Beyonwiz Australia

Pete123

prl wrote: ↑
Sat Jul 16, 2022 11:55
I'm still interested in hearing whether 7mateHD has been added in any regions in Victoria (or elsewhere) that are part of the Prime network.

Ballarat is now showing 7MateHD as well

Cheers

Pete123

Here's Mt Gambier & Ballarat

Pete123

Hi Peter,

I've attached a new scan of Mt Gambier & Ballarat, as the previous one had some service names missing and hence no picons created for those services. The new scan has the correct service names.

Pete123

Scan data for Mt Gambier and Ballarat attached.

Pete123

I'd appreciate it if whoever contributed the Mt Gambier & Ballarat scan data could post an update, because both it and the Warrnambool scan contain Ballarat stations, and they now cause conflicts in my picon setup generation scripts :( That was Pete123 - https://www.beyonwiz.com.au/forum/viewto...

Pete123

Could the tuner status indicators be moved to above the signal strength bar (before the resolution display), unless that area is reserved?

Pete123

Is this what you’re after?

MENU - Setup - System - GUI Settings - Show info bar on skip forward/backward

Pete123

adoxa wrote: ↑
Sat Jan 25, 2020 18:24
Here's the patch.

Thanks for the fix

Pete123

Grumpy_Geoff wrote: ↑
Sat Jan 25, 2020 17:54

adoxa wrote: ↑
Sat Jan 25, 2020 16:51
Huh, apart from "No" they're all broken, the left ones are just more noticeable.

I have 'Percentage right' and I don't see the issue.

Edit - maybe because I have my UI resized?

And I only see it with progress bar left or percentage left. All others are okay.

Pete123

Ok, I’ve found the setting...

From live tv
Menu
Setup
TV
Channel selection
Show event-progress in channel list ——> Change to: Progress bar left

Pete123

adoxa wrote: ↑
Sat Jan 25, 2020 11:03
If you wouldn't mind posting your backup/settings I could see if it affects the test V2.

Here's my T4 settings backup that has the issue.

From my testing so far - from a fresh clean install, I've changed to FMW and added EPGRefresh and YourTV.
No problems yet.

Pete123

I’ve now updated the firmware to latest (20191106) and if I don’t restore settings, the problem is gone. If I restore settings, the problem reappears. So, it sounds like it’s something peculiar just to my setup. Since it occurs on both of my T4s, it’s likely not a corrupted config. And it’s not skin...

Pete123

Can't reproduce on the default skin. It looks like you are using overlayHD, so you are probably SOL. IanSav is no longer maintaining this skin until the Beyonwiz firmware is in line with OpenVix. BTW, an easier way to get to that screen is FAV->BLUE It’s actually Full Metal Wizard, but it looks lik...

Pete123

Came across a graphic overlay issue on a T4 with firmware 20190818

From live TV
Press MENU
Press Channels
Press Menu
Press EXIT

I then see folder icons overlaid on the bouquet list:

: 005F9B71-6B69-411D-8C25-E3D43DEE4880.jpeg (71.69 KiB) Viewed 5619 times

Pete123

I know this is fixed now, but would the following setting have worked for this?

From live tv:

MENU > Channels
Highlight offending channel from within one of the bouquets, then
MENU > (5) Hide dotted line on the top for this service

Pete123

Mt Gambier (regional SA) has had 7Mate in HD for a few years now, but the picon is just the standard 7Mate. The broadcast channel name is also still 7mate (not 7mate HD). In fact I have that serviceref in my scan data. The picon setup script uses the broadcast channel name to match it to the picon ...

Pete123

Mt Gambier (regional SA) has had 7Mate in HD for a few years now, but the picon is just the standard 7Mate. Changes to the picon require a software update on the Wiz. Yes, I understand that. I just posted the info in case it was of any interest. (Edit) I’ve just realised I should have said channel ...

Pete123

Mt Gambier (regional SA) has had 7Mate in HD for a few years now, but the picon is just the standard 7Mate.

Here’s the Service Information screenshot in case it helps..

Pete123

Works perfectly. Thanks very much, Adoxa

Pete123

Yes - 7TWO Mt Gambier is 62, and 7flix Ballarat is 66 (which works fine).

Pete123

Nice work, that works well! It now automatically selects the correct region (Ballarat or Southeast SA) and the timezones are correct for each. It produced the info for the correct show every time. The only thing I found was that it can’t find an LCN for 7two Mt Gambier (either automatically or manua...

Pete123

Yep, it looks like a lot of the Ballarat LCNs are in the duplicate range. So, in that case I’ll just stick to using YourTV on Southeast SA only. I’m happy with that.

Cheers and thanks

Pete123

You’re quite right - the timezone is incorrect when I select Ballarat VIC (because I’m in Mt Gambier SA). If Ballarat is selected and the show is within half an hour of the next show, then YourTV shows the info for the next show. It’s fine if I select South East SA, of course, but then that only wor...

Pete123

I wasn’t aware I could reselect the region via the MENU button. So, this is all I really need. While a dedicated button would be handy, I don’t think it’s worth changing the code just for me. (I’m not sure how many other users need to regularly change regions, and there is a workaround). Cheers, and...

Pete123

Hi adoxa, Thanks for creating this extension. It’s handy being able to get episode information, and i find it quicker than IMDb for retrieving basic movie info (year and cast). So I like it. But, I think I need a customised version. I live in an area where I pick up two regions (Mt Gambier and Balla...

Pete123

Yep, that must have been all it was. I didn’t restart after installing the plugin because I’d installed it the day before trying it, and as I have the box set to go to Deep Standby each night I assumed it had had a restart. However, sometimes the box doesn’t shut down, especially if it’s recording w...

Pete123

Hmmm, I have the same settings as you, but just keep getting the actual help screen (long or short press) rather than a screen capture. I’ll try it again tomorrow after work.

Cheers for checking

Pete123

Hi, T4 on beta 20190718 I’ve downloaded the ShootYourScreen plugin, but I can’t get it to work. Either the plugin isn’t working, or I’m not using it correctly (most likely the latter). I’ve tried switching Help and long Help, but no go. There’s no notification when Help (or long Help) is pressed, an...

Pete123

My preferred form for the ZIP ifle is for it to contain Mt Gambier/getservices.xml (or Mt Gambier\getservices.xml if you prefer) rather than Mt Gambier.xml . All my scripts expect that form. I maintain data for 33 regions, so even though it's easy to fix, it's much if things are already in the righ...

Pete123

Peter, here's a scan for Mt Gambier.

Note that 'GEM Mt Gambier' is HD (has been for a few years) but has always just had the standard GEM picon.
Are you able to assign the GEMHD picon for this service?

Thanks

Pete123

I think this fix may have been missed or forgotten.

Is it too late to have this included in the firmware that's about to be made official?

Pete123

I did an IMDB search on Cold Case on a U4 running 20190207, and I got the error "IMDb Download: could not convert string to float: Error please try again. That is the error that was originally reported in this topic. Is that the error you got? If not, what is the full error message that you se...

Pete123

The fix has been merged into the enigma2-plugins repository and should be in the next release.

Hi, I’m on 20190207 firmware (online updated) and the above IMDB issues are still present for me.

Do you know if the fix was included in these latest firmware updates?

Thanks

Pete123

I think that adding it should be possible (it would use the same mechanism as the infobar). But as for all the other indicators, it wouldn't really tell whether a program has subtitles or not. Please don't worry about it I just thought that if subtitles were able to be detected, and it was trivial ...

Pete123

Thanks for the explanation, Peter.

I have a T4, so no front panel indication like the U4 and T3.

It's not a problem, though. It's not hard to just test each time with the subtitles button.

Cheers

Pete123

Is there a way to tell if a TV program has subtitles (closed captions) available, without having to press the subtitles button on the remote and wait to see if subtitles appear or not?

I've noticed that the infobar has a VideoText icon, but this doesn't appear to be for subtitle indication.

Thanks

Pete123

Thanks prl

Pete123

Just another minor one...

The User Rating doesn't appear to be working - all searches just display "no user rating yet".

Pete123

Just wondering - What is the reasoning behind having two screens for the scraped info (I.e. Details and Extra Info)? Lost in the mists of time, I'm afraid. There is almost no design documentation or even in-code comments in the enigma2 main code or in most plugins. The decision doesn't seem to be d...

Pete123

Personally, I prefer the 2 screens. On the first page, I rarely (if ever) would scroll down as the first dozen cast lines pretty much tells me the important actors. Once the plots/summary gets put back onto the 2nd screen, that's all I really need to see and would rarely have to scroll down. Pressi...

Pete123

Just wondering - What is the reasoning behind having two screens for the scraped info (I.e. Details and Extra Info)?

Personally, I'd prefer to just keep scrolling down after the Cast List to read the Extra Info, rather than having to press the BLUE button.

Not really important - Just a thought.

Pete123

Star6key wrote: ↑
Sun Jul 08, 2018 19:09

Ahhh, right. Well in that case... the only things missing (for me) are the plot and outline.

+1 from me

Pete123

yeah i was probably on firmware from over 12 months ago so I suspect this was it and I have assumed it was the HDD. That makes sense I knew it wasnt making a noise before, I now need to make a decision to kill the fan completely in standby or not, I suspect if it used to be off it should be safe to...

Pete123

I never noticed that in standby before now so maybe it was turned all the way down in the older firmware i had which was a few firmware versions old. Fan Speed Control for U4 & T4 was added to 17.5 series firmware, so if you hadn't updated for a while this would be new to you. I'm not exactly s...

Pete123

dfp wrote: ↑
Sun Jun 17, 2018 19:30

It is quite low but still partly there, how safe is it to turn that right down for standby

I'd try turning it all the way down, temporarily at least, to determine if the noise you're hearing is the fan or not.

Pete123

I am now wondering that too! Should that be running 24/7? Ie often it runs all night long with no timers and I can hear it in the morning. It has a high pitched whine too it similar to a hard drive spinning noise but could very well be the fan. Check the fan speed settings in the main menu: From li...

Pete123

On an initial boot the hdd does write for awhile when then put into standby on those counters but once its idling with no writing the hdd is still whiring away but no actual clicking heard just the spin of the drive. Probably a silly question, but the whirring noise you're hearing wouldn't be the c...

Pete123

MrQuade wrote: ↑
Thu May 10, 2018 19:38

Pete123 wrote: ↑
Thu May 10, 2018 19:29
I agree. But it seems to have worked for singlefished, so I'll see how it goes for me. If it happens again, I'll compare the eit of the shows.
I think that singlfished meant that he was getting gaps in the EPG but not necessarily getting doubled up recordings.

Ah yes, that makes sense.

Pete123

Grumpy_Geoff wrote: ↑
Thu May 10, 2018 18:10

I'm struggling to think of how a lack of having EPGRefresh running could cause duplicate timers to be generated from the AutoTimer plugin.

I agree. But it seems to have worked for singlefished, so I'll see how it goes for me. If it happens again, I'll compare the eit of the shows.

Search found 68 matches

About the Forum

Join us