Sandy B wrote: ↑

Mon Jan 14, 2019 10:59

If my memory is correct you can use the "channel numbers" on the remote control to get numbers when renaming on the DP-P2.

Perfect!

Hi I have recorded a series with my DP2P and then moved the TVWIZ files to an external HDD. I want to prefix the names with the series and episode number "S1E1 Blindspot" etc. I can't use the rename feature on the DP2P because it doesn't include numbers in its file rename feature. When I r...

Yes I do get emails for the failed timers.
I have set the region to VIC-Melbourne and I live in the bayside suburbs of Melbourne (VIC 3192)

I have two Beyonwiz DP-P2s When I go to the guide neither of them fill in the TV guide for channel 70. That doesn't worry me too much though it would be nice to fix it. I can watch channel 70. But I get a lot of failures to set recorders for programs on network 7. I haven't worked out exactly when i...

I have messed with some of my router settings and now WIZ PNP does not seem to work properly. Could be coincidental. My Hardware is: Netgear DGND3700 router/modem/wireless access point connected to ADSL line, one DP-2P and a 2TB HDD. LAN connection from DGND3700 to LAN port of a second DGND3700 whic...

There is nothing whatsoever in that post about an HDD failure. After all it is the HDD failure and loss of all of my recordings that really worries me.

A few minutes ago I noticed "service Updated" flash on my screen. No big deal. It could be coincidence but now when I load the file player I get "HDD not initialised ...". Could these two things be related? I had to re-format the HDD a few months ago after getting the same HDD me...

have installed the VLC android beta on my tablet and it happily plays some AVI files that I have. Unfortunately, it does not seem to matter what I do I can't get it to play the MP4 H264 files that I have recorded (from the AV Input) of the WIZ. I have tried converting them to mpg, avi, wmv but nothi...

I would like to keep my video files in one format for use on a Galaxy Tab and my Wiz. Galaxy Tab seems to prefer MP4 format. But this format seems to be very slow to read on the WIZ (start or skip) . The one AVI file I have tried on the (new) Galaxy Tab 3 seems to work fine, but I use VideoRedo and ...

In the time it took me to write that last post it went to standby again. Even though I have not touched the WIZ or the remote in the last 8 hours.

On pushing the front panel power button it then powered up normally.

Last night after turning my system off I turned the screen back on and confirmed that the WIZ really was on standby. i.e. it was not producing Audio Visual. This morning I again turned on the screen without touching the WIZ to find that while it still appears to be on Standby it is now producing AV ...

Thanks Mark I purchased Feb 2011 from ICE TV. 2TB unit. Power supply is IP-100 Rev 4 I use a universal remote control. So each night I turn off my system, which includes a power toggle command to the WIZ. If it is recording at the time then it waits until recording is finished and then turns to stan...

When I turn off my system, all of my devices including the WIZ appear to turn off. Sometimes when I turn my system on again using a remote control the WIZ front panel continues to show the time and the blue ring of fire stays off. But the WIZ is clearly on because there is video and audio sent to my...

Some devices have more available codes than are used on the remote control.

Does the DP-2P have separate power on and power off codes?

I am using a harmony 600 remote.

LoungeWiz: DHCP: Disable IP Address 192.168.000.003 Subnet Mask: 255.255.255.000 Gateway: 192.168.000.001 Primary DNS Server IP: 192.168.000.001 Secondary DNS Server IP: 000.000.000.000 MAC Address: 00:19:1E:00:DB:5A Client: Enable Server: Enable Name: Lounge Wiz Port: 49152 FamilyWiz: DHCP: Disable...

I have a new switch.

The two Wiz are connected together via the switch.

Unfortunately everything functions exactly as before.

OK it looks like I need to go and buy a simple switch and try that.

Can someone give me details of switch(es) that are known to work? Anyone using this one? Netgear GS605 5 Port Gigabit Switch


Thanks in advance


Dave.

Has ANYONE successfully networked two DP-2Ps such that you can play in either direction?

Thankyou, both for your suggestions. Remember that I get exactly the same results using an ethernet crossover cable. To me this points firmly towards a Wiz. When I put my network back together both units are visible in WizFX which convinces me that both units servers are operating. So most likely th...

I don't know what a subnet mask is! But both P2's are set to:

255.255.255.000

and the IP Addresses are correct / unique.

I have just placed the two Wiz side by side and connected them together using a brand new 1m long ethernet crossover cable. i.e. the router is completely gone. I then tried all four possible permutations of firmware DPP2-01.07.350 and http://dl.dropbox.com/u/5403626/Beyonwiz/DPP2_01.07.069_wizpnp.wr...

My router has the following settings: Use Router as DHCP Server CHECKED Starting IP Address 192.168.0.10 Address reservation - one line for each wiz with a reference to the MAC address. Looking through historic posts this seems like a common problem. As far as I can tell the problem is not resolved ...

There seem to be several people that have posted the problem that I have, but can it be solved? I have just purchased a second Wiz. LoungeWiz cannot see FamilyWiz but FamilyWiz can see LoungeWiz how do I fix this? I have two DP-2P 2TB boxes called LoungeWiz and FamilyWiz they have near identical set...

I am planning to buy a second DP-2P. They will both be connected (wired) to a Netgear DGND3700 router/ADSL Modem which also has a 2TB HDD connected to it. Just wondering will there be any unpleasant surprises when I want to play recorded content on one DP-2P from the other? Will the fast forward, pa...

This is really strange. When I connect the USB HDD directly to my PC, both windows explorer and VideoRedo agree that the duration is about 2 hours. When I connect the HDD to my router and access it wirelessly from my PC windows explorer correctly reports the duration as 2 hours. When I open the file...

I store my MPG files on an NTFS formatted 2TB HDD connected to a Netgear DGND3700 router/modem. My Wiz is connected to the router by wired ethernet and plays files that are smaller than 4GB nicely. It plays larger files OK too. But, if I look at the file info the Wiz reports the file duration a bit ...

System ID 0908 0000 0A22 9E3C
Firmware DPP2-01.07.350
Loader 1.1.3.1.76

I am now getting a popup to say that it is re-indexing. I was not pressing OK to enter the recordings pane.

However, WizPlayer is still only listing the first 63 entries.

I am keen to use WizPlayer.

Is this one of those times when I need to re-index the files?

When I bring up the file play menu and press the lowest/right button nothing seems to happen. When should I observe when I re-index the files?

I am trying to use WizPlayer. When I push "Beyonwiz Search" it finds the first 63 files on my wiz and then gives the error: Socket error 11004 Which I found using goggle to mean "Valid name, no data record of requested type". Unfortunately the first 63 items on my wiz are all &qu...

Thanks! I have downloaded the trial version of VideoRedoPlus and am very impressed. Now I need to choose between: VideoRedoPlus TVSuite TVSuiteH.264 I would like to be able to write to DVD so I guess that means TVSuite or TVSuite.264. TV Suite.264 has the feature "Video cropping and resizing&qu...

Thanks, Given that I transfer to my PC, edit and then transfer back; am I correct that I will end up with the TS format and that the files will be found under "contents" rather than under "recordings"? Also do you have a suggestion which of the two programs that you mentioned, I ...

How accurately can I expect to delete adds?

I have seen a post somewhere that discussed this but everyone seemed to have a different view (and I can't find it anyway).

i.e. how many seconds of adds (at each end) do I need to leave in to be sue that I won't delete any frames of the actual program?

There is some very detailed information here on this forum, but I can't see the answer to this simple question! I have a Beyonwiz DPP2 with wired Ethernet connection to my Netgear ADSL modem//wireless router/ firewall. I use a wireless laptop. I can: 1. push recordings from the DPP2 to my laptop in ...