Not sure either. The company is registered to Jai Kemp who is based in Sydney. The ABN still seems to be current, but the company name appears to have been cancelled.

MrQuade wrote: ↑

Wed Mar 16, 2022 10:00

You may want to try contacting Beyonwiz through the sales email address instead.

Unfortunately, my recent experience is that a sales enquiry sent to the sales email was also ignored. Sorry, I know that doesn't help you out!
(Edit - Typo)

Hi all, I'm after a replacement remote for a U4. I know that they are listed as available on the shop page, but based on my and others' recent experiences with zero response from Beyonwiz support, I'm concerned the remote will never arrive! Has anyone had recent success with the shop or able to reco...

Thanks for the responses. To clarify, I agree that fixing multiple issues at once is not the ideal problem-solving technique. For what it's worth, I upgraded the FW once everything was sorted. At various times I had replaced the batteries in the remote. I had also previously completely isolated the ...

While I'm afraid to say it out loud :D , the skipping/down arrow issue seems to have stopped. I'm not sure exactly what has done it, but I have changed the cable to the HDD and removed the batteries from the beyonwiz remote that came with the unit. I also installed the most recent release candidate ...

Thanks, I've changed the cable and to remains connected to the USB 3.0 port. The HDD drive was supplied by Beyonwiz. Will see if it makes any difference

Thanks, will try a different cable. The HDD doesn't have an external power supply

Hi all, After being reasonably well behaved for some time it has now become unusable. Skipping and cycling through menus has hit overdrive. After doing a reboot it seems to behave for a few hours then goes crazy. Same as last time I disconnected everything and made sure the remote sensor was blocked...

Hi all, I have got a new router (Netcom, NF18MESH) and my FTP transfer speed (using Filezilla) has dropped from about 40-50 Mib/s on my previous router to about 10 Mib/s. Logic suggests it is an issue with the router. The route is laptop to router (173/173 (Mbps) wifi) - router to Beyonwiz V2 ethern...

Did the trick, thanks

Thanks - will give it a try

Thanks Grumpy_Geoff and PRL - happy to make use of a script if you're so inclined. It's probably about 40 timers (kid's shows are all short timers) and there are no non-ICE timers.

Thanks

I use ICETV to manage timers (lots of ABC2 stuff for the kids). Things seem to have got out of sync somewhere. Is there an easy way to bulk delete all timers on the Beyonwiz before resending from ICETV?

Thanks, Paul.

No, I haven't. The first time it did it I reinstalled the firmware and that fixed it, no luck this time. If I connect my TV (Samsung) to it has a mini-server it streams fine, making me think it isn't a hard drive issue. Do you happen to have ICETV by any chance? Not sure if that might have an inpact...

When reconnecting things one by one: network cable made no difference but when I reconnected the HDD the jumps started again. The 3rd tuner is disconnected still. If I stream a file from the V2 jumps don't occur

Could reformatting the HDD help?

Thanks, Paul.

Thanks, I hadn't changed anything prior to the problem starting again. I thought re-installing the FW might fix it - no luck this time :-

(

Unfortunately it started happening before I did the FW, but will remove the usb tuner

This problem has started again. Reinstalled the firmware but things didn't improve this time. The jumps now seem to be bigger, however. The device is unusable on both live TV and recorded files. Does anyone have any ideas? I'm tearing my hair out.

Thanks, Paul.

peteru wrote: ↑

Thu Sep 03, 2020 03:25

reinstalling the firmware.

Thanks for the advice and sorry for the long period of silence - life got in the way

Turns out that reinstalling the current firmware did the trick - thanks one and all for the advice

The Beyonwiz is in a solid cabinet. I closed the door so that no IR signals could reach it. I've done this a few times over the last 24 hours. I've attached the log - thanks

Now doing it worse than ever. Totally unwatchable. I turned off timeshifting in case that somehow impact recording playback, made no difference. I triple checked no remotes could reach it and disconnected it from the internet in case something weird was happening there - all made no difference. I do...

My V2 has developed an annoying issue. Over the last day or so my V2 has started jumping back about 10 seconds or so at random intervals. This occurs on playback of recorded files and live viewer. Anyone got any advice on what it might be? I have powered it down and restarted it in case that fixed i...

Thanks, Grumpy, I logged into the extender, change the range to include the address I used at home and logged in. Can now use the remote via laptop and iPad. Much appreciated, especially in light the of rain predicted for the next week!

Hi all, I'm away with the family in Nelson Bay for the week. I had the great idea to bring the V2 with me, the problem is, I left the remote at home! I thought I'd connect to the V2 via an ethernet cable connected to a wifi range extender. The range extender is then connected to my mobile hotspot. I...

Yep, all fixed now - thanks

Hi, I have and use ICETV for EPG and recordings. 9Rush appears in my EPG but is empty. When I go to ICETV it shows as available and I can successfully set 9Rush shows to record and then have the instruction to record set on the Beyonwiz. Any idea on how I go about getting the 9Rush to populate the E...

No idea if this will work, but have you got the Beyonwiz to reboot with the HDD attached?

Hi, is it possible to stream from the V2 to a Chromecast on another TV? If so, can you stream one recording to another TV while watching a second recording via the HDMI output on the V2.

Thanks, Paul.

Hi, is there any way to make the menu 100% non-transparent. ie you can't see the picture behind the menus, media lists etc.

Thanks, Paul.

Thanks, favourites it is

Hi, I have a lot of recording on my 2400 I want to copy to my V2. I can connect to both via FTP using filezilla. Does anyone have any suggestions on how I might transfer them without copying them onto a PC and then from the PC to the V2.

Thanks, Paul.

Hi, after many years with a Topfield I have got a V2. Bit of a learning curve! Is there a way to delete unwanted channels? EG Racing.com

Thanks, Paul.