Beyonwiz Australia

grjnmiller

Did you reinstall your firmware from USB? The IceTV plugin is no longer part of the USB firmware distribution. It was removed when IceTV went into administration and hasn't been put back in. I'm not sure why. Just reinstall it. PLUGIN from live TV, then GREEN Download plugins. Navigate to "sys...

grjnmiller

Hi all

My icetv plugin is gone. how do i get it back.

thanks

grjnmiller

Get a better ISP? :?: The entire feed is only about 1.5GB, so in the worst case scenario it should take about half an hour to download at normal speeds and about 4 hours at snail speed. If it does not finish in 5 hours, consider downloading the USB update instead, then do an incremental online upda...

grjnmiller

I am in the process of using the online update and i am still waiting nearly 3hr later. its just over 1/2 way through. What do i do now. let it keep going and hope that when i wake up in the morning it will be done.

thanks

Graeme

grjnmiller

prl wrote:
grjnmiller wrote:... Sorry for this question but if i update my firmware will I lose everything that has been recorded on my T3 ...
No.

thanks Peter
for some reason i keep thinking ii will lose everything. I dont no why

grjnmiller

HI all

Sorry for this question but if i update my firmware will I lose everything that has been recorded on my T3

thanks

grjnmiller

NedIS wrote:Hi kim1961, if you have an android phone or tablet you can install VU+ app which has a built in remote for the T3!

what about if you have a iphione.

grjnmiller

Back at the start of this post you recommended fstab :wink: but that was 6 months ago. I thought I'd read on another post about synology NAS that they had used fstab too. I certainly found fstab worked better for my WD booklive, although I can't remember what the issue with autofs was. I also ended...

grjnmiller

Yes configuring the router to always give the same ip is the right way to go. That isn't quite the same as a static ip adddres but is better as it will automatically compensate if you make other changes. I don't have a synology NAS do most of my help was generic but their website help is good and I...

grjnmiller

i could be wrong but it looks like grjnmiller has his NAS and the T3 setup to dynamic ip's so if those devices are turned off or disconnected from the router they may be allocated a new ip when turned on again i find it much easier to have static ip addresses for my NAS and T3 makes life a lot simp...

grjnmiller

I would like to thank each and everyone of you that helped me out with this. I have learnt a great deal of networking over the past couple of days

grjnmiller

Rule #1: If a user has issues configuring networking on a device, you must never assume that any of their other devices are configured correctly. In fact, if the user has trouble grasping basic networking concepts, you should assume that every piece of equipment is somehow misconfigured. No reflect...

grjnmiller

Here is how I got mine to set up Mount using - FSTAB Active - ON Local Share Name - whatever you like Mount Type - CIFS share so i can add username and password Server IP - is my NAS Server Share - The folder which i wanted to use use as HDD replacement - off Mount option - left as is username - wha...

grjnmiller

Mate, this is like drawing blood from a stone. I can't guess how you've got your network configured. I'm not sure if you can recall how your S1 was configured to access the NAS but the settings should be the same on the T3. You need to know the name of your share on your NAS where your media files ...

grjnmiller

simoncasey wrote:OK, but how do you currently play your media from the NAS

I used to through our old DP-S1 but its dead so i had to buy a T3

aslo through the App on our ipads called DS video

grjnmiller

Some more info about what you actually do and what you have configured would be helpful. By icon, I assume you mean you have an icon for your synology NAS, and when you click on it it shows an available shared driver. Or do you have a network drive mapped to a drive letter, etc, All i do is click o...

grjnmiller

simoncasey wrote:How do you access your NAS from your PC?

by clicking on the icon in the network section

grjnmiller

Yes, depending on the router that is a possible IP address. But if you go to the T3 network browser it will show the IP address of your NAS. ok cool i have the right one then I have the below setup mount using - AUTOFS Active - On Local sharename - Diskstation ( i named it that) Server IP - 10.0.0....

grjnmiller

You need the IP address of you NAS and the name of the share on your NAS that you want to access. I read grjnmiller as saying that he used the IP address that was pre-filled for the server by MENU>Settings>Network>Network Browser. But perhaps I'm wrong. It's probably worthwhile checking the IP addr...

grjnmiller

You need the IP address of you NAS and the name of the share on your NAS that you want to access. I read grjnmiller as saying that he used the IP address that was pre-filled for the server by MENU>Settings>Network>Network Browser. But perhaps I'm wrong. It's probably worthwhile checking the IP addr...

grjnmiller

Can someone point me to a step-by-step guide to connecting a T3 to a NAS? After hours (no make that days) of trial & error I found the following actually worked: ftp://emailau:b00fhead@users.tpg.com.au/Miscellaneous/NAS.PNG I think that any NAS settings are basically the same as a Windows share...

grjnmiller

simoncasey wrote:It should appear as a source in the menu and as one of the locations when you press the yellow button in media list

yes it does appear but i get an error message directory/media/autofs/diskstation/ does not exsit

grjnmiller

simoncasey wrote:IP address is the IP address of your server. Share name is the name of the share on the server that you want to access.

how do i know if i have the et up right

grjnmiller

Yes, I don't have a synology NAS so I'm not sure if there are specific settings Normal settings off the top of my head are Either autofs or fstab CIFS (or NFS) IP address Name of share on server Leave mount options as is Enter a username and/or password on second page Windows 8 can be set up the sa...

grjnmiller

[quote="simoncasey"]It often doesn't. You will need to add the mount manually.

ok cool. Clicked on mount manager and it take me to 5 options. I guess i click on add new network mount point

grjnmiller

Select the synology and expand to see if your shares come up. Then follow as per the previous post. sorry guys that didn't work. Did bring up the blue circle that looks like to searching I also tried my laptop the has windows 8 and it did search but nothing happened what do i do now thanks again

grjnmiller

So, I'm assuming then that the T3 is already on the wifi network. The easiest way to connect to a network device is to go to Setup>Network>Network Browser and scan the network. Select your synology NAS and then it will either show the available shares or it will wait for a long time and not show th...

grjnmiller

simoncasey wrote:are you asking how to get your T3 on your wifi network or at new you asking how to access your synology NAS from your T3?

I want to know to do connect the T3 to my synology NAS so i can watch movies etc via Wifi

grjnmiller

peteru wrote:Ethernet cables and an Ethernet switch. Cat5e cables will be sufficient, but you may want to purchase a GigE switch, rather than just 10/100 Ethernet. The T3 will work just fine with GigE equipment.

Sorry guys I of should of stated by WiFi

grjnmiller

Hi all

How do i connect my synology to the T3 please.

thanks

grjnmiller

Awesome :) Have fun! The T3 really comes into its own once it is networked. done the ICE TV as Well so next thing to work out is how to setup my Synology NAS to it also i have found the the instructions that come in the box aren't the best. I have downloaded the manual from the Web which seems to b...

grjnmiller

WEP = insecure WPA = sometimes secure, depends on quality of implementation WPA2 = mostly secure, but also depends on quality of implementation Your network has to have exactly one working DHCP server. This is usually your modem/router. You must not have more than one DHCP server, for example, if y...

grjnmiller

WEP = insecure WPA = sometimes secure, depends on quality of implementation WPA2 = mostly secure, but also depends on quality of implementation Your network has to have exactly one working DHCP server. This is usually your modem/router. You must not have more than one DHCP server, for example, if y...

grjnmiller

Did you get the ssid right? Encryption settings? What are the settings in your modem? It sounds unlikely to be a dhcp/IP type issue, but rather something on the wireless side. what the difference between WEP and WPA as I have changed my modem from WEP to WPA. Once i did this i did a Network test an...

grjnmiller

Hi all I just got my T3 yesterday after using a DP-S1 for so long. Anyway how do i know what version of firmware i am currently running thanks In the menu go to Setup > Information > About The version is basically the last upgrade date which is currently 2014-12-02 If the date you have is before th...

grjnmiller

Hi all I am not a genius at this or using the beyonwiz but i did have a DP-S1 before upgrading to the T3 yesterday. I have tried the Auto Config DHCP but it didn't work. Anyway below is my setup I had on the old S1 and i have tried to do the same thing with the T3 but it wont work. Any ideas. W-Lan ...

grjnmiller

Hi all

I just got my T3 yesterday after using a DP-S1 for so long. Anyway how do i know what version of firmware i am currently running

thanks

grjnmiller

It's worth a try with one of your difficult mp4's MkvMergeGui will only take about 3 or 4 minutes to do a full length movie ( depends on how fast your PC is of course ). More important whenever you have a problem with any video or audio file always post a Mediainfo log ( text mode) as the informati...

grjnmiller

netmask wrote:Post a mediainfo log of a troublesome file. I generally put my mp4 files in a mkv container using MkvMergeGui for more reliable navigation. No re encoding involved.

So can convert my Mp4's to MKV using this program and then it will work ok

grjnmiller

Just wondering IceTv is working on the T3 yet.

grjnmiller

peteru wrote:It depends on what is in the MP4 file. In general, yes, they play, but it really depends on the codec and settings used for the content.

thanks for that

most are set at mpeg4. Should they be AVC /H.264

grjnmiller

HI all

Does the T3 play mp4's. I have an S1 and it always plays up when playing MP4's

thanks

grjnmiller

Paul55 wrote:.ts is the right format for transfer, .tvwiz files is the Beyonwiz breaking up the recording into small parts to make navigation quicker and more accurate.

well then i am transferring correct. So why wont it read the file in videoRoDo then. are thee other programs that do the same thing

grjnmiller

netmask wrote:Did you transfer the file as .tvwiz format or .TS ? If you chose .tvwiz format convert it to TS. Just point winfx to the file and convert to TS. Videoredo or Womble etc should play a TS file without too much bother.

I transferred the file as a .TS
Should i be using .tvwiz

grjnmiller

OK i have winfx on the laptop. I have transferred a file from my beyonwiz. Now i want to remove the advertisements and format the tv show into a MP4 so i can watch it later on my ipad or laptop.

I have videorodo and for some reason it wont read the file.

Can anyone help me please.

grjnmiller

Hi Guys

Can anyone help me set up my DPS1 windows. I have not sure on what to do.

thanks

Graeme

grjnmiller

I have just bought a new laptop and it came with windows 8. I have tried to search for the laptop with my DP-S1 and it cant find it. Any ideas.

grjnmiller

this is probably my last on this. Except, hardwire, hardwire, hardwire. If you must persist with wireless, AND DHCP off, logically you seem not to have made a statement that makes me think that you understand the basics of IP addressing. Not having a go at. you., it's just a matter of fact. You hav...

grjnmiller

I can't be of much help, since my knowledge of wireless is almost 0, but have you confirmed that the wireless antennae are attached to the S1? Also, have you tried temporarily moving the S1 as close as possible to the wireless router just to see if it connects there? Like most, I guess, I've been l...

Search found 86 matches

About the Forum

Join us