Beyonwiz Australia

juzzman

Hi Tezza007 I am seeing the same as you , in the vertical EPG listing, the up and down arrows move the list by a page.

juzzman

IceTv are at it again.

http://www.icetv.com.au/emails/christmas_2010/

juzzman

I am having the same trouble with wiztv pod casts . They start copying then within 5-10 seconds they stop but only on the S1. The same podcast on my H1 works fine using the same router and cable,downloads within 5 minutes of each other. The podcast was skydiver cheats death. All others i have tried ...

juzzman

I can't copy in either direction - to or from the H1. From the H1 to the network, when I press Select Folder to try to start the copy, it just exits. When I try to copy from the net to the H1, and I press Copy To, I get a menu with HDD/Network/USB, but it only allows HDD to be selected. I can't mov...

juzzman

Thanks for the info tonymy01, cool i can live with it for now.

juzzman

Trying not to be to harsh on Beyonwiz after such a good firmware update (01.05.261), but if you move a twiz file out of the recordings folder on your S1/P1, then try streaming that file with your H1 ,it will not play . All files show up on the list ,but only files in the recordings folder will play....

juzzman

Just read the Age review. How can they say that Tivo has a 160 gig HDD and can record 25 hours of HD, then say the Topfield and DP-P2 have a 320 gig HDD, but can only record 30 hours of HD. I know the timeshift takes up a bit, but not 128 gig. Are they just bias towards Tivo or does it record in a d...

juzzman

DP-P2 on Beyonwiz site now.

Both .au and .com

juzzman

HDD Bug check Test. I ran each scenario five times and this is what happened. Scenario 1. * Network connected. * Internet disconnected . * Ice guide enabled * Set view timer. * Turn off BW. * View timer brings the unit out of standby. * Timer finishes puts unit back to standby. Result. 4 out 5 tests...

juzzman

I just ran scenario 3 five times and 3 of them produced the HDD check. (but not every second one, Test 1, 3 , 4)

No wizremote here, no hacks at all.

Bugger, i will have to check the other scenarios 5 times each and with record timers.

Wow 45+ tests that could take a while.

juzzman

Juzzman, can you please fix your sentence structure up a bit to make more sense? You start a sentence with an "and" using lowercase, and I have to wonder if you mean when you do all the above AND shutdown later, it is ok, but if you do all the above and don't shutdown later, it is not ok,...

juzzman

I have been testing this a bit,on DS-P1 firmware 01.05.247 i can only reproduce the bug when you set a view timer, not record Timer. Also only if the timer brings the unit out of standby. It happens with network connected and disconnected. with network connected but internet not. and using the shutd...

juzzman

Peter, I have been able to reproduce BUG 1.d (or very similar ). BTW on 01.05.247. The difference i found was the name of the second timer in the timer list is correct, (e.g. Name of program) but the name of the recorded file has the channel name. Same with pop-up\recording information box, names th...

juzzman

Anyone else think this should go on the wish list? Enhancement requests What about the ability to use your H1 as a sever( not just client ) for streaming . I know it is sold as a client for the P1 or S1, but with a usb HDD it can record too. It would take one step out of viewing on a S1\P1 (Don't ha...

juzzman

The H1 has always been a client It's just not able to become a server :D I should have been clearer , on the beyonwiz site their is a concept page with a house layout with orange dotted circles. The one on the right pops up with media client and a picture of a H1, the picture and H1 heading was not...

juzzman

I have noticed a few changes on the beyonwiz .au site like they have listed the H1 under media cleint in beyonwiz/concept. Then i looked at S1 features i cant be 100% sure but i think this has changed. Some were there ,some are new Could be a hint of whats to come. Features to be Updated * ? Back-up...

juzzman

I haven't had that error or freezes on startup with 235 (but had it once with 232). But... can someone who is at their wiz please test this: start a quick recording of a short show, hit the power/standby button, but choose "later" (I say short so you don't have to wait long for the shutdo...

juzzman

Peter , I know we have passed 1.05.192 but i thought i would check 1.05.235. (c) Still the same. (d) Still the same. (e) Still the same. (f) Still the same. With pop up / timer list , you get a warning on exit without a hdd attached with timers in the list. Have not checked without dont want to upse...

juzzman

1.05.235 has not been passed on to the beta testers before release. If anyone finds regressions, please do not have a go at the beta testing team. I for one wouldn't blame the beta testers, and i think 99% of the people here would not either,you guys do a great job. Maybe this was forced on them by...

juzzman

Thanks prl , I asked the same Question at the same time in a different thread.

I deleted all old timers and reset them .

Ice remote shows them fine now.

juzzman

Are we supposed to see timers set on the BW in iceRemote?

Done a bit of testing and it looks like you can only see timers set on your BW
that have been set up with 01.05.232 firmware. Not timers set on older Firmware

Anyone seeing the same result.

juzzman

Just on the Device Number i put 2 different usb drives in the same port and it called the first one " Device1 " and the second " Device2 " Will Try a 3rd and all move them to different ports Edit: USB_DISK = Front usb port Unit0_P1 = Back usb port Device Number starts at 1 and mo...

juzzman

Hi guys i am probably telling you something you already know .

I am new to linux and telnet etc, trying to learn as i go but i found
where the usb,s are mounted

/var/tmp/mnt/usb/Device?/USB_DISK/

a number goes where the ? is mine was 2

Hope i am not just pointing out the bleeding obvious

juzzman

I was just on the beyonwiz site (.com not .com.au) and under support there is a forum link,which goes to another page that shows "coming soon" Was this meant to be linked to this site, or a future forum, or just there in case. Just something i noticed as there has been a bit of talk about ...

juzzman

Thanks Gary , I am sure i was using v0.686 stable version of freenas, but i cant check as the computer M/B i was using for freenas died the other day. it was only a couple of years old , switched it off one day then turn it on the next No post beeps no nothing tried to flash the bios from a dos boot...

juzzman

Thanks Ian i will do that soon .
But i have taken out freenas and am working on ubuntu 7.10
which by the way works fine the bw , shared network folder wise
not talking about wizfx software

regards Juzz

juzzman

Hi lammy, No tried lots of ways of doings this but i am stumped. Sorry i am new to lunux (eg freenas ) but i can see my shares on windows write delete full access. So cifs and nfs is setup But on the bw sp1 i see freenas and i can see my shares but i can not access them (eg bw network screen sits th...

juzzman

Thanks tonymy01 ,i tried that and yes if you don't touch the power button it doesn't turn off. So i think it has not crashed, it is just taking a long time to respond. looking at the network traffic graph in freenas when i enter the freenas shares in bw network screen i get 3and 4 bytes going in and...

juzzman

Hi Ian Yes the bw crashes. EG . all buttons on the remote do not respond and if you leave it for a couple of minutes it turns off. I think i remember the bw crashing and turning off before but for a different problem. I can't try anything tonight as it is recording and i don't want it to crash Will ...

juzzman

A question to anyone that has got beyonwiz to work with freenas . I saw Dr Phil got this to work but i have freenas up and working fine on pc , but the bw is another story. Freenas shows up in bw network and even the shared folder but if i try to access the folder the bw locks up and after a few min...

juzzman

Sorry i should have been more clear ,not for playback on bw they will not play on computer
eg Power dvd etc
funny SD files work but HD ones Wont are they the same type of file ?

juzzman

I have been trying to download files from my bw using wizfx with preferences to ts and have been successfully with files recorded from a SD channel but when i try a file recorded from a HD channel i get corrupt files Eg No sound some that will not play at all and some that come up as mepg1 but it is...

juzzman

Sorry never thought of that

juzzman

Just a thought, is there any way those that run this site could change Users profile to have beyonwiz Model & Firmware number ,so people could enter this info and it would show up under their user name This would help all who our tying to help If this is too hard could we just encourage people t...

juzzman

tpyoon wrote Yep Razz ordered one on firday afternoon from Harvey Norman, apparently there is lots of stock available but no one seems to be ordering them. They would not deal much, payed $550 Should be here today/Tomorrow. It would be great if you could give your opinion on the H1, when you get som...

juzzman

It's nearly the end of September, has anyone seen one of this in a store?

Has anyone got one?

juzzman

Not sure if this is a bug or i just loaded up the bw S1 to much Doing some quick cropping of adds from recordings, as i wanted to reformat the HDD. After i had removed a few adds successfully eg. mark A point with yellow button,mark the B with blue button, menu comes up , click on crop, then croppin...

juzzman

This happen to me also, recording two SD channels and chaseplaying one of them the whole thing locked up, only after 10 or 20 seconds bw reset and was ok.

September firmware

i did do factory reset

and hdd format

just put this in case bw want to know

juzzman

Martyn Said Given the BW can play files from a network location and an attached USB drive, I can't see why anyone would want to transfer to a device designed to record TV. My thinking was ,if you have Two S1's or a S1 and a P1 you might have recordings on either unit that you want to watch on the ot...

juzzman

Just been looking at the new manual ,in the wizpnp section it sound like it only a one way
sharing set up

Quote from the manual

*The WizPNP server can not get a file from a WizPNP client.

or am i just reading this wrong?

juzzman

Maybe that is so,but what about all the other appliances around your home sitting on
standby, waiting for you to use them for maybe a couple of hours.
Forget global warming, what does this cost you every year?
hmm; Money that could be spent on great products like a bw or 2

juzzman

Just Testing

Search found 42 matches

Re: Have now recieved my T3 - All good with delivery.

IceTv Xmas Sale on subscriptions

Whats in the Future for Beyonwiz

Forum Link

freenas with bw

Downloading HD files with wizfx

Beyonwiz Model and Firmware Number in profile

File edit feature bug?

Test

About the Forum

Search found 42 matches

About the Forum

Join us