Beyonwiz Australia

Half Round

I use on of these in the 'HiFi' cabinet to provide signal to the various items that need it -
https://www.bunnings.com.au/antsig-4-wa ... r_p4360393
It works well. Also it does have a gain control. They also have a two outlet model.

Half Round

Hi adoxa The MF910Z has been around for a while. The Telstra Prepaid 4GX Hotspot Black MF985T is a bit of a step up. Max data rate goes from 150Mbps to 600Mbps and wifi is dual band with max 20 connections. It also has 2 antenna ports. Do you have a nearby Telstra shop or Officeworks where you could...

Half Round

Thanks everyone.

Half Round

Hi Dennis I used a Silent 5 to replace the fan in a T4. The original had a nameplate rating of 80mA. Compared to the original, the Silent 5 was a bit noisier but moved more air, which I wanted. A series resistor would lower the current and noise (as well as airflow).

Half Round

I have used fans from
https://quietpc.com.au/casefans
There is a large variety and they are airmailed in.
You may need to change the plug and/or leave the third sensor disconnected for the U4

Half Round

The front display in our T4 was starting to look tired with uneven brightness and a few missing rows. A replacement display was found on international ebay.com (not .au). It is listed as: White Serial SPI Graphic 3.2" OLED Display Module 256x64 w/Tutorial,Connector Seller : buydisplay The EastR...

Half Round

Our T4 is in a TV cabinet. I have fixed the regulators but on hot days still getting the self rebooting problem. After reading through the forums I decided to upgrade the rear fan. First I cut out the metal grill and replaced it with a 3D printed one. The fan was then replaced with a wider 15mm sile...

Half Round

Hi Gents, Watched the waveform with a DSO on the fan supply when varying normal speed. Fan stops at zero and starts again on first increment of bar. Checked and found similar when adjusting standby bar and then switching to standby. However not relevant now as I wired the fan to the HD 12V supply. I...

Half Round

I reloaded the firmware from USB and carried out the setup from new steps. There is no change. The T4 is set to go to standby on Power button short press. When I go to standby and a recording is in progress, the fan stops - confirmed visually. At the end of the recording it starts again ( and record...

Half Round

Hi Peter, I am using the remote and the T4 is set to respond to 02F2 control set. Using your 2 examples, my unit fan stops when an item is being recorded and power is short pressed. The fan comes back on after recording if unit is in standby mode. Only other change to the T4 is my fix for 3.3v regul...

Half Round

Hi GG how do I find the log you have quoted from?
I may need to continue later as T4 is in use

Half Round

After reading about the fan speed settings for the T4 I set both Normal and Standby to near maximum. If the T4 is set to go to standby with a press of the power button, it sits in standby (clock showing) with the fan running. However, if it is set on and a current program set to record and the the p...

Half Round

PM sent

Half Round

My guess is the system time on your Wiz has gone haywire. It went back roughly an hour just after 2pm - Is time set from the network (NTP) or from the broadcast signal? Hi Gents, Thanks Geoff, I missed that trick. After reading your reply I went and checked the time setup. It was using station time...

Half Round

Hi, I installed AutoVisit v1.3 on a V2 and T2. a few days ago On the V2 yesterday something strange happened on the recordings. firmware 19.3 Build 20201011 (beta) The recording list had multiple entries for a single recording. Picture of screen, movie file list and autovisit log attached. movies-fi...

Half Round

csutak40 wrote: ↑
Sun Oct 04, 2020 17:35

I haven’t had a reply from Mark, so obviously the answer from him is no.

Hi Judy,

I read round one of the forums that Warkus (Mark) has been snowed under during this lockdown and 'Eastern Aus' jobs are at the bottom of the list at present. Keep trying

Half Round

Hi Peter, However, the button press immediately before the crash was EXIT, and it seems to have been pressed when a popup message was shown (not the "Recording in progress" popup you get when you delete a running recording). Exit is our 'get out of a problem' button (again on Harmony remot...

Half Round

V2 with external double tuner crashed when deleting running recording among others being recorded. Unit froze with small picture in centre of screen with surrounding black area. At top of screen was message about sending in crash log . This was follows by message that unit would reboot in 10 seconds...

Half Round

This seems to be another manifestation of a problem that has happened before. There are several variations and unfortunately no definitive answer that I can see. Here is a similar thread; http://www.beyonwiz.com.au/phpbb2/viewtopic.php?t=7058&postdays=0&postorder=asc&start=0 It may give ...

Half Round

Hi GarFin,
Have you rebooted the switch (and any other network devices)?

Half Round

Thanks Mark,
Another one saved before damage occurred (it is the backup machine).

Half Round

One way if you are adventurous. I believe the S1 is flaky with anything other than WEP. Find a cheap wireless N router that can be be flashed with DD-WRT. Flash it and then set it up as a wireless bridge (client bridge). Read the DD-WRT wiki. You then have several sockets to Ethernet wire to. I have...

Half Round

techguy wrote:here's the answer:

U28geW91IHJlYWxseSB3YW50IHRvIGtub3cgaG93IEkgZGlkIGl0PyBXZWxsIGl0GXMgYWxsIGluIHRoZSBzZWNyZXQgc2F1Y2UsLCwuLi4uLi4uLi4uLi4uLi4uLg==

An interesting bit of hex. Now is it all before or all after, or sections of before and after.
I'd like to buy a vowel please

Half Round

There are two shows on. One after the other, which I want to record. Stupidly it won't let me record them both with overlaps - even when there aren't any other recordings happening. This seems such a ridiculous limitation, yet my old Toppy worked the same way, and Windows Media Centre is the same t...

Half Round

A SATA / IDE convertor can be used for later drives. Warkus has previously supplied a suitable convertor.
Have a read of this thread :-
http://www.beyonwiz.com.au/phpbb2/viewt ... xperiences

Half Round

hi tipscomp,
Very good chance this is power supply related. Have a look at the p/s repair thread and/or contact warkus

Half Round

If I recall correctly the wiz is not good at 50Hz / 60Hz field conversion. It tends to choke on 60Hz source played out out 50Hz. I would guess due to amount of storage available and conversion algorithm.

Half Round

Hi Mark, If you search the forums you will find that people have had trouble getting reliable streaming with the S1. It's up to WEP but runs out of steam with TPIK etc. It is also only wireless G. A simple option is use a pair of the Ethernet over power line plug ins. I use a wireless N router that ...

Half Round

Just an observation about battery backup in the NTD. In the setup that iiNet is offering for their NBN service, it appears that battery backup in the NTD is of no real use at all, since for either the network functions or the phone functions of the connection to work, at least both the NTD and mode...

Half Round

Is there somewhere I can find out more about how the NBN Network Termination Device (NTD) connects to the home-side equipment? Not standards docs, but something more than the NBNCo's "just talk to your ISP and they'll fix you up", or my ISP's (iiNet) "just buy stuff from us and it'll...

Half Round

Whilst I do like that one, JB Hifi and I have..."history"...and the Onkyo has a iPod / iPhone input, which I really like the idea of.... Oops!. A snoop around the AVforums or whirlpool might have some info. The mid-year releases should be happening soon, so there might be some more on spe...

Half Round

Plenty of 'run-out' specials available. This must be similar
http://www.jbhifi.com.au/jb-hi-fi-home- ... sku-70522/

Half Round

I haven't seen anyone in this place who has managed to get a BW working with Windows 7 shares without the guest account added to the shares. Have you by chance? . My guest account is turned off. That's why each wiz has a (user) account with a password set up. This way is a little more secure. It do...

Half Round

Thanks Grampus and Half Round. As suggested I got out of the Home Group but still get Can't Select a Folder when I try to open them in my b-wizsharing file. Still trying to find the solution. Running 2 x wiz ,nas, XP box and win7 box on a network here. I have both my wizs' as password protected use...

Half Round

With my Win7 setup., I found that the one thing that made all the difference was to "leave the homegroup" This can be found in the >Control Panel>Network and Internet>HomeGroup I had tried all possibilities that I could find to open up unrestricted access, with no success at all. My thoug...

Half Round

Yeah, that's the one I was focusing on, the others look perfectly flat. Is it possible the larger drive just needs more juice or is more fussy and it's not actually dead? Doesn't seem to register as completely dead, just struggles to operate. How do I identify the type of cap I need? As it's workin...

Half Round

Some more info, probably more background than core. Hard wired network. download rate from Yardwiz screen. P1 transfer rate with TV screen ~2.5MB/S in file player screen ~3.1MB/S P2 transfer rate with TV screen~2.1MB/S in file player screen ~2.6MB/S The transfer rate cyclically varies so it is hard ...

Half Round

Still playing with the XP machine. Tried to turn on debugging but it crashes Yardwiz each time I try. DEBUG __init__._ApplyConfig: Devices="192.168.1.150;192.168.1.155" DEBUG __init__._ApplyConfig: Devices="['192.168.1.150', '192.168.1.155']" DEBUG utilities.__init__: Adding new ...

Half Round

I think that if you use YARDWiz to run getWizPnP than --resume is always used, but Luke can answer that for sure. Correct. Not quite sure how this works in Yardwiz. After a transfer crashes the part downloaded file disappears from the destination folder and the download starts again from the start....

Half Round

Hi Peter, I have been testing with the network set up the way I want it, which includes a client bridged router running dd-wrt. The wiz in question and another (soon) are connected to this router. Throughput is a bit down at about 1.9MB/S indicated by Yardwiz. The network monitor on task manager ind...

Half Round

Hi Peter, My feeling is that a buffer may be getting full and overwriting or truncating data. Otherwise maybe interrupts or time of program execution through different paths may be causing problems. If I had to pick a problem point it would be the wiz with its limited time for processing requests du...

Half Round

Hi Luke and prl, I have tried a large number of combinations of networking from crossover lead between computer and Wiz to networking involving/ not involving wireless plus using 2 different routers. Yardwiz 0.4.2 Computers - One XP SP3 and one Windows 7 32 bit. Storing download on computer hard dri...

Half Round

Hi luke & prl, Update: Had a closer look at the downloading. Found I had a name/password error between the wiz and user accounts which I fixed. Have not seen line 2680 error since. I am now running the yardwiz as a 'normal' program i.e not running with administrator rights. Still having '400 Bad...

Half Round

Still have problems. Not only will it not complete a transfer from the DP2 but now it deletes the transferred ts file as well, i.e., it can no longer be appended as was possible previously. From the log file: Downloading Bargain Hunt - Devon... Error, unable to download M:\HB_output\Bargain Hunt - ...

Half Round

Hi gvm, Using a local splitter with 'F' connectors from the wall socket to split the signal between the wiz and tv can sometimes improve matters. I use this method with http://dicksmith.com.au/product/L4274/tv-lead-3-m-coaxial-cable-with-connectors for the cables. Somebody in the unit next door had ...

Half Round

I 2. If the Beyonwiz is turned on after the TV, the sound that comes through the TV is muffled and unlistenable. I have to turn the TV off and back on again. I've tried a different HDMI cable, I've tried changing the beyonwiz sound settings, all to no avail. The problem was present from the minute ...

Half Round

Pedsy,
I guess you have rebooted the router and switch as well as Wizzes. You could possibly try the Wizzes on the router instead of the switch.

Half Round

cheers Brad,
can but wait and see now

Half Round

I may have missed it, but don't forget to specifically format the hard drive now you have set up system.
The new format method is more rugged for error correcting.
There is a chance that along the way the hard drive may not have been formatted with 350 firmware.

Search found 195 matches

Re: U4 reception issues

Re: Modem antenna

Re: Unofficial feed

Re: U4 high pitch noise during operation?

Re: U4 high pitch noise during operation?

T4 OLED Front Display Replacement

Re: Another T4 tuner problem.

Re: T4 Fan Strange Operation

Re: T4 Fan Strange Operation

Re: T4 Fan Strange Operation

Re: T4 Fan Strange Operation

T4 Fan Strange Operation

Re: T4 for Free

Re: Provider visiting - keeping the FTA EPG current

Re: Provider visiting - keeping the FTA EPG current

Re: Oh dear

Re: V2 crashed while deleting a running recording

V2 crashed while deleting a running recording

Re: Playback - two shows recorded one after the other.

Re: NBN NTD home-side interface

Re: Selecting Files

Re: Issues with DP P2

About the Forum

Search found 195 matches

About the Forum

Join us