Beyonwiz Australia

rfmoore

Where can I find the latest IceTvDesc file and the latest IMDB file for a T4

Reg

rfmoore

I’ve been with boost for at least 8 years on a $30/20Gb prepaid plan and am completely satisfied with them although the are going to limit my download speed to 150mbps from April. I occasionally stream from streaming services directly to my phone or tether it to my tv via Crome cast, have never run ...

rfmoore

adoxa wrote: ↑
Sun Jan 22, 2023 16:53
Here's a couple of scripts to switch the beyonwiz.org feeds "off" and back "on".

Thanks

rfmoore

If you have shell access I believe you could simply enter echo '127.0.0.2 beyonwiz.org feeds.beyonwiz.org beta.beyonwiz.org' >>/etc/hosts ; otherwise just put that line in a .sh file and run that. Anoxa, Sorry I didn't make my self clear in my last post. I only know how to run .sh files that you Ga...

rfmoore

The simplest way to protect yourself would be to add the following to /etc/hosts on each of your Beyonwiz machines. 127.0.0.2 beyonwiz.org feeds.beyonwiz.org beta.beyonwiz.org That should redirect connection requests to go to the local machine, which should immediately respond with an error. I'm no...

rfmoore

I'm in.

Reg

rfmoore

This feature is already built into our base firmware. Where is this feature located on my T4 Build 20210900 I created my own bouquet deleting all the shopping and racing channels using Webif, the process was very labour intensive. Dose this apk allow the user to delete channels before it automatica...

rfmoore

Has any one connect the above to a T4? If you have what was your experience? What was the harmony remote Tv brand you used?

Reg

rfmoore

Thanks all bootloader and front panel all up to date. The Beyonwiz community and the company would be at a loss with out you volunteers.
Reg

rfmoore

I had tried reflashing but that did not work with previous sticks that I had used until I resorted to the original USB stick that came with the T4. The machine is now running normally with the latest software 20210119.

Reg

rfmoore

My T4, running the beta software 19.3 20201121, is not booting passed the initial circular Beyonwiz, with the power button icon, Logo. When I left it recording last night it had 12% recording space left on a 2TB internal hard drive. After it finishes recording it goes into standby mode. When I activ...

rfmoore

Thanks Geoff works a treat.

Reg

rfmoore

Now that I can tune into the stations, noted in the subject line, on my T4 ,Build 20201121, am I able to save them to my internal HDD?
Reg

rfmoore

How can I set up a button to access the T4’s virtual keyboard on my Logitech Harmony Hub? I access the Hub with my iPhone or the Harmony remote. Setting up a tex button on my iPhone only accesses the Tele Text function. My T4 is running 19.3 20200405.

Reg

rfmoore

I am thinking about buying an Aldi 65" Smart Android TV and connecting it to my T4. Has anyone had any experience with this combination in relation to T4 setup and TV reliability?

Reg

rfmoore

I have a T4 and am a novice in the area of adding these things to my machine. Is there a self help video or can some one help me in posting the steps required from after opening the URL http://images.mynonpublic.com/openatv/6.3/index.php?open=beyonwizv2c on my Windows 10 laptoTo having the plugin ru...

rfmoore

New pic on 44 Adelaide works

Reg

rfmoore

Can I install Kodi or Kodidirect onto my T4? If so what are the steps involved ie where can it downloaded from and how do I install it.

Reg

rfmoore

I have downloaded the attachment below to a usb drive and can see it on the T4 but do now know how to install it. Can you advise the appropriate steps needed.
enigma2-plugin-systemplugins-directorycount_20180729.2_all.ipk.tgz
(57.15 KiB)

Reg

rfmoore

Well chaps that was easy. Thanks. I've only spent 2 days trying to sort that out.

rfmoore

Just to confirm, when trying to change the IR code set, when I point the original remote towards the Logitech hub the the code set is changed from that of the original Code set and the set changes through each of the sets in turn each time I follow this procedure. The reason I ask is that when I tri...

rfmoore

I have just connected a Target FW 1707 soundbar via my T4s' RCA audio ports. Using the Harmony companion or phone app to change the volume on the sound bar causes the T4 to change the Channel on my Sony Bravia tv. Using the soundbar's remote causes the same result. Some of the other soundbar remote ...

rfmoore

I'm still having trouble tuning in to the Adelaide community tv station Channel 44 which transmits on 564.5MHz (Channel 33) When I do an automatic Australian scan or Adelaide scan the frequency scanned is 641.5 MHz(Channel 44). When I do a manual scan for 564.5MHz I get the same result as the other ...

rfmoore

Terry,
As I understand the series2folder program every time you update your operating system to a new version i.e from 16.xx to 17.xx you have to reinstall the series2folder program.

Reg

rfmoore

I'm a little confused are these three files, Moviejoin, Movie-marking and Multiselect just modifications of the one plugin or are they three different plugins? Do I have to load the three separately or need I only load one and have the three functions available.

Reg

rfmoore

How can I tell if my T4 is turned off at the power plug or in the deep standby/shutdown mode? On my machine the front panel has no indicator shown when in either state. I seem to recall that in the deep standby/shutdown mode the blue light stayed on but this is no longer the case since I installed t...

rfmoore

I'm using a Beyonwiz T4 on the Beta feed with an Ice TV subscription. I have Just installed the latest beta update 20170711. Previously I have done full frequency scans for Adelaide and Channel 44 641.5Mhz, the community TV channel, has been scanned in and transmissions have been received. After ins...

rfmoore

Ive had a Harmony 650 for about 6 months. It replaced a Harmony 785 which i dropped once too often. I find the 650 reliable but it does chew up batteries. I solved the problem by buying a charger and 4 chargeable batteries otherwise it would be expensive to run.

reg

rfmoore

I am not getting audio from an .mpg file which I copied from from my Windows PC to my T4. The .mpg file was generated when I played and recorded a DVD consisting of TS video and audio files via VLC on my PC. The visual aspect of the file plays on my Sony TV via the T4 but there is no accompanying au...

rfmoore

I have recently installed Windows 10 over the Windows 7 operating system on my Laptop. I have a T4 with the latest Beta software installed and am able to access its files from my laptop via my WiFi network . I have turned off "Public folder sharing"in the "All Networks" section o...

rfmoore

And a Cromecast will also work with iPhones and iPads at less expense than an Apple TV unit.

Reg

rfmoore

Thanks that solved the problem. I also had to change the players screen setting to YCbCr (4:2:2) to reduce dots (noise?) shown on the screen. I don't know what we'd do without you wizards.

Reg

rfmoore

How do you set the Dolby down mix. I'm having trouble getting a DVD audio to play Dolby sound through the HDMI in port of my T4.

rfmoore

I'm using an iPad3 with the safari browser. I'm finding the format has changed in that the number of pages of posts for a particular subject are partly over written by lengthy descriptions of the post and the poster. I have included an attachment showing the problem I'm experiencing. I have delibera...

rfmoore

I just installed the latest USB update and noticed series2folder had disappeared when I selected Menu when in live TV. Is this normal? I have since reinstalled the plugin which is again working well.

rfmoore

Not sure how to edit/delete previous post but have now added the HDMI IN port to my new bouquet. Sorry for not doing more research earlier as the answer is in an earlier post on this page.

rfmoore

I have just created my first bouquet successfully using webif. Is it possible to add the HDMI IN port to the bouquet?

rfmoore

Any more news on logitech's update to their data base for their harmony remotes.

rfmoore

Thanks chaps or chapesses. I have solved the problem it was fingeg trouble . I now have audio with my copied TS files.

rfmoore

I recorded "The girl with the dragon tattoo" on my T4 the other night. Today I copied it to a usb stick and 6 files with the following extensions were copied .eit .MEPEG-2 TS Video .AP .CUTS .META and .Sc When I selected the .MEPEG-2 TS Video file using Windows Media Player or VLC on my PC...

rfmoore

I'm in Adelaide. Yes LCN 2 and 21..

rfmoore

I am no longer receiving ABC Lcn 20 or 21 EPG information on my T4 ICE TV EPG. Is any one else ihaving the same problem? My last update was 2016-01-01 from the Beta site. I am operating front panel i

rfmoore

Neither my Topfield nor beyonwiz usb adapters worked initially. I was using the wrong encryption for my key type ascii instead of hex. Both adapters work now.

rfmoore

I've done so using a Crome cast and splitter to the HDMI input port.

See whirlpool forum starting on page 16
http://forums.whirlpool.net.au/forum-re ... 16205&p=16

I've also done it by connecting my Sony blue ray media box via the HDMI splitter to the T4.

rfmoore

As Mr Quade has surmised I think data was being dropped as I'v changed to a billion wireless router I had hanging around the house and although the bit rate and other properties are the same as the negear router I can now get iView and you tube with no problems. The streaming problems between the T4...

rfmoore

54 Mb/s strength 50 dBm link Quality 96 to 100/100

rfmoore

I can't receive Iview via HBBtv. I can receive ABC. I can stream videos from my PC to my T4 via my wireless connection but when I stream recordings from my T4 to my PC and IPad they suffer badly from buffering. The buffering problem also occurs with WizOz. I am connected to my modem/router, PC and I...

rfmoore

Sorry for taking so long to reply. On re reading my post and having spent some more time playing around with both my PC and T4 and reading some more posts I have managed to mount my public folder and also view my PC videos via the DLNA system. However I still have one problem which I can't solve due...

rfmoore

Your correct I can't see the two directories on my my PC. I was able to see the T4 on my PC network previously. The T4 has a fixed IP address. I can ping the T4 packets were sent and received. I have restarted the access pont. Still no change.

Search found 60 matches

About the Forum

Join us