Beyonwiz Australia

Bluebird

Thanks prl, works a treat.
I'll try and remember about the screenshot fir next time.

Bluebird

In the last few days something has occurred, on my U4, that has resulted in the EPG only show 1 hour's worth of programs instead of 3 hours or so. I have looked around and cannot see which/what setting may have been altered. Can you point me in the right direction. I applogise for the poor quality o...

Bluebird

Thank you.
Default is "enabled", but "disabled" is what I had before.

I had changed it many moons ago and couldn't remember the setting.

Thanks again.

Bluebird

Hi, Before upgrading to v19.3, I used a feature of epg. In epg mode, I was able to navigate the epg, press "ok" to check info and preview, and remain on that channel when pressing "exit" to go back to live TV, as opposed to pressing "ok" again. The setting is probably t...

Bluebird

Thanks all who helped.
Merlin music player worked as expected.
To complete the story, I installed the 19.3 packages with the 17.5 music player. All good.

Bluebird

Thanks.
Merlin fired up and played.
Later today I will check that it plays an entire album.

Bluebird

Hi,
I was using the Merlin Music player, but then upgraded to V 19.3 on my U4. I don't seem to be able to find the plugin anymore.
Is it available for this firmware? Or is there an alternative?
The main feature I am looking for is to automatically play each track in turn.

Bluebird

Hi Gurus. I am looking to replace my current T2 with a U4. I want to use the hard disk currently in the T2 in the U4. I also want to retain the recordings on the hard disk currently in the T2. I think I have asked if it is possible. Now I am in a position to do it. Are there any tricks and/or traps?...

Bluebird

As the U4 uses a 2.5" harddrive, what considerations would be necessary to install a drive from a T2 into a U4?
The idea is to retain settings, timers, network settings, records etc.

Marty

Bluebird

Hi AvB,
Reading your post, are you aware there is a second USB port in the front behind the flap?
Marty.

Bluebird

Hi, I have noticed the same thing, but am convinced it is daylight savings related. There historically has been a changeover period where times seem to be fluid and often I have lost recordings. (DP units) I was interested to see how the T2`s handled it. Double recordings. One at each time frame. Is...

Bluebird

Hi, I am not entirely happy with "epgrefresh" and wonder if it is due to my method of operation. I have T2`s that I never shutdown or put to sleep unless there is a software issue. This is the way my DP units work. From what I have been reading "epgrefresh" works from "sleep...

Bluebird

I recorded "The Blacklist" on Sunday night, and had severe pixilation.
By any chance are we all in Melbourne?
Is it a Melbourne thing?

Bluebird

I now have 2 T2's and want the change their names to uniquely identify them.
I had a look around and didn't find where is can be done.
Can you guide me?

Bluebird

I noticed a similar thing after upgrading to the recent software update. Everything was normal after upgrade, but when I reinstalled Hdoverlayskin, after the gui restart, the file structure was created on the usb stick that the skin was loaded from.ie movie folder , epg.dat etc. I removed the usb st...

Bluebird

Is it possible to add a keyboard function to the app to complement the wireless keyboards?

Bluebird

Hi,
What do you get under "Sources" when you press menu from live TV?

Bluebird

Swanny,
Maybe you should think about assigning permanent ip addresses to the mac numbers of your various devices.
Then if your router restarts, everything is where it was before.

Bluebird

Hi Swanny, the questions asked by rockets will provide an idea of what is happening on your network. Can you please provide the ip address for your router, imac,ipad,fetch and T4 as seen by your T4. I assume it is your ipad that is having issues, this is a bit unclear in your inital post. Which netw...

Bluebird

How are you connecting your wireless devices to your wifi?. I know I have issues when using my android and forgetting to switch off mobile data. Other questions I would ask are: How far are you from your wifi router? Which band are you using? 5gig or 2.4gig. Have you retried the ios app with auto se...

Bluebird

Hi Swanny,
I don't have the ios app, but I assume you want the ip address of your wiz.
On my T2 I find it:
menu,setup,information,network.
Looks something like 192.168.1.100.

Bluebird

When the update became available I performed an on-line update. As I had not removed the wireless keyboard dongle from the USB port the reboot failed. Powered off switch and powered on again without dongle and it started up. So far normal. Went to menu and tried on-line update and T2 said there was ...

Bluebird

Hi,
I have a T2 into which I installed a WD 2T green drive, and to be honest I can't heard it.
The beloved P1 is located nearby and I can hear it.
Maybe it's the difference between a laptop drive versus desktop IDE drive.

Bluebird

Hi,
Has there been any update to the HbbTv implementation status?

Bluebird

I went to Milliways once with a mixed experience. When the waiter went to get the order from the next table, they said they were waiting for someone. Their father or leader perhaps. Mind you the waiter was right, the beef does sell itself. My wife has indicated the font in the epg is a bit small. I ...

Bluebird

Hi, Changed font size to 20 as Star6key suggested via Windows Explorer, and works a treat. Title font size is similar to Virtualkeyboard's font. Picked longests recording name "the chronicles of nania: prince cas", and it still left 1/3 of space unused. Whilst not as good as scrolling, ver...

Bluebird

Yes, moving the cursor until it disappears and adding an extra number of cursor left movements does work.
Another workaround is to shorten the title when adding the prefix.
Seems scrolling is difficult.
How difficult is making the font smaller?

Bluebird

With the DP series, my wife and I kept track of what we viewed by adding a prefix to the title of the recording. This worked well, and when we had both seen the recording the last to view it would delete it. I have tried to do the same thing with my T2 and found the title of the recording in the &qu...

Bluebird

If you attempt to delete the mountpoint, do you get an error and a system reboot?
Might be similar to another thread.

Bluebird

Key presses. Menu Select "Sources" Wait spinning star. Then there was a selection of mount points with the red "delete" button was available. I am mostly working from memory. I remember I had the option of pressing "delete" on any of the mountpoints. I am unable to reac...

Bluebird

Hi, I had a similar experience. I was looking to create mount points for Windows shares on a PC and managed to create a mountpoint which seemed to be on my T2, (\media\autofs maybe) Problem I didn`t realize at the time was the T2 had no hard disk. I went back into Mount manager and deleted the mount...

Bluebird

Hi, not exactly a bug, but a typo. The option in "Edit AutoTimer" "Begin of timespan" perhaps should be "Begining of timespan"? Button sequence to see this: EPG Blue (Add Auto Timer) Green (Ok) Get you into "Edit AutoTimer" screen. It is the bottom option on m...

Bluebird

I conversed with DTC Help desk and this topic has probably come to an end.

The help desk was able to replicated the condition on their own T2 using a Microsoft 600 keyboard.

The mini keyboard available from DTC does NOT replicate the condition.

Seems like a driver issue.

Marty.

Bluebird

Thanks,
I think I will wait for the official app.
VU+ just doesn't connect to the T2 even if ip address is entered.
Marty.

Bluebird

Hi, I read on the forum that VU+ player can be used to stream from the T series. From Google Play I was only able to find VU+Player HD. I expect it is the updated version. Problem is I cannot get it to connect to my T2. I can connect to the T2 with OpenWebif. Can anyone guide me through the settings...

Bluebird

For what it is worth, I recently noticed this on my DP-P1. I was chasing a loss of signal strength on the 10 network and did 3 things. 1/ moved the power injector for my masthead amp away fro the DP-P1. 2/ tightened the f link connector on a 1 to 2 splitter leading to the DP-P1. 3/ installed a dgtec...

Bluebird

Resquest sent to dtc. Ref 125878.

Bluebird

Initial setting is "All Supported", but the remote shown on the help menu was the T3 0xabcd or T3 alternate 0xAE97. No problem with changing it to 0x02f2. Save and yes it accepted. Choosing 0x02f3 and yes it not selectable. 0x02f4 and yes is not selectable. 0x0933 and yes is not selectable...

Bluebird

Turned on T2 with microsoft keyboard and receiver reported "no input". Waited 60 seconds then powered off. Disconnected keyboard and powered on. Had Beyonwiz logo in 5 secs and bubbles shortly after. Unless I should have waited longer, I don't think the different keyboard made a difference...

Bluebird

I have a Microsoft 600 wired keyboard. A quick google doesn't seem to show any problems.

I will:
Shut down T2 and turn off power.
Connect keyboard to front port and have tuner on back port.
Then power up, and see what happens.

Bluebird

Hi Ian,
The second keyboard is a Logitech Internet 350. It is a usb keyboard and 5 to 8 years old.
No bluetooth.

Marty.

Bluebird

Thanks for the reply. Did some more testing. Plugging in a wired keyboard and it doesn't seem to be detected. Factory reset did make it detectable. Restarted gui and I was able to type into the browser. Changed wired for wireless, and it stopped working. Ok. Restarted gui again and was able to type ...

Bluebird

How can I check usb keyboard drivers are installed on my T2?

Bluebird

I have tried to attach a wired usb keyboard in either of 2 usb ports and when a reboot requested via the menu/setup/power/reboot , the T2 shuts down and I don't get the splash screen. Manual power off/on and no change. Unplugging keyboard, and power off/on and reboot occurrs. Usb tuner was not conne...

Bluebird

T2 was able to be rebooted when I unplugged the keyboard.

Bluebird

Internet browsing. This is things get interesting. Pressed the "web" button and was able to get to the Google page. I did not find a way of typing into the browser. Plugged in a usb keyboard and still nothing. Purchased a Logitec K400r, plugged it in and still nothing. Rebooted T2 and it ....

Bluebird

Networking with a Windows 7 machine. This turned out to be a none event. Ran the network setup and in short time was playing an mpg4 file off the shared folder. No spinning wheels, very snappy. I think all the settings I had previously adjusted to improve the reliability of to dp-p1 more than covere...

Bluebird

Thanks for the reply. With the DP-P1 it is not a problem I experienced. To keep things nice and simple I am trying to keep the number of remote controls down to a minimum - one. Once I have selected the receiver's "channel", everything else is done on the DP-P1's remote. I hope the T2 will...

Bluebird

First impression. What did I spend my $300 on? Weighs next to nothing and it so tiny!!! I had been trying to decide if I should have bought one with a hard disk or installing a large drive into my PC for storage. With hard disk mounting "kit", I installed a 2.5" drive. I would recomme...

Search found 57 matches

About the Forum

Join us