DP-P2 Firmware Step 1.05.xx & 1.07.xx Warning To Others

Beyonwiz HD PVR / Network Media Players including Freeview models.

Moderators: Gully, peteru

Post Reply
User avatar
warkus
Guru
Posts: 712
Joined: Tue Dec 09, 2008 15:14
Location: Perth, WA

DP-P2 Firmware Step 1.05.xx & 1.07.xx Warning To Others

Post by warkus » Fri Jan 28, 2011 10:54

Hi all,

I have now had a strange anomaly twice, and that has prompted me to warn others about this issue.

The P2 as most would know has 2 firmware steps, with either 1.05.xx or 1.07.xx to be installed onto a user?s machine depending on the serial number of their machine. Serial number 1032098B00001 and above use 1.07.xx and below that serial number use 1.05.xx. Unfortunately both will install onto either / or machine.

Well, I have now had 2 separate P2 machines into the workshop, both with 1.05.304 firmware on them, but the serial numbers were 1032098B00xxx &1032098B00xxx. Now if you didn?t check the actual serial number, and just went with the series already on the machine you would install incorrect firmware when updating. The first one a few weeks ago caught me out. I upgraded to the latest 1.05.334 based on the fact that it had 1.05.304 already on it, and on reboot, the machine hung at displaying the version number on the VFD and would not go any further. After checking all sorts of different things, I noticed that the main CPU was the ?LF version found in the 1.07.xx model P2 machines, so I checked the serial number and yep sure enough as above it was in the 1.07.xx range, yet it had 1.05.304 on it, and seemingly from the factory too, as this machine was owned by an elderly retired man with no internet connection so he would not have upgraded it himself, nor is .304 publicly available anyway as I think that was a beta.

A firmware recovery fixed the problem, and allowed me to install 1.07.055 onto the machine and all is well again. The second machine came in yesterday, and when I saw it had 1.05.304 firmware on it, I check the serial number straight away, and again it should be using the 1.07.xx series. A quick check of the CPU also revealed it has the newer ?LF model CPU so it definitely should be using 1.07.xx.

So I thought I should warn anyone that is upgrading their P2 firmware to double check their serial number just in case before they upgrade, as otherwise a firmware recovery seems to be the only way to fix it.

Mark

User avatar
madmax
Wizard
Posts: 4069
Joined: Mon May 28, 2007 22:32
Location: Keilor East, Melbourne

Post by madmax » Fri Jan 28, 2011 11:40

So, in summary, 1.05.304 is okay on a late model P2, but 1.05.334 is not. Presumably a critical change was made to the firmware during this period.

IanB
Wizard
Posts: 1550
Joined: Sat Jan 24, 2009 14:04
Location: Melbourne

Post by IanB » Fri Jan 28, 2011 21:29

Any DP-P2 with an -LF or later stepping chip set, serial number 1032098B00001 and later, must use a firmware built with a compatible toolkit.

That is any 01.07.xxx firmware or 01.05.304 or earlier.

The chip set will deadlock when trying to initialise the video co-processor if a firmware built with the newer "DVD fix" toolkit is installed, i.e. 01.05.305 and latter.

An emergency firmware recovery with a 01.07.xxx firmware is the only way to recover the unit.

==================================================

Older DP-P2 units may use either 01.05.xxx or 01.07.xxx firmware.

The choice is :-
  • 01.05.xxx supports DVD playback from .iso or video_ts directories. Display of H.264 video as used in the 3D trial broadcasts will stutter badly.
  • 01.07.xxx correctly displays all H.264 video. It does not support any form of DVD playback other than raw .vob files.
[/color]==================================================

If there is any doubt then use a 01.07.xxx series firmware.
_

longtimenewb
Newbie
Posts: 6
Joined: Sat Jul 04, 2009 12:16
Location: Sydney

Firmware versions..

Post by longtimenewb » Sat Jan 29, 2011 20:28

Sorry, just to clarify, with my older machine I can use either firmware?

ie. I can use the 1.07.xx firmware with the ability to take drives up to 2tb?
Or maybe I missread.

IanSav
Uber Wizard
Posts: 16846
Joined: Tue May 29, 2007 15:00
Location: Melbourne, Australia

Post by IanSav » Sat Jan 29, 2011 21:40

Hi Longtimenewb,

Be a little patient and you will find that the next 01.05.xxx and 01.07.xxx firmware will both support up to 2TB drives.

Regards,
Ian.

IanB
Wizard
Posts: 1550
Joined: Sat Jan 24, 2009 14:04
Location: Melbourne

Re: Firmware versions..

Post by IanB » Sat Jan 29, 2011 21:44

longtimenewb wrote:Sorry, just to clarify, with my older machine I can use either firmware?
If your DP-P2 can successfully run a recent 01.05.xxx firmware, then it will also successfully run a 01.07.xxx firmware. But why you would want to? :?:

If your DP-P2 has 01.07.xxx firmware then I would definitely not recommend trying to run 01.05 series firmware. The recovery path can be very difficult for the inexperienced.

As I said the choice is DVD playback versus 3D H.264 TS support.

Also 01.07 firmwares gets the aspect ratio ever so slightly (~6%) wrong for LiDiC recordings, if that matters.
ie. I can use the 1.07.xx firmware with the ability to take drives up to 2tb?
I expressed the exact difference between recent 01.05 and 01.07 series firmwares. 2TB drive support is not one of those differences. For the most part 01.05 and .01.07 firmwares released together have identical feature sets within the limits of the toolkit used to build them. Hopefully from versions 01.0x.350 the minor number will indicate this.

01.05.349 and 01.07.069 are the first versions from each series to have partial support for 2TB disks. Neither are public releases.

01.07.052 and 01.05.337 are the first versions that include 3.0.9 dosfstools which resolves the issue with handling certain disk bad format issues.
Or maybe I missread.
More a case of wishful interpretation, I think. :roll:
_

longtimenewb
Newbie
Posts: 6
Joined: Sat Jul 04, 2009 12:16
Location: Sydney

Post by longtimenewb » Sun Jan 30, 2011 15:32

Definitely wishfull..

Thanks for your replies, my 320GB is still working but just a bit full.

prl
Wizard God
Posts: 32697
Joined: Tue Sep 04, 2007 13:49
Location: Canberra; Black Mountain Tower transmitters

Post by prl » Sun Jan 30, 2011 15:41

IanB wrote:Any DP-P2 with an -LF or later stepping chip set, serial number 1032098B00001 and later, must use a firmware built with a compatible toolkit.

That is any 01.07.xxx firmware or 01.05.304 or earlier.

The chip set will deadlock when trying to initialise the video co-processor if a firmware built with the newer "DVD fix" toolkit is installed, i.e. 01.05.305 and latter.

An emergency firmware recovery with a 01.07.xxx firmware is the only way to recover the unit.

==================================================

Older DP-P2 units may use either 01.05.xxx or 01.07.xxx firmware.

The choice is :-
  • 01.05.xxx supports DVD playback from .iso or video_ts directories. Display of H.264 video as used in the 3D trial broadcasts will stutter badly.
  • 01.07.xxx correctly displays all H.264 video. It does not support any form of DVD playback other than raw .vob files.
[/color]==================================================

If there is any doubt then use a 01.07.xxx series firmware.
_
Hi, Ian. I think that this should go into the FAQs somewhere. Prominently :D
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV

User avatar
brianh
Wizard
Posts: 1110
Joined: Wed Aug 29, 2007 10:36
Location: SW Sydney, Australia
Contact:

Post by brianh » Sun Jan 30, 2011 16:37

I've already added it to Firmware Upgrade in the New users FAQ....... but I haven't played with colours or highlighting yet....
Cheers,
Brian


1) 2 x T4, Samsung UA46C7000/Yamaha RX-V6A
2) Spare DP-P2s/ Samsung UA46C6900/Sony STR-DE497/RX-V540
Harmony 650 + all the spare remotes.....

prl
Wizard God
Posts: 32697
Joined: Tue Sep 04, 2007 13:49
Location: Canberra; Black Mountain Tower transmitters

Post by prl » Sun Jan 30, 2011 16:54

brianh wrote:I've already added it to Firmware Upgrade in the New users FAQ....... but I haven't played with colours or highlighting yet....
If you want to re-use IanB's formatting, go to his post, click QUOTE, and then select and copy what's between the quote BBCodes; paste into the destination :D
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV

User avatar
brianh
Wizard
Posts: 1110
Joined: Wed Aug 29, 2007 10:36
Location: SW Sydney, Australia
Contact:

Post by brianh » Sun Jan 30, 2011 20:56

Thanks, Peter..... I do know how, just got carried away in the moment and did whatever came to mind first.... I blame the medication...... :?

I must also apologise for being absent from the forums for a while, I had all good intentions about keeping up the effort on the FAQ but unfortunately health & life generally has decreed otherwise. I'll try to get back into the swing of it....
Cheers,
Brian


1) 2 x T4, Samsung UA46C7000/Yamaha RX-V6A
2) Spare DP-P2s/ Samsung UA46C6900/Sony STR-DE497/RX-V540
Harmony 650 + all the spare remotes.....

prl
Wizard God
Posts: 32697
Joined: Tue Sep 04, 2007 13:49
Location: Canberra; Black Mountain Tower transmitters

Post by prl » Sun Jan 30, 2011 21:25

Hi, Brian. I hope it's not too serious.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV

User avatar
brianh
Wizard
Posts: 1110
Joined: Wed Aug 29, 2007 10:36
Location: SW Sydney, Australia
Contact:

Post by brianh » Mon Jan 31, 2011 08:43

Thanks Peter..... It's not trivial but thankfully not life threatening, in truth the medication is worse than the condition. I can liken it to a Microsoft application - every time it starts up, it steals focus and capitalises all the resources so that the user has to wait until it settles down before attempting to do anything useful... :)
Cheers,
Brian


1) 2 x T4, Samsung UA46C7000/Yamaha RX-V6A
2) Spare DP-P2s/ Samsung UA46C6900/Sony STR-DE497/RX-V540
Harmony 650 + all the spare remotes.....

chris1951
Newbie
Posts: 6
Joined: Mon Feb 09, 2009 10:04

Can I install Dec 2010 Firmware??

Post by chris1951 » Fri Mar 04, 2011 17:42

My DP-P2 has the serial number 10120-79200045, can I install the latest Firmware?
Posts seem a bit confusing?
Checked my BWz, it has Firmware DPP1-01-05-280'
Would I need to install 01-05-334 before installing 01-05-350?
and when I downloaded 01-05-350, I got a message "Windows needs to know which file installed this program" How do I download both files ?
I have Windows 7.
Cheers
Thanx

User avatar
Gully
Moderator
Posts: 7736
Joined: Thu Aug 30, 2007 22:08
Location: Melbourne

Re: Can I install Dec 2010 Firmware??

Post by Gully » Fri Mar 04, 2011 18:33

chris1951 wrote:My DP-P2 has the serial number 10120-79200045, can I install the latest Firmware?
Posts seem a bit confusing?
Checked my BWz, it has Firmware DPP1-01-05-280'
Would I need to install 01-05-334 before installing 01-05-350?
and when I downloaded 01-05-350, I got a message "Windows needs to know which file installed this program" How do I download both files ?
I have Windows 7.
Cheers
Thanx
You can always load the latest firmware and usually should do so, and no you don't need to do the ones in between.

This topic is simply about making sure that you stick to the right series of firmware, so depending on your serial number it is simply about whether you should use 1.05 or 1.07 series.

Both have the same number on the end to signify the release so it will be 1.5.350 if your details are correct.

As for Windows, you need to save the file not try and run it and then either access it from your Wiz via network or on a USB drive.
Cheers
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro

chris1951
Newbie
Posts: 6
Joined: Mon Feb 09, 2009 10:04

Re: Can I install Dec 2010 Firmware??

Post by chris1951 » Fri Mar 04, 2011 20:15

Gully wrote:
chris1951 wrote:My DP-P2 has the serial number 10120-79200045, can I install the latest Firmware?
Posts seem a bit confusing?
Checked my BWz, it has Firmware DPP1-01-05-280'
Would I need to install 01-05-334 before installing 01-05-350?
and when I downloaded 01-05-350, I got a message "Windows needs to know which file installed this program" How do I download both files ?
I have Windows 7.
Cheers
Thanx
You can always load the latest firmware and usually should do so, and no you don't need to do the ones in between.

This topic is simply about making sure that you stick to the right series of firmware, so depending on your serial number it is simply about whether you should use 1.05 or 1.07 series.

Both have the same number on the end to signify the release so it will be 1.5.350 if your details are correct.

As for Windows, you need to save the file not try and run it and then either access it from your Wiz via network or on a USB drive.
Thanks Gully... I don't get the option to save or run the file. I click to download the firmware and when its finished downloading, I get that Windows message!!!
Must be some other way to download?????? Cheers

chris1951
Newbie
Posts: 6
Joined: Mon Feb 09, 2009 10:04

Re: Can I install Dec 2010 Firmware??

Post by chris1951 » Fri Mar 04, 2011 20:33

Gully wrote:
chris1951 wrote:My DP-P2 has the serial number 10120-79200045, can I install the latest Firmware?
Posts seem a bit confusing?
Checked my BWz, it has Firmware DPP1-01-05-280'
Would I need to install 01-05-334 before installing 01-05-350?
and when I downloaded 01-05-350, I got a message "Windows needs to know which file installed this program" How do I download both files ?
I have Windows 7.
Cheers
Thanx
You can always load the latest firmware and usually should do so, and no you don't need to do the ones in between.

This topic is simply about making sure that you stick to the right series of firmware, so depending on your serial number it is simply about whether you should use 1.05 or 1.07 series.

Both have the same number on the end to signify the release so it will be 1.5.350 if your details are correct.

As for Windows, you need to save the file not try and run it and then either access it from your Wiz via network or on a USB drive.
8.30pm. I got it too download to USB BUT when I went to install the FW I got the message. When it went to Verification.. Invalid System Identification !!!! Its on the USB stick 7,812KB.. not having much luck!!!! cheers

User avatar
warkus
Guru
Posts: 712
Joined: Tue Dec 09, 2008 15:14
Location: Perth, WA

Post by warkus » Fri Mar 04, 2011 21:23

Are you sure you have a P2, that serial number looks old, it may be a P1.

Under Setup/System Options/Firmware/Information, you will see your system ID and machine type, check that and post back.

From that serial number it may not be a P2, I have only ever seen P2 units with Serial number 102xxxxxx and above, 101xxxx is usually P1.

Also the model will be stamped on the top of your machine above the blue circle.

I could well be wrong...

Mark

IanSav
Uber Wizard
Posts: 16846
Joined: Tue May 29, 2007 15:00
Location: Melbourne, Australia

Re: Can I install Dec 2010 Firmware??

Post by IanSav » Fri Mar 04, 2011 21:24

Hi Chris1951,
chris1951 wrote:My DP-P2 has the serial number 10120-79200045, can I install the latest Firmware?
All Beyonwiz units can have their firmware upgraded. You just need to be careful to select the correct model number and firmware version.
chris1951 wrote:Checked my BWz, it has Firmware DPP1-01-05-280'
Previously you said you have a DP-P2 now you are saying that you have a DP-P1. These are *different* units.
chris1951 wrote:Would I need to install 01-05-334 before installing 01-05-350?
As the others have advised you, you can go direct to any version number required, you don't need any intermediate versions.
chris1951 wrote:and when I downloaded 01-05-350, I got a message "Windows needs to know which file installed this program" How do I download both files ?
I have Windows 7.
How did you download the file? You should just download the file and save it to disk. Do *NOT* try to install or run the file on your PC.
chris1951 wrote:8.30pm. I got it too download to USB BUT when I went to install the FW I got the message. When it went to Verification.. Invalid System Identification !!!! Its on the USB stick 7,812KB.. not having much luck!!!! cheers
As I noted above you have mentioned two quite different model numbers. You must fetch the firmware for the model of Beyonwiz that you actually have. Installing firmware for a *different* model will result in an installation failure.

Regards,
Ian.

Nifticus
On probation
Posts: 1
Joined: Sat Jan 23, 2010 12:51
Location: Boat Harbour, Tas

DP-P2 serial number and firmware

Post by Nifticus » Sat Mar 05, 2011 15:48

Hi folks
A little confused here. My DP-P2 serial number is 103209AA01xxx. I don't understand which firmware I should be installing.
Cheers

User avatar
Gully
Moderator
Posts: 7736
Joined: Thu Aug 30, 2007 22:08
Location: Melbourne

Re: DP-P2 serial number and firmware

Post by Gully » Sat Mar 05, 2011 16:22

Nifticus wrote:Hi folks
A little confused here. My DP-P2 serial number is 103209AA01xxx. I don't understand which firmware I should be installing.
Cheers
Reads to me you should be using 1.07.xxx but surely that is what you have already?
Cheers
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro

chris1951
Newbie
Posts: 6
Joined: Mon Feb 09, 2009 10:04

Post by chris1951 » Sat Mar 05, 2011 23:01

Sorry guys, it is a DP-P1 I thought it was a P2. Ole timers setting in early!!!!!

IanSav
Uber Wizard
Posts: 16846
Joined: Tue May 29, 2007 15:00
Location: Melbourne, Australia

Post by IanSav » Sat Mar 05, 2011 23:54

Hi Chris1951,

DP-P1s use the 01.05.350 firmware.

Regards,
Ian.

mickotab
Newbie
Posts: 4
Joined: Tue Mar 08, 2011 20:12
Location: Newcastle, Australia

Post by mickotab » Sun Mar 13, 2011 14:31

Could someone please clarify where they are getting the serial numbers from please?

In previous posts it has been stated like.....1032098B00001 with a 'B' in the middle of the number.

Is this serial number from the back of the dp-p2 box or from the setup screen?

My serial number on the back of the box does not have any letter at all in it. I can't check the internal serial via the menu as I'm waiting for my PSU repair.

Thanks

prl
Wizard God
Posts: 32697
Joined: Tue Sep 04, 2007 13:49
Location: Canberra; Black Mountain Tower transmitters

Post by prl » Sun Mar 13, 2011 14:47

mickotab wrote:Could someone please clarify where they are getting the serial numbers from please?

In previous posts it has been stated like.....1032098B00001 with a 'B' in the middle of the number.

Is this serial number from the back of the dp-p2 box or from the setup screen?
On the back of the box. There isn't a serial number in the setup screen. System ID (internal model number), firmware version, loader version, internal HDD type string, yes, but no serial number.
mickotab wrote: My serial number on the back of the box does not have any letter at all in it. I can't check the internal serial via the menu as I'm waiting for my PSU repair.
...
If you had firmware from the 01.05 series installed, continue using firmware from that series, similarly if you had firmware from the 01.07 series, continue with that.

If you'd like confirmation, you could post the serial number. That's more likely to get a response than saying what the serial number doesn't look like.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV

mickotab
Newbie
Posts: 4
Joined: Tue Mar 08, 2011 20:12
Location: Newcastle, Australia

Post by mickotab » Sun Mar 13, 2011 14:54

prl wrote: If you'd like confirmation, you could post the serial number. That's more likely to get a response than saying what the serial number doesn't look like.
thanks for that Peter... will post when I get home and have another look at it

mickotab
Newbie
Posts: 4
Joined: Tue Mar 08, 2011 20:12
Location: Newcastle, Australia

Post by mickotab » Sun Mar 13, 2011 20:26

prl wrote: If you'd like confirmation, you could post the serial number
ok... I have a serial number of 1022088200184..... which would me I will be using the 01.05.xxx version.... correct?

thanks for your help

IanSav
Uber Wizard
Posts: 16846
Joined: Tue May 29, 2007 15:00
Location: Melbourne, Australia

Post by IanSav » Sun Mar 13, 2011 22:51

Hi Mickotab,

1022088200184 looks like it is less than 1032098000000 so 01.05.350 is the appropriate firmware for that serial number.

Regards,
Ian.

IanB
Wizard
Posts: 1550
Joined: Sat Jan 24, 2009 14:04
Location: Melbourne

A warning!

Post by IanB » Mon Mar 14, 2011 16:16

A warning!

A friend has just bought himself a DPP2TB which came with 01.07.069 firmware.

Included in the packaging was a 2GB usb stick in a little white box labelled "DP-P2". On the stick was a single file "DPP2_Firmware_30Nov2010_ver_DPP2-01.05.350.wrp".

The unit serial number is 1032099A0xxxx so requires a 01.07.xxx series firmware. Fortunately I was on hand to help set it up and spotted the wrong firmware.

I've been away for the long weekend and haven't had time to chase up where he purchased the unit, but I'll check this out further now I am back.

Post Reply

Return to “DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1”