Beyonwiz Australia

Videonut

I finally have got the EPA column width correct thank you.

The other problem getting the favourites opening the EPA still isn't working despite rebooting a couple of times.

Videonut

I haven't been able to look at this problem again for the past few days. I have encountered another problem on the PC about what appears to be about the connection between TV that might have some bearing on the main problem If I go to Bluetooth & other devices in Windows 10 I can see that the TV...

Videonut

Perhaps these 2 photos that I have attached will explain just where I'm at with this.

Thanks again for all the effort.

Videonut

Thanks for the answer but I'm still missing something and I don't have a clue as to what.

What I really need is for someone in Perth to come and set things up since Warkus seems to have entirely quit or dropped off the radar.

Videonut

Is there a guide somewhere that shows you how to do this?

I have the V2 connected to ethernet as well as being connected to PC via Cat 5 cable.

Thanks in advance

Videonut

I finally have had the time to check out the things you asked about and I have found out a couple of things that I can't explain. The cat cable runs from my PC directly to the router set behind the TV. Upon inspection I was surprise to see that the cable had dropped out of the slot and that the clip...

Videonut

I did a restart but this didn't help. It tells me no network devices found. Network test says local network disconnected, and that both my IP address and Nameserver are unconfirmed. On LAN connection page all current settings say N/A. I have a cat cable running from PC to the V2 so I have sèen other...

Videonut

I have been having problem with network for a few days but now it's worse. Today I got the attached message. I have looked at setup networking but don't know where to start. I have tried a few things there but gave up because I might make things worse and as you know my network at home is working. I...

Videonut

I do know this. The EPG settings say 'Fake recording."

There are no Timers at all set for 17:30 of any type.

I'd like to say more but have 2 Great,Grand Kids here at moment.

Videonut

First up after reviewing my posts I notice that they say this happens at 5:00pm. This should have said 5:30pm. In any event this still happens every time my wife is watching at this time. The screen switches from playback automatically to live TV. At least when this happens its easy to go back to th...

Videonut

Here it is several weeks later and the exact samr thing happens everytime we are watching any recorded program at EXACTLY 5:00 PM and we never record anything at all at this time.

And to answer are you actually using the EPG refresh plugin, well the answer is yes.

Videonut

As I understand things my V2 has the maximum number of tuners.

If I give this mini to grandkids for use on a PC shoud they be able to either watch or record TV programs?

Videonut

Thanks for that surprising update as it only confirms that I'm loosing my marbles. I had thought that my V2 had 3 tuners but maybe not. I do have a USB hub here somewhere but I think it might be just a switch that requires user input everytime it's used rather than being something that can turn on w...

Videonut

Going through a lot of elctronic bits & pieces I came across what looks like a small tuner because the label says Beyonwiz mini and has USB on one end of a short wire and an antenna connection on the other. Where do I plug it into my V2? All I can see is a Bluey which is looped over to the anten...

Videonut

Quite a few programs that we have recently tried to watch it's noticeable that the audio and video isn't synchronised.

I've never encountered anything in the V2 that suggests that I can make correct to this but perhaps I've missed it.

Any ideas?

Videonut

Several times lately I have found the EPG updates haven't been working properly and today on a turned on the machine I get this message pop up on the screen. If I turn on V2 and select EPG most days the screen isn't populated. If I ask that the screen to be refreshed almost nothing happens so I have...

Videonut

Thanks for the reply but I now have a more important problem. I went to my movie folder to confirm that we had successfully recorded several programs last night but nothing with listed. I then went to the timer list for all of my requested recordings. They had been listed and according to this list ...

Videonut

A few nights back we were watching recordings on my V2 when the picture suddenly switched to a live broadcast. I didn't think much about this at the time but then it's happened again the next day and the day after. I have tried to track down the cause of this behaviour without success. I have looked...

Videonut

Well I tried all things suggested but nothing changed. I left the TV on while I was in another room and sudendly and then I heard sound. What changed I have no idea. I have no explanation for this. The only other thing that I had tried after posting my question on forum was to go back to the CEC set...

Videonut

I'm having an unusual problem with my V2. If I try to playback a recorded program I get no sound. The same if I try to watch live TV through the V2. I have even set TV to play through headphone but sill no sound. It's as if the TV has lost ability to play sound but this is not the case because if I ...

Videonut

I got my address and keyed it into my tablet and I got a notice saying that it was unsafe and not to proceed.

Next step is? Do I have to change the Configuration for Openwebif?

Videonut

I used to have Openwebif connected on TV as well as my old pc. Now I can't get into it anywhere. I did download the this plugin and I can open it but that's as far goes. I can open Openwebif on tv to configuration page but what setting if any should I change? If I get time I am considering trying to...

Videonut

I now have the latest Firmware installed and it appaears to be working ok. It was rather easy to select the channels that were wanted to create a favorite list for the EPG. What I can't find at the monent is how to either delete channels from the list or move them up of down. I know that this can be...

Videonut

FAT32 made it work. Thanks a lot.

What if anything changed from previous update of F/W?

Videonut

I have just followed this procedure but when V2 booted up from recovery mode from USB all I get is. Error from download and front of V2 shows E02.

Where do I go from here?

Videonut

Where do I find what version Firmware my V2 is running?

I haven't done any updates lately. Do we get told what is in each update?

Videonut

You locked my last posting saying what a solution had previously been posted, but you never said where. I have looked at many other postings and seen some suggestions, but none have worked, I did a search using looping and my posting was the latest and the right-hand panel shows the previous posting...

Videonut

I turned on the V2 this am and got a message that it wanted to do updates. I said OK & when I rebooted I got an error message. The V2 continued to reboot and said to post logs to forum. The V2 then just continued to loop with the same message. I could only use my camera to take photo from my scr...

Videonut

Every so often I have tried to get my V2 to connect to my PC so that I can play PC content on my TV which is in the living room. I have never been able to do this despite having both Wi-Fi & Ethernet connecting to the living room. If I'm at PC I can see the V2 in Windows network area as well as ...

Videonut

I think that I have most of the info requested, see attached files.

Videonut

My V2 is not only turning on exactly every day at 8:am, but at other times during the day as well, and a couple of times it's turned itself off as well. My prime suspect now is the EPG timer updater. Only once have I seen the updater turning itself on, but when I go as far as I can on the EPG to the...

Videonut

The TV still comes on at 8:00am, and the only thing that I can find with any '8' in its setting is that I'm in a +8 GMT time area.

The TV is also coming on at other times as well, and the only thing that I can think of might be the EPG auto update. Is this possible?

Videonut

I have set EPG to just look at Favourite's boutique, thanks for tip. The TV came on gain to day and I checked what HDMI input it was using, and it wasn't the one for the V2. The culprit is almost certainly a new Chromecast with Google TV stick that I have. It's using the HDMI assigned to it, but as ...

Videonut

Well it's been a few days now, and I can report that I have the latest firmware with the addition of the automatic beta updater. I noticed that updater was the first thing I saw on the screen for the past 2 days when it offered me, 40 odd updates on the first day and about 18 the next day. I just to...

Videonut

I have a screenshot of my current info on my V2, just so I could ask does the F/W look correct or not? The reason that I ask is that I looked earlier, and it looked as if I had the same old F/W installed. I still had the USB stick with F/W on it and knew that the small upgrade to the beta upgrade ha...

Videonut

You say that CEC is turned off on the V2 but a for many months it was working OK, just 1 press to turn both V2 & TV On or Off. I watched TV come on this morning at exactly the same time. I can't think of anything that I have set to come on at that time. I'm uncertain that Autotimer is running au...

Videonut

I have for the past few days noticed that the TV is being turned on at exactly 8:am. I suspect that I might have a wrong setting in the CEC area, but haven't out where exactly to fix it. Any ideas? I do have other devices that interact using CEC, but I don't think it's any of them. I also not that t...

Videonut

I'm back.

My V2 appears to be working correctly now except for one small thing.

The red button that normally displays 'red' is now saying 'tags'. How do I change this back?

I have never used tags because I have never stumbled across anywhere explaining their uses.

Videonut

I found these 2 devices in and old drawer, and I was wondering if I could use them either on my V2 or PC? One is labelled as a Beyonwiz mini and has USB on one end and antenna connector on the other, so I though that if it's still working I might be able to use it on my V2 or my PC? The other is a m...

Videonut

I now have what I hope is the correct F/W installed. Firmware version: beyonwiz 19.3.20210704 (20200822-114-g0e3c746) Kernel / Drivers: 4.4.35 / 1.2V-20201218170347 I have also set up my location favourites etc and the machine appears to be working correctly. I still haven't tried all installing the...

Videonut

OpenWebIf confirms that I have the latest F/W installed. I have set up network, location and chosen favourites (although I can't recall how to get just those channels displayed). I'll leave plugins until I get the beta file installed. I also have the beta file now on PC's desktop and presume that It...

Videonut

I have just booted up, and I am offered these options
1. Startup 1
2. Startup 2
3. Startup 3
4.Recovery from USB
5.Recovery from Network

I don't that if any to choose?

Videonut

It seems that I've stuffed up again somehow because I took a look at my settings information tab and it shows that I have the wrong firmware installed. Using OpenWebIf I took a snap, and it says version 19.3 2019 1106 (19.3-g6f50). See screenshot attached. (I suspect that I should be able to take a ...

Videonut

You're recommending that I install version 20210704 which is underlined as a link, but when I click it takes me to a dead page. If I go to the page that says is the latest software for each model, it's all about 19.3. I'm still uncertain as to I should be getting an official version or a beta and wh...

Videonut

New day and a few more answers. I have rebooted several times. I have tried the plugins route from live TV to try to restore system settings, but all I got was a large black rectangle that had no buttons that took you anywhere. I am running the latest Firmware for V2 19.3.20200328 The video I mentio...

Videonut

Nothing seems like it should. I have taken 3 terrible screenshots from the TV screen that might give you a rough idea of what I'm encountering. The one that I had hopped would work is the one that displays what I see menus and select setup. You can make out the writing it I move up down button on th...

Videonut

When reviewing many of the V2's options, the other day, I made the mistake of clicking the option to see what the other skin looked like. Big mistake. I can't get to change it back, and as a consequence almost all the machine's functions either don't work or are or inaccessible. The machine in now v...

Videonut

Nobody from these forums has ever visited my house since Warkus came about 3 years and I haven't moved. I have sent emails & left phone calls for him but never received a reply. It would be good if he didn't appear to have an overload of work. I have done the Internet test in B/W menu and all 5...

Videonut

I should have mentioned in a previous posting that nobody from these forums has ever visited my house.

My interned speed is still officially 50MBPS. However, I' have been given from IINET a free 6-month upgrade . My last speed test was 267MBPS. It's a pity that I can't use this extra speed.

Search found 241 matches

About the Forum

Join us