DP-P2 Dead?

[Sandy B]

My old DP-P2 appears to have died, upon start up I get "ERRO 0000" appearing on the from panel with no display on the TV.

Does anybody know what the problem could be and if it is worth repairing.

[prl]

It's likely to be a failed power supply, though there are other possibilities, like a flash memory failure (which can in turn be caused by a power supply failure, or even it just going out of spec),

DP-P2 power supplies are quite repairable, and there are DIY instructions on how to do it in this part of the forum (see the stickies).

If you don't feel up to a DIY job, Warkus (Mark) on the forum has an excellent reputation for Beyonwiz repairs, including power supply repairs (he's repaired a DP-S1 and a T4 for me).

His real-life contact details can be found at http://www.decisivecomputersolutions.co ... ntact.html

[MrQuade]

As prl says, a dead power supply looks to be the most likely cause.

I personally don't think a DP series is worth repairing at this point. Perhaps hold onto it and look and see if Beyonwiz do a trade in offer for a V2 down the road.

[Sandy B]

I personally don't think a DP series is worth repairing at this point. Perhaps hold onto it and look and see if Beyonwiz do a trade in offer for a V2 down the road.

Thanks for the advice, out of interest would the HDD from the DP-P2 fit into the new I personally don't think a DP series is worth repairing at this point. Perhaps hold onto it and look and see if Beyonwiz do a trade in offer for a V2 down the road.2

[prl]

I personally don't think a DP series is worth repairing at this point. Perhaps hold onto it and look and see if Beyonwiz do a trade in offer for a V2 down the road.

Thanks for the advice, out of interest would the HDD from the DP-P2 fit into the new I personally don't think a DP series is worth repairing at this point. Perhaps hold onto it and look and see if Beyonwiz do a trade in offer for a V2 down the road.2

The V2 doesn't take an internal disk, only USB or microSD. You'd have to put the P2 HDD into a USB case and plug that into the V2. You wouldn't be able to play the P2 recordings as-is on the V2. They'd have to be converted into single .ts files, for example with YARDWiz.

[Sandy B]

You wouldn't be able to play the P2 recordings as-is on the V2. They'd have to be converted into single .ts files, for example with YARDWiz

Tried to Google WARDwiz but nothing comes up, any idea how I can get YARDwiz

[blip]

Thread here https://beyonwiz.com.au/forum/viewtopic.php?f=4&t=6351
and downloads here https://bintray.com/lukepinnerau/generic/YARDWiz/1.1
and more info here https://github.com/lpinner/yardwiz/blob ... /README.md

[Sandy B]

Many thanks to all.