No picture with Lidic
No picture with Lidic
Hi, I am new to all this technology but am still trying to get it all happening even though it is doing my head in.! I have got a dp-lite and a lidic and want to run foxtel through it so I can record it as well. I have got sound but no picture when on the Lidic channels.?? Can anyone help me please?? I have the lidic usb to the bw and have the bw hdmi to the tv. I have foxtel (red,white,yellow )plugged into the lidic and I have the antenna cable running from the wall to the bw and then rf loop cable running from bw to the tv. Am i doing it all wrong?? HELP!
Last edited by lujash on Tue Jun 29, 2010 19:52, edited 1 time in total.
Might help if the title is changed from No sound to No picture! That way people know whato expect.tonymy01 wrote:oh bummer, I misread your message completely. Ok, you need to set your Foxtel to composite output, and the lidic to composite input.
lujash, you can edit your first post to fix that.
Cheers
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro
Ok, I am sorry but I am really having a dumb moment... Could you please explain exactly what cables I need to hook up and where they go... At the moment I have the foxtel (Red,white and yellow) going straight into the lidic... THe lidic is usb'd up to the bw and the bw is HDMI'd into the tv. There are 3 places on the lidic for cables... does it matter where I put the foxtel? I am sorry to sound so dumb about this and am eternally grateful for all and any help I get!
Thanks!
Thanks!
Hi Lujash,
Check the LiDiC manual or look very carefully at the back of the LiDiC. There are two input areas for channels 950 and 951 respectively and 1 passthrough output area. It would probably be easier if you connect Foxtel to input #1. On the Beyonwiz remember to configure the LiDiC. Set the LiDiC to Enable, Display as required, Input 1 to Composite and Video Type to PAL.
Ensure that the Foxtel box has been programmed to output a signal on its composite terminals (the red, white and yellow terminals).
Selecting channel 950 on the Beyonwiz should give you the feed from the Foxtel box.
Regards,
Ian.
Check the LiDiC manual or look very carefully at the back of the LiDiC. There are two input areas for channels 950 and 951 respectively and 1 passthrough output area. It would probably be easier if you connect Foxtel to input #1. On the Beyonwiz remember to configure the LiDiC. Set the LiDiC to Enable, Display as required, Input 1 to Composite and Video Type to PAL.
Ensure that the Foxtel box has been programmed to output a signal on its composite terminals (the red, white and yellow terminals).
Selecting channel 950 on the Beyonwiz should give you the feed from the Foxtel box.
Regards,
Ian.
Ok....success! thankyou so much.. I had configured the lidic on pal etc before but i have somehow got it working... the only thing is it is an ordinary picture... is this because it is the composite cables?? is the s-video a better picture. I will try and see if it records now! thanks sooooo much for being so patient with me!
I don't really know how to check if the foxtel box has been configured? anyway it is working but the problem is the very ordinary picture.. any suggestions??
Thankyou
I don't really know how to check if the foxtel box has been configured? anyway it is working but the problem is the very ordinary picture.. any suggestions??
Thankyou