YourTV info

[Grumpy_Geoff]

I've mapped 12 to 1 and 1 to 15 (except for Darwin), so that should fix your problem. I've also adjusted the regional to metro mapping, plus another couple of fixes (recognise yesterday, work on EPG gaps). Hopefully I haven't broken anything else.

Thanks. I've installed it but can't restart due to currently recording, so I'll check the outcome later.

[Grumpy_Geoff]

I've mapped 12 to 1 and 1 to 15 (except for Darwin), so that should fix your problem.

Yep, all Network TEN services work, thanks.

[adoxa]

Looks like YourTV moved 10 Bold to 12, so here's 1.0.4.1 to fix the regional mappings.

[Grumpy_Geoff]

Looks like YourTV moved 10 Bold to 12, so here's 1.0.4.1 to fix the regional mappings.

I get "Show not found" on 10 BOLD - whether version 1.0.4 or 1.0.4.1
All other TEN services show the YourTV info okay.

[adoxa]

YourTV has 12 for Perth, which is the normal LCN, I believe, so it should be working.

I get "Show not found" on 10 BOLD - whether version 1.0.4 or 1.0.4.1

I'll have to fix that, though, it's potentially replacing another error message.

[Grumpy_Geoff]

YourTV has 12 for Perth, which is the normal LCN, I believe, so it should be working.

I get "Show not found" on 10 BOLD - whether version 1.0.4 or 1.0.4.1

I'll have to fix that, though, it's potentially replacing another error message.

Yep, LCN 12 -

Code: Select all

root@beyonwizu4:~# grep 0012 /etc/enigma2/lcndb
eeee0000:1014:0607:0687:00012:00058200
root@beyonwizu4:~# grep 0687 /etc/enigma2/lamedb5
s:0687:eeee0000:0607:1014:1:0:0,"10 BOLD",p:TEN Perth,c:00202,c:012a0,c:02241,c:0382
root@beyonwizu4:~#

Perhaps we'll see the real error once you can get rid of the "Show not found" error.
No biggie, I don't know how long it has been broken as I rarely watch 10 BOLD and want to know the year/series info (whereas I do a lot on 9Rush ).

[adoxa]

I forgot to remove the hardcoded 12 to 1 mapping , fixed in 1.0.5.

No biggie, I don't know how long it has been broken as I rarely watch 10 BOLD and want to know the year/series info (whereas I do a lot on 9Rush ).

The CRID should contain season & episode info (for both 9 and 10) if that's all you want. I'd have to finesse my code for Perth (and your skin), but that shouldn't take much.

[Grumpy_Geoff]

I forgot to remove the hardcoded 12 to 1 mapping , fixed in 1.0.5.

Same "Show not found" on 10 BOLD.

[adoxa]

Here's a version that logs the LCN it uses and the shows it searches (/home/root/logs/yourtv.log). Since nothing was found, it's probably going to be pretty much empty, in which case could you post /tmp/YourTV-2021-03-04-101.json (I think that's what it is)?

[Grumpy_Geoff]

Here's a version that logs the LCN it uses and the shows it searches (/home/root/logs/yourtv.log). Since nothing was found, it's probably going to be pretty much empty, in which case could you post /tmp/YourTV-2021-03-04-101.json (I think that's what it is)?

That version worked.
And before you say I wasn't previously on vers 1.0.5 here's it being upgraded to 1.0.5.1 -

Code: Select all

---------------------------------------------------------------------------------------
1/1: opkg install /media/hdd/Runnables/enigma2-plugin-extensions-yourtv_1.0.5.1_all.ipk
Started: 15:53:59
---------------------------------------------------------------------------------------

Upgrading enigma2-plugin-extensions-yourtv from 1.0.5 to 1.0.5.1 on root.
Installing enigma2-plugin-extensions-yourtv (1.0.5.1) on root.
Configuring enigma2-plugin-extensions-yourtv.

------------------
Finished: 15:54:00

No /home/root/logs/yourtv.log file was created.
JSON has 10 BOLD mapped as 12.

Perhaps your removal of the hardcoded "12 to 1" mapping didn't stick last time?

[adoxa]

No /home/root/logs/yourtv.log file was created.

I don't see how it could have worked and not have created a log (unlike some of my other plugins, this one does require a restart).

Perhaps your removal of the hardcoded "12 to 1" mapping didn't stick last time?

Perhaps. In any event, here's a new 1.0.5.1 without the log (it displays the retrieval day with an initial upper case).

[Grumpy_Geoff]

No /home/root/logs/yourtv.log file was created.

I don't see how it could have worked and not have created a log (unlike some of my other plugins, this one does require a restart).

Oh, I didn't restart on going from 1.0.5 to 1.0.5.1

[Grumpy_Geoff]

Perhaps. In any event, here's a new 1.0.5.1 without the log

I had to uninstall the previous version as it wouldn't allow a "same name" upgrade.
The new version works, and doesn't produce a yourtv.log (as you stated).

(it displays the retrieval day with an initial upper case).

Where is this?

[adoxa]

(it displays the retrieval day with an initial upper case).

Where is this?

In the "status bar": Retrieving YourTV guide for Thu...
The guide is kept for six hours, that might be why you haven't seen it.

[prl]

unlike some of my other plugins, this one does require a restart).

PluginDescriptors can have needsRestart set, but I've never been able to get that to make the slightest bit of difference

[adoxa]

1.0.5.2, with updated LCNs for the 9/10 regional switch (E&OE). Hopefully IMDb will be a bit more reliable, too (I had a few instances of "No details found.").

[Grumpy_Geoff]

On my T4 I've got version 1.0.5.2 installed. I get "Unable to determine LCN".
I don't have the same issue on my U4. The T4 also has IceTVDesc installed - is there a clash?
This isn't a new issue with 1.0.5.2, as I had it with 1.0.4 too but I was too lazy to report it

[adoxa]

On my T4 I've got version 1.0.5.2 installed. I get "Unable to determine LCN".

Strange, that would mean either it couldn't open /etc/enigma2/lcndb (the log would say why) or couldn't find the reference within it.

I don't have the same issue on my U4. The T4 also has IceTVDesc installed - is there a clash?

Shouldn't be, separate functionality.

[Grumpy_Geoff]

Strange, that would mean either it couldn't open /etc/enigma2/lcndb (the log would say why) or couldn't find the reference within it.

Uh oh, look at this -

Code: Select all

-rw-r--r--    1 root     root         10522 Jun 28 11:15 userbouquet.terrestrial_lcn.tv
-rw-r--r--    1 root     root         10193 Jun 28 11:15 userbouquet.terrestrial_lcn.radio
-rw-r--r--    1 root     root             0 Jun 28 11:16 lcndb
-rw-r--r--    1 root     root          2673 Jun 28 11:16 userbouquet.LastScanned.tv

That explains it
Even though there are 60 services in userbouquet.LastScanned.tv, there's nothing in lcndb.

[adoxa]

I'm toying with the idea of switching to names, maybe next month with 9Life/Sky.

[Grumpy_Geoff]

I'm toying with the idea of switching to names, maybe next month with 9Life/Sky.

Revisiting this.
9GemHD gets "Unable to find LCN". 9Gem is fine. (Perth)
Have you missed mapping LCN 95?

Code: Select all

root@beyonwizv2:/etc/enigma2# grep -i 9gem lamedb5
s:0467:eeee0000:0460:1012:1:0:0,"9Gem Perth",p:Nine Network Australia,c:00204,c:0128d,c:02243,c:0382
s:0465:eeee0000:0460:1012:25:0:0,"9GemHD Perth",p:Nine Network Australia,c:00205,c:0223a,c:0385,c:0428f,c:051
root@beyonwizv2:/etc/enigma2# grep ':046[57]' lcndb
eeee0000:1012:0460:0465:00095:00036480
eeee0000:1012:0460:0467:00092:00036480
root@beyonwizv2:/etc/enigma2#

[adoxa]

YourTV has not included 9Gem HD in its guide (web page is the same).

[Grumpy_Geoff]

YourTV has not included 9Gem HD in its guide (web page is the same).

Thanks. I may have a whinge to them.

[Jan]

Hi Jason. In have installed 1.0.5.2, but it is only working on the Ch 10 channels. With all the channels of ABC, SBS, 7 and 9, I get "Could not determine LCN". Any ideas what may be wrong?

[adoxa]

Sounds like the LCN database only contains 10 (have a peek at /etc/enigma2/lcndb). Perhaps do a full scan?

[Jan]

Sounds like the LCN database only contains 10 (have a peek at /etc/enigma2/lcndb). Perhaps do a full scan?

Yes, I saw mention of that with a previous post from Grumpy Geoff. However when I looked at that (lcndb) I got the error message "No viewer for this file". So I copied it to PC and opened it with Notebook and got this:

eeee0000060700001:00038976
eeee0000060700012:00038976
eeee0000060700011:00038976
eeee0000060700010:00038976
eeee0000060700016:00038976
eeee0000060700017:00038976
eeee0000060700015:00038976
eeee0000060700013:00038976

So yes, it looks like just 10. I am currently recording the footy, so I'll do a full scan later. I don't think I have ever needed to do that since I first got her, so will I have to set up my Favourites Bouquet and Autotimers again after that?

[adoxa]

However when I looked at that (lcndb) I got the error message "No viewer for this file".

Press TEXT.

I don't think I have ever needed to do that since I first got her, so will I have to set up my Favourites Bouquet and Autotimers again after that?

No, they should be preserved.

[Jan]

However when I looked at that (lcndb) I got the error message "No viewer for this file".

Press TEXT.

You're kidding me!! I thought that was only for when you wanted to enter text!

I don't think I have ever needed to do that since I first got her, so will I have to set up my Favourites Bouquet and Autotimers again after that?

And that was a lie!! Of course I have re-scanned since I first set up! As I have had it (V2) for over two years, there have actually been new channels in that time! However, when I think about it, I don't recall having to set up the Favourites or Autotimers again, so that's good!

Thanks heaps Jason, and I'll confirm all is good after I do the re-scan.

[prl]

However when I looked at that (lcndb) I got the error message "No viewer for this file".

Press TEXT.

You're kidding me!! I thought that was only for when you wanted to enter text!

Pressing HELP would have let you know that to view or edit a file, you press TEXT. Once in that screen, you can in fact enter text.

OK performs the default action on a file, and the default action is determined by the file's extension. If there's no extension, or an extension that it doesn't recognise, the OK code doesn't know what to do.

[Jan]

However when I looked at that (lcndb) I got the error message "No viewer for this file".

Press TEXT.

You're kidding me!! I thought that was only for when you wanted to enter text!

Pressing HELP would have let you know that to view or edit a file, you press TEXT. Once in that screen, you can in fact enter text.

OK performs the default action on a file, and the default action is determined by the file's extension. If there's no extension, or an extension that it doesn't recognise, the OK code doesn't know what to do.

Peter, unfortunately I have been blessed (???) with the talent of extreme lack of attention to detail!!! While I have used the Help option many times before both in File Commander and in other areas, I sometimes don't notice that there is more than one page of options and I actually need to keep scrolling! It has caught me out a few times! I would like to blame it on "Senior Moments" but in fact it is the story of my life!!

[Jan]

Thanks heaps Jason, and I'll confirm all is good after I do the re-scan.

All good after re-scan! Thanks again Jason, and also thanks for the IMDB patch!!

[adoxa]

1.0.5.3 - make use of a new IMDB plugin feature (able to pass the id).

[Jan]

Hi Jason. I noticed last night YourTV Info wasn't working. While I don't use it daily, I think I have used it successfully within the last week. I thought it may have been a temporary thing, but just checked again, and no go! It lingers awhile on "Retrieving YourTV guide", and then comes up with "Unable to download guide". I am on the latest version, and it usually works just great. Is it just me, or is there an issue at the moment?

[adoxa]

Worked fine for me a couple of hours ago; show info worked just now (guide was already present). Maybe you've got a network problem?

[Jan]

Worked fine for me a couple of hours ago; show info worked just now (guide was already present). Maybe you've got a network problem?

Yep, that was it! Hadn't even noticed the network wasn't connected. Must have had an outage at some point over the last couple of days. Must have been during the night as I hadn't noticed any other devices not having connection. The Wiz can sometimes get a bit cranky when that happens, and won't re-connect without a re-boot! Thanks Jason.