However, as the T4 would not responmd to the remote, all I could do was turn off the power

Did all those steps

As a last resort I got some Lexar USB 2.0 S50 from my local Woolies but still no joy.
So the T$ will be on the way to NASA electronics tomorrow.

I looked for " Lexar USB 2.0 S50" from Woolies." but theynow sell the S60 and not S50
Any difference?
I ca't find a source for the S50 model near me in Melbourne.
I can buy on eBay but prefer not to wait a week or more for delivery

It seems my USB3.0 is backwarly compatible.
Looks like I need a service company's assistance

The USB was FAT32 formatted.
I'm not sure about USB1. compatibility so I'll re-try with a much older USB.

Unfortunately that fix did not work. When I inserted the USB with the latest firmware and turned on the power, the usual blue image appeared on the TV. On the T4's own screen it said: "Booting Beyonwiz T4 2015-06-15" (was 2015-06-15 date of manufacture?). There was no advice to press the u...

Recently, my T4 would not turn on from “sleep” mode using the remote. I turned the power off & then on again a few minutes later for it to reboot. It commenced “booting” but froze when the blue circular image appeared on the TV & did not progress beyond there. I have tried several times with...

Thanks, that has fixed it. Cheers,

Also, after I've used FAV, pressed blue & selected Terrestrial TVLCN & clicked OK, when I again press FAV, it opens "Last scanned" & not Terrestrial TVLCN

After I've done a full channel search, all the channels are already entered in my Terrestrial TVLCN folder so I don't understand "zap channels in that bouqute" and in it, the channel 2 is ABC. However, despite following your instructions, when I'm watching TV & change channels, e.g. pr...

I have a new T4 (replacement of my faulty 1st T4) and I have a different channel match problem.
After scanning channels, when I press button 2 on the remote, instead of opening ABC channel 2 it goes to SBS which in the past has always been channel 3.
how can I correct this?

thanks Ian but I have today been advised by a techo at Digital Trading Co that if all other functions are OK that the problem will not be in the power supply but rather in the DVD player itself. I have realized that my 5-year extended warranty has not yet expired and the insurance company will have ...

I tried holding the eject button while turning on the unit but it would not start up. I then tried holding the eject button immediately after hitting the button to turn it on. Still no success. As far as I know the unit has not had the power supply refurbished - unless it was done when the HDD had t...

I haven't played DVDs on my DPS1 for a while.
Today when I want to use it, the tray will not open despite the display showing "Tray Open". This happens both when I try with the remote & also when I use the buttons on the front of the device.
Is there sonmething I can do to correct this?

My Optus cable modem has four ethernet oulets as well as wireless facility which I use for my laptop. My modem is at the opposite end of the house to the DPS1 and has two desktops connected to it. I was wondering how to best connect my new wireless laptop to the DPS1. Perhaps I need to talk to someo...

If I have a program set to record and I am watching the same channel ON DELAY (timeshift)prior to the start of recording, the earlier broadcast is saved and I end up with an unwanted recording with just the channel as its title. So over time I end up with numerous recordings I did not ask the DP S1 ...

What do I need to do to connect my DP S1 to my laptop? I have a wireless Optus cable modem which communicates with my new laptop. Do I need any other hardware, e.g. a router?
I would also like to know exactly what uses I could make of the wireless connection.
Many thanks

Recently my DPS1 has recorded quite a few programs without the record button being touched or a timer set for recording. Anyone else had this problem & what is the solution?
Cheers, John Wells

I think I have an antenna problem as my analogue has now packed up.
Almost certainly not a Beyonwiz problem at all. Seems that initially the digital signal was too weak & later the analogue deteriorated as well. I'll have my antenna checked out.

When the problem occurs all channels fail to work so it seems the problem is not coming from a transmitter. My antenna, installed a year or so ago worked perfectly until this past week. I will try using a splitter at the wall antenna outlet & not use the "RF Loop Out" for my VCR & ...

The TV connected to the "RF Loop Out" was analogue & it operated perfectly. The "No signal Detected" message on the LCD TV appeared for almost all of the one hour recording.

Several times recently my DPS1 has lost picture and sound and a "No signal detected" message appears. My powered antenna goes directly to the DPS1. However at the same time another TV connected to the "RF Loop Out" functions normally, which seems to indicate the signal is actuall...

Does the DPS1 need to be linked to a computer/internet for wizTV to operate?

I have installed the latest firmware but can't find any new channels to view the new content advertised. Is it available in Melbourne yet?

My DP-S1 is connected to my four-year-old Sharp LCD TV via component leads (no HDMI facility on the TV). I am purchasing a combo DVD/VCR recorder so I can copy programs saved on my DP-S1 to DVD (and also use the DVD/VCR recorder to copy VHS recordings to DVD). It is not convenient to use my computer...

thanks, setting to 576i did the trick. Don't know why I didn't get sound previously but it works now

Can someone give me a precise step-by-step guide as to how to copy a movie saved on my DPS1 HDD to a VCR? I tried connecting DPS1 to the AV2 input on my VCR but no sound or image resulted. The VCR only has RCA inputs. Is it possible to copy files this way?

Thanks I've signed up now. I have asked the guys on the phone helpline about emails in the past. They didn't mention the VIP option.
Now I'm happy.

No, I only downloaded 247 today. Why don't they send out bulk emails to let users know when updates are available???.
I've only had this error once. Hopefully it won't return once 247 is installed

Last night I had my DPS1 programmed to record a movie. I am uncertain as to whether or not my wife had earlier turned off the DPS1. At the time I was watching a video being played on a separate video player. During the evening I noticed the DPS1 error 0022 message showing for the first time. I conne...

When installing the latest firmware upgrade for my DPS1 I got the message that proceeding would "terminate recordings".
1 Does this just mean it will stop anything that is currently recording? or
2 will it delete saved programs on the HDD? I hope not but just want to be 100% certain

Can we please have release notes in plain English. Some entries are understandable but many are rather cryptic and too brief to explain their meaning, e.g. "The track bar displaying bug after chase play fixed" What on earth does that mean? A few extra words or perhaps another sentence adde...