Page 1 of 1
Installing LiDiC
Posted: Sat Mar 29, 2008 17:07
by raymundy
Hi folks
After buying a ps1, I have now gone one step further to the LiDiC.
Having trouble installing the unit.
I have Foxtell so i want to connect that to the LiDiC. Do I need to rescan the stations or does it automatically detect the LiDiC?
I upgraded the firmware only last week. Do I need to obtain firmware for this unit and so where from.
Thanks for your help
Ray
Posted: Sat Mar 29, 2008 17:24
by Gully
You need at least version 197.
Have you gone into setup and enable the LiDiC and relevant settings?
Installiong LiDiC
Posted: Sat Mar 29, 2008 23:44
by raymundy
Thank you
Excuse my dumbness about this but how do I go into settings and set it up. Have had a look and can't even find the LiDiC settings in there. I think I have firmware update of 192 and I thought that was the latest.
Thanks again and jind regards
Ray
Posted: Sun Mar 30, 2008 01:28
by Gully
Well as I said in the last post - download and install the latest firmware and then you will see the options.
192 is not the latest and has no LiDiC support.
Posted: Sun Mar 30, 2008 13:05
by raymundy
Thanks Gully. got the latest firmware and have setup the LiDiC but cannot get a picture or sound from my Foxtell box.
Any clues would be much appreciated
Thanks
Ray
Posted: Sun Mar 30, 2008 13:17
by Gully
Have you selected the LiDiC services through the services list?
Installing LiDiC
Posted: Sun Mar 30, 2008 13:24
by raymundy
yes and There are the two lidic stations 950 and 951. When I select one all I get is a crackling noise from the speakers
Regards
Ray
Posted: Sun Mar 30, 2008 19:48
by DaveR
How have you got it hooked up?
For me I just set it to:
LiDiC = Enable
Display = Full
Input 1 = Composite
Video Type 1 = PAL
Input 2 = S-Video
Video Type 2 = PAL
I also have to have the Audio Format, in the A/V Output menu, set to 5.1ch or I get no audio. Then I connect any S-Video equipment to Input 2 and switch the beyonwiz to ch 951.
You are watching via the normal beyonwiz outputs? Not via the LiDiC's Monitor output?
Installing LiDiC
Posted: Sun Mar 30, 2008 21:19
by raymundy
Thanks for all your help.
I seem to have got it working but don't really know what I did.
Regards
Ray