

reconstructscap is in C (or C++), not in Python.

It's been Python for just shy of ten years (createapscfiles is still C++, though).

That's what I get for not checking first!

[Paul_oz53]

At the risk of stretching the friendship, any chance of adding reconstructscap and fstab-editor?

Done.

Greatly appreciate the initiative of hosting the epgrefresh plugin though I don't use it myself.

Nor do I, using GG's script.

reconstructscap is in C (or C++), not in Python.

It's been Python for just shy of ten years (createapscfiles is still C++, though).

Thanks Adoxa!

I will be on holiday from tonight so I will upgrade the T4 and U4 shortly.

[Funjunkie6]

i dont seem to be able to view available plugins. is there an issue. T2.

"Some Plugins not available" plus an eTPM issue.

[adoxa]

The domain lapsed and was snatched up by a cybersquatter.

From what I can tell eTPM is only on OpenATV, so you may as well just remove PluginsPanel.

[Funjunkie6]

okay, thanks for the prompt reply

[Funjunkie6]

where do i uninstall the plugins named OpenATV and PluginsPanel.

I searched all through the list of plugins, in the folders below, and the plugins were not located.

i searched via the plugins page and the plugin browser and i did not locate them.

the two screenshots below depict the installed plugins on my T2.

please help.

plugin browser 1.JPG (70.98 KiB) Viewed 586 times

plugin browser 2.JPG (60.43 KiB) Viewed 586 times

Plugins error.JPG (21.02 KiB) Viewed 586 times

and now i have this error, below, but as you can see in the plugin list, the plugin updater is installed.

No such file.JPG (27.01 KiB) Viewed 585 times

[adoxa]

where do i uninstall the plugins named OpenATV and PluginsPanel.

OpenATV is an alternate firmware.

and now i have this error, below, but as you can see in the plugin list, the plugin updater is installed.

Press RED, then select Extensions, you should find pluginspanel & pluginupdater there.

The feeds have been offline for a year, how are you getting these errors now?

[Funjunkie6]

i was recently trying to install the plugin, IceTV, which i did use previously. However the IceTV plugin was not in my list of installed plugins - dont know why.

I received the errors when i tried to locate and reinstall the IceTV plugin. obviously, i was unable to install the plugin because the Updater no longer works.

Do you know how i can download and install the IceTV plugin?

[MrQuade]

i was recently trying to install the plugin, IceTV, which i did use previously. However the IceTV plugin was not in my list of installed plugins - dont know why.

I received the errors when i tried to locate and reinstall the IceTV plugin. obviously, i was unable to install the plugin because the Updater no longer works.

Do you know how i can download and install the IceTV plugin?

Re-install the firmware from scratch. It is a default plugin.