Search found 110 matches
- Fri Oct 18, 2019 11:12
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: The dreaded ERROR 0000 message
- Replies: 10
- Views: 2458
Re: The dreaded ERROR 0000 message
all good thanks people - Mark has been in contact
- Tue Oct 15, 2019 17:44
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: The dreaded ERROR 0000 message
- Replies: 10
- Views: 2458
Re: The dreaded ERROR 0000 message
According to the information that Mark supplies, they use different power supplies. On Mark’s Beyonwiz PVR repair guides page on his Decisive Computer Solutions website, the DP-P2 uses an IP-100 power supply & the FV-L1 & DP-P1 uses an IP-108 power supply. Thanks, I did see that before but ...
- Mon Oct 14, 2019 22:40
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: The dreaded ERROR 0000 message
- Replies: 10
- Views: 2458
Re: The dreaded ERROR 0000 message
Haven't as yet had a reply to my email. Thinking of taking out the power supply from my FL-V1 (firmware modded so it runs as a P1 as per my signature below) that's hardly ever gets used and putting it into the dead P2. Does anyone know if they are actually interchangeable? If they are, I'll just swa...
- Sun Oct 13, 2019 21:17
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: The dreaded ERROR 0000 message
- Replies: 10
- Views: 2458
Re: The dreaded ERROR 0000 message
... Any help very much appreciated, cheers If you switch the unit off at the power point for a while then remove the cover you may be able to see if any electrolytic capacitors in the power supply are swollen at the top (the electrolytic caps should be flat on the top, but that doesn’t mean they ha...
- Sun Oct 13, 2019 15:43
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: The dreaded ERROR 0000 message
- Replies: 10
- Views: 2458
Re: The dreaded ERROR 0000 message
I had forgotten the name of his business. I'll contact him and see how it works out.
Many thanks for your help gentleman, cheers
Many thanks for your help gentleman, cheers
- Sun Oct 13, 2019 14:15
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: The dreaded ERROR 0000 message
- Replies: 10
- Views: 2458
The dreaded ERROR 0000 message
The other halfs P2 decided to present this when it was turned on. Appears it's probably related to a failed power supply section component? What actually happens when your turn it on is the display shows "loading" for a slightly longer period of time than normal and then it shows the error...
- Sat Sep 03, 2016 19:12
- Forum: Ice TV
- Topic: Frequency of Icetv EPG updates from their server?
- Replies: 0
- Views: 2218
Frequency of Icetv EPG updates from their server?
Wondering what time frequency Icetv EPG updates happen from the Icetv server? Is it every 15mins?
- Mon Apr 21, 2014 11:21
- Forum: Pre-release Discussion
- Topic: T3 Support for Music?
- Replies: 5
- Views: 3471
Re: T3 Support for Music?
given the reference to apple decices above, can the T3 handle the apple lossless format?
- Mon Apr 07, 2014 16:15
- Forum: Pre-release Discussion
- Topic: IceTV????
- Replies: 173
- Views: 40014
Re: IceTV????
I think you should base any purchase decisions based on capabilities at the time of purchase, not on something where the parties involved in the possible future features "can't give you a timeframe". decided to cancel the order this morning there's a few things that are must haves for me ...
- Mon Apr 07, 2014 06:33
- Forum: Pre-release Discussion
- Topic: IceTV????
- Replies: 173
- Views: 40014
Re: IceTV????
nothing recently relevant though, and still no word on official supportGully wrote:I cannot understand this post when there are 3 pages of this topic all about IceTV.dddp wrote:Can't understand why no one else has posted about Icetv support on the T3
- Sun Apr 06, 2014 22:25
- Forum: Pre-release Discussion
- Topic: IceTV????
- Replies: 173
- Views: 40014
Re: IceTV????
Can't understand why no one else has posted about Icetv support on the T3
seriously considering cancelling my order as the ability to use Icetv is a primary requirement for me and it seem Icetv isn't happening on the T3 officially at least
seriously considering cancelling my order as the ability to use Icetv is a primary requirement for me and it seem Icetv isn't happening on the T3 officially at least
- Wed Apr 02, 2014 11:32
- Forum: Pre-release Discussion
- Topic: T3 able to play P2 files?
- Replies: 5
- Views: 2806
Re: T3 able to play P2 files?
Why not run getWizPnP on the T3? The files could be converted as they are being copied from the P2 drive to the T3. Perl is available, what else would be needed? (Besides a UI). sounds like the go to me - much better than transferring from P2 to Pc and then to T3 i'd imagine there'd be a viable mar...
- Tue Apr 01, 2014 13:27
- Forum: Pre-release Discussion
- Topic: T3 able to play P2 files?
- Replies: 5
- Views: 2806
T3 able to play P2 files?
be nice if it can - i'd like to connect my P2 drive to the T3 and copy across a bunch of files i'd like to have on the T3 internal HDD i was thinking of pulling my P2 drive out of my P2 and putting it in an external usb box and plugging it into the T3. Then after the copying process is complete, put...
- Thu Mar 20, 2014 23:12
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: DP-P1 - locked recording - want to delete it but no PW :(
- Replies: 1
- Views: 521
DP-P1 - locked recording - want to delete it but no PW :(
I have a locked file on my P1 (actually a dealspace modded FV_L1 running P1 firmware) that i want to delete but as i don't know the lock code I can't or don't know how to delete this file i don't know who the smartar$e was who locked it, but i want it gone - is it possible to delete this file somehow?
- Sat Nov 10, 2012 18:24
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
thank you gents, how does one telnet into the unit? Can you point me in the right direction please? You first need to enable the telnet server on the Beyonwiz by installing hacked firmware. Then you can use any telnet client (there's a telnet command-line client in Windows) to connect. Once connect...
- Sat Nov 10, 2012 09:35
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
Hi, The reason for the display brightness being higher on your new unit v's old unit is that P2 displays deteriorate over time and the backlight reduces as they age. I have seen this in most P2 units and P1 units. The display seems to get burn or heat marks on it if you look at the front of it and ...
- Sat Nov 10, 2012 00:11
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
- Fri Nov 09, 2012 21:02
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
- Fri Nov 09, 2012 20:51
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
- Fri Nov 09, 2012 20:36
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
- Fri Nov 09, 2012 19:16
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
- Fri Nov 09, 2012 18:56
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
- Fri Nov 09, 2012 18:28
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Dealspace FV-L1/DP-P1 unit not responding to remote
- Replies: 22
- Views: 4539
Dealspace FV-L1/DP-P1 unit not responding to remote
Bought one of these and it arrived today, Unpacked it and everything looks fine. The remote looks new. The problem is the unit doesn't respond at all to any commands of the remote. I've set the remote to control my telly and it works fine at that. But the unit doesn't respond at all. I also have a D...
- Fri Jul 20, 2012 23:57
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: HDD checks messages - but is HDD ok?
- Replies: 5
- Views: 1457
- Fri Jul 20, 2012 21:01
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: HDD checks messages - but is HDD ok?
- Replies: 5
- Views: 1457
- Fri Jul 20, 2012 07:05
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: HDD checks messages - but is HDD ok?
- Replies: 5
- Views: 1457
thanks for the reply Ian can't find the receipt at the moment, but the 320gb models had just gone superseded when i bought it. My first posts here go back to feb 2009 so i'd guess it would be around that date yes i know it could be the hdd, but the hdd is working fine and not making any odd sounds. ...
- Thu Jul 19, 2012 23:21
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: HDD Upgrade Experiences
- Replies: 55
- Views: 20778
Re: Upgrade to SSD
Going back to the original post, has anyone installed a SSHD into their PVR? I know they are expensive but I too have had problems with annoying hums from all my PVR's. you can isolate th HDD with rubber grommets/washers - they make the HDD all but silent when it's operating. A whole lot simpler an...
- Thu Jul 19, 2012 23:08
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: HDD checks messages - but is HDD ok?
- Replies: 5
- Views: 1457
HDD checks messages - but is HDD ok?
Well, this is what's happening, as of tonight every time i boot my P2 up i get the check HDD warning. The HDD gets checked and everything's fine. I guess the problem is that unless i leave the P2 on all the time it won't fire up to record my timers and so these will fail - i'll be leaving it ON unti...
- Sun Jul 01, 2012 18:36
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: 2 x P2s - can you lock in the remote to 1 unit only?
- Replies: 7
- Views: 1809
Alternatively, you could get a 500GB DP-Lite. Different codeset from the P2, and less expensive, too. $299 new from Dealspace, vs $499 for a new 1TB P2 from the same source or $399 for a reconditioned 500GB P2. i think this is probably the best option really - i see dealspace has the i model recon ...
- Sun Jul 01, 2012 15:21
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: 2 x P2s - can you lock in the remote to 1 unit only?
- Replies: 7
- Views: 1809
2 x P2s - can you lock in the remote to 1 unit only?
Thinking of getting another P2 which will live in the same cabinet as my old 320gb P2 (HDD upgraded to 500gb) and was wondering if it's possible to set the remote to separate units so operating one P2 won't operate the other P2 - is this possible? i'm one of those people who prefer to use the origin...
- Wed Feb 09, 2011 09:41
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Firmware 01.0x.350 Bug & Wish List
- Replies: 117
- Views: 55062
- Tue Feb 08, 2011 23:59
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: Firmware 01.0x.350 Bug & Wish List
- Replies: 117
- Views: 55062
- Sun Nov 21, 2010 16:26
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
as other's have already said - it's a sad state of affairs when the people responsible for providing owners with support won't publicly provide firmware that fixes a problem that a firmware that they publicly provide creates my time on hold of a few minutes short of an hour to get the 346 version is...
- Fri Nov 12, 2010 23:06
- Forum: Content, Software and USB
- Topic: WizZilla now working for me - only newer files though
- Replies: 2
- Views: 1295
thanks Ian, that's got most of the files working - seems the ones that don't are the edited ones, name is different to original name, full episodes are no problem as i tend to save a lot of music files i'll have to remember to export the original, or a copy of it, rather than an edited section/versi...
- Fri Nov 12, 2010 18:52
- Forum: Content, Software and USB
- Topic: WizZilla now working for me - only newer files though
- Replies: 2
- Views: 1295
WizZilla now working for me - only newer files though
had a problem with WZ not working and the log telling me that settings.exe was missing - no matter what i tried i couldn't get it to work (unistalled, reinstalled). By work i mean to actually download a file from my P2 - it would connect and all the info showed just fine but no file transfers happen...
- Tue Nov 09, 2010 07:40
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: most stable firmware?
- Replies: 17
- Views: 5904
i'm going back to 320 - tried 334 had problems with network transfers, rang DPG on hold for almost an hour and got 336. 336 hasn't fixed network transfers for me so back to 320 i go wish there was a way to save timers so they could be reloaded when changing firmware versions - it isn't a simple proc...
- Wed Nov 03, 2010 21:15
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
okies - sorry if i got anyone in trouble, specially you glow sometimes i really wonder if it's worth it all - you think, oh this looks nice think i'll try that ... hours and hours later you find you've actually gone backwards seeing as most of my posts here in this thread could be considered off top...
- Wed Nov 03, 2010 20:20
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
- Wed Nov 03, 2010 19:36
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
looks like it's time to revert to .320 (i keep previous versions in case the source disappears) - what a PITA after having to reload all the timers etc. If you give DPG a call, explain that you are having trouble with copying files off using WizFX/WizZilla and ask nicely, they might give you a late...
- Wed Nov 03, 2010 15:38
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
all is revealed - yes it's 01.05.334 alrighty - as usual everyone's on the money except me :? looks like it's time to revert to .320 (i keep previous versions in case the source disappears) - what a PITA after having to reload all the timers etc. I've been lucky in the past i haven't come across iss...
- Wed Nov 03, 2010 07:42
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
I'm way, way late to the WizZilla party, having come across a reference to it in another post and Googled it out of curiosity, only to realise I'd tried it way back when, in one of its earliest incarnation! I have to say, BRILLIANT job guys. Really impressive. The list of recordings with episode na...
- Sun Oct 31, 2010 12:14
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
i was reading this page http://www.beyonwiz.com.au/phpbb2/viewtopic.php?p=45862 it doesn't say there that options aren't selectable - thought that would be the place to find what's what. i only tried this because some users reported wizfx wasn't working for them under the lastest firmware update, th...
- Sun Oct 31, 2010 08:00
- Forum: Content, Software and USB
- Topic: WizZilla has arrived
- Replies: 748
- Views: 211850
1st time WizZilla 1.1.0.60 user here - nice looking UI, much better than WizFX. It gives me all the info about what recordings i have on my wiz, episode info etc. There's just one problem tho, I can't use it to transfer files from my wiz. I select a file to download, hit the download button or choos...
- Wed Oct 27, 2010 18:12
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: P2 - network time setting server name?
- Replies: 12
- Views: 3577
Ok, working fine in static IP now 2 settings were wrong, DNS and the Gateway (why i didn't notice this before i don't know lol) in the static settings. I made them both the same, as they are if DHCP is enabled, and hey presto it works! no more error messages and the P2 is showing the correct time! m...
- Wed Oct 27, 2010 18:03
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: P2 - network time setting server name?
- Replies: 12
- Views: 3577
- Wed Oct 27, 2010 16:56
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: P2 - network time setting server name?
- Replies: 12
- Views: 3577
still getting error messages - they are error: name or service not known todays date and time ntpdate[99]: can't find host au.pool.ntp.org todays date and time ntpdate[99]: no servers can be used, exiting edit, updated to the 1.05.334 'by the book', rescan etc prior to this - may have been getting t...
- Wed Oct 27, 2010 16:51
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: P2 - network time setting server name?
- Replies: 12
- Views: 3577
thanks for the answers and the server name my P2 is connected to a 4 port wireless router http://www.repotec.com/products/WirelessLAN/802_11n/RP_WR5422/RP_WR5422_1.asp (it also connects my wdtv and lg bluray player to the network) which in turn connects wirelessly to my billion 7403vgp. It all works...
- Wed Oct 27, 2010 15:14
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: P2 - network time setting server name?
- Replies: 12
- Views: 3577
P2 - network time setting server name?
I noticed that i was getting error messages in the network time setting section, the message was something like the server couldn't be found and so it was exiting. So i thought i'd just bung in another time server, time.windows.com or 207.46.130.100 but i also get an error message here too. The mess...
- Sun Sep 19, 2010 21:56
- Forum: DP-P2, FV-L1, DP-Lite, DP-S1 and DP-P1
- Topic: P2 - upon power on get HDD check - all recodings lost?
- Replies: 45
- Views: 10574
Even if no help is forthcoming, perhaps there may be some useful information in my saga for others. chances of others experiencing the same problems you are and finding your posts in a thread named that doesn't reflect your experience is very remote - if you were genuine in your desire to help othe...