WizMac v0.7 and 280 firmware - New issue?
WizMac v0.7 and 280 firmware - New issue?
Can any other fellow Mac users let me know if they are still able to connect to the Wizzy with the latest WizMac (v0.7) and Wizzy (280) firmware? I had previous nil problems, but now with the latest firmware installed WizMac 'stalls' on retrieving file list. I used to be able to retrieve the file list in about 1-2 seconds, now I can't even do that?
So many gadgets, so little time...
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
The structure of the names inside the index.txt file have changed, but fetching index.txt should take no longer. I can't think of anything in the changes to index.txt that would break getWizPnP. The changes I made to it were to take advantage of new information encoded in what I had been treating as simple strings up to .261. This allowed me to do folder selection and sorting by name. I don't know why WizMac would have problems, but I've never looked closely at the code. If Eric (efry) doesn't respond here, try PMing him.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: WizMac v0.7 and 280 firmware - New issue?
I have problems too, using WizMac v0.7 on OS X 10.4.11 (PPC), connecting to a P1 running firmware 280. It hangs for a while at "Retrieving file list. (58/61)", then crashes.Vatoe wrote:Can any other fellow Mac users let me know if they are still able to connect to the Wizzy with the latest WizMac (v0.7) and Wizzy (280) firmware? I had previous nil problems, but now with the latest firmware installed WizMac 'stalls' on retrieving file list. I used to be able to retrieve the file list in about 1-2 seconds, now I can't even do that?
Code: Select all
Thread 0 Crashed:
0 <<00000000>> 0xffff8a50 __memcpy + 688 (cpu_capabilities.h:189)
1 com.apple.CoreFoundation 0x907bcea0 __CFStringCreateImmutableFunnel3 + 1896
2 com.apple.CoreFoundation 0x907c772c CFStringCreateWithSubstring + 564
3 com.apple.Foundation 0x92bff308 -[NSCFString substringWithRange:] + 172
4 org.openwiz.WizMac 0x000048d4 -[WizIndex loadNextWizFile] + 192
5 org.openwiz.WizMac 0x00005b08 -[WizConnectDownload connectionDidFinishLoading:] + 108
6 com.apple.Foundation 0x92c27870 -[NSURLConnection(NSURLConnectionInternal) _sendDidFinishLoadingCallback] + 188
7 com.apple.Foundation 0x92c25adc -[NSURLConnection(NSURLConnectionInternal) _sendCallbacks] + 556
8 com.apple.Foundation 0x92c25834 _sendCallbacks + 156
9 com.apple.CoreFoundation 0x907df300 __CFRunLoopDoSources0 + 384
10 com.apple.CoreFoundation 0x907de830 __CFRunLoopRun + 452
11 com.apple.CoreFoundation 0x907de2b0 CFRunLoopRunSpecific + 268
12 com.apple.HIToolbox 0x932adb20 RunCurrentEventLoopInMode + 264
13 com.apple.HIToolbox 0x932ad1b4 ReceiveNextEventCommon + 380
14 com.apple.HIToolbox 0x932ad020 BlockUntilNextEventMatchingListInMode + 96
15 com.apple.AppKit 0x93792734 _DPSNextEvent + 384
16 com.apple.AppKit 0x937923f8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
17 com.apple.AppKit 0x9378e93c -[NSApplication run] + 472
18 com.apple.AppKit 0x9387f458 NSApplicationMain + 452
19 org.openwiz.WizMac 0x00002914 _start + 760
20 org.openwiz.WizMac 0x00002618 start + 48
-
- Apprentice
- Posts: 61
- Joined: Sat Feb 16, 2008 13:56
- Location: Wollongong, NSW
Hi Guys,
I've found the issue. There was a slight change to the index file format in this firmware release which adds directory support.
This is currently causing wizmac to crash. I've got a fix for the problem but I'm in the middle of changing computers so my files are all over the place. I'll try to commit it to openwiz and make a new release either tonight or over the weekend.
If you're in a super hurry to get it working and can compile from source then just add the following if statement
after the line
in WizIndex.m
This will filter out the new directories in the listing.
Regards,
Eric
I've found the issue. There was a slight change to the index file format in this firmware release which adds directory support.
This is currently causing wizmac to crash. I've got a fix for the problem but I'm in the middle of changing computers so my files are all over the place. I'll try to commit it to openwiz and make a new release either tonight or over the weekend.
If you're in a super hurry to get it working and can compile from source then just add the following if statement
Code: Select all
if(range.location == NSNotFound) //skip directories
continue;
Code: Select all
range = [line rangeOfCharacterFromSet: [NSCharacterSet characterSetWithCharactersInString: @"|"]];
This will filter out the new directories in the listing.
Regards,
Eric
-
- Apprentice
- Posts: 61
- Joined: Sat Feb 16, 2008 13:56
- Location: Wollongong, NSW
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Eric, feel free to look at the code for that in getWizPnP.Vatoe wrote:Ditto here. While your at it, add that delete file functionarmiller45 wrote:Thanks Eric. No great hurry - I'm happy to wait until you get around to it. Well done!
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Apprentice
- Posts: 61
- Joined: Sat Feb 16, 2008 13:56
- Location: Wollongong, NSW