I'm using the Matt Huisman add-on on the V2 for Kayo.
I've never looked at Telstra TV, I wasn't aware you can buy it outright.
May be a better option than Kayo on the V2!
Search found 175 matches
- Fri Aug 02, 2019 16:51
- Forum: Kodi Plugin
- Topic: Kayo Sports plugin
- Replies: 10
- Views: 2614
- Fri Aug 02, 2019 16:28
- Forum: Kodi Plugin
- Topic: Kayo Sports plugin
- Replies: 10
- Views: 2614
Re: Kayo Sports plugin
If I still have a copy of that file stored somewhere I will try to install it on my V2 and see what happens. That would be great if you still have it. I am on the Telstra Rewards 3 month Kayo trial. If Kayo liveview doesn't work without the plugin it is probably useless to me then. I was hoping to ...
- Fri Aug 02, 2019 13:55
- Forum: Kodi Plugin
- Topic: Kayo Sports plugin
- Replies: 10
- Views: 2614
Re: Kayo Sports plugin
MrQuade, I have successfully installed Kodi and that works fine, albeit only version 17.6 Krypton. The Kayo Sports plugin is installed and Kayo is sort of ok! I can play anything on the Kayo catchup, but live view is a no go due to the "inputstreamadaptive" plugin not installing due to thi...
- Mon Jun 17, 2019 15:44
- Forum: General Topics V2
- Topic: Working through the night to get the pre-orders out
- Replies: 15
- Views: 2132
Re: Working through the night to get the pre-orders out
I ordered on the 5th of June, I assume that's not pre-order?
If not when is the next lot likely to be sent out?
If not when is the next lot likely to be sent out?
- Sun Sep 10, 2017 17:02
- Forum: Hardware Discussion
- Topic: New T2, no sound from S/PDIF port.
- Replies: 10
- Views: 1825
Re: New T2, no sound from S/PDIF port.
An update, received a new T2 from Beyonwiz, sound is all ok, so faulty unit sent back. By the way, fantastic service from Beyonwiz.
- Mon Aug 28, 2017 06:00
- Forum: Hardware Discussion
- Topic: New T2, no sound from S/PDIF port.
- Replies: 10
- Views: 1825
Re: New T2, no sound from S/PDIF port.
I don't have a T2. My T4 is dead so I don't have a Beyonwiz T Series connected to my home theater amplifier but I seem to remember that enabling the downmix options may have disabled the optical output. Just to be sure, I did just verify that with my T4 and optical connection to my amp. Did the sam...
- Sat Aug 26, 2017 18:07
- Forum: Hardware Discussion
- Topic: New T2, no sound from S/PDIF port.
- Replies: 10
- Views: 1825
Re: New T2, no sound from S/PDIF port.
It's a LG 5.1ch 3D Blu-ray Home Theatre System, have no problem with any other device connected to it, Foxtel, T4 and once the T3 (until it went belly up!) and Apple TV. I can see the red glow if I open the flap on the port. The user having the issue you don't know if he found a solution or was it a...
- Sat Aug 26, 2017 16:39
- Forum: Hardware Discussion
- Topic: New T2, no sound from S/PDIF port.
- Replies: 10
- Views: 1825
New T2, no sound from S/PDIF port.
Have just received a new barebones T2 today to replace my dead T3. Set it all up, everything is OK other than I get no sound from the S/PDIF port. Tried different cable, no go. Cable is fine from my T4, so it is not a cable problem. Before I send this thing back has anyone got anything that I may ha...
- Mon Aug 21, 2017 08:19
- Forum: General Topics
- Topic: T3 stuck on displaying Beyonwiz T3
- Replies: 306
- Views: 52913
Re: T3 stuck on displaying Beyonwiz T3
Thanks for that, might be the way to go then.
- Mon Aug 21, 2017 07:51
- Forum: General Topics
- Topic: T3 stuck on displaying Beyonwiz T3
- Replies: 306
- Views: 52913
Re: T3 stuck on displaying Beyonwiz T3
My T3 has now decided it doesn't want to play with me anymore and has the "Beyonwiz T3" displayed. Lasted 3 years! I still have my T4, may just bin the T3 and get a T2 barebones as our secondary recorder. Have a 2.5" drive floating around. What approximately is the cost to repair the ...
- Sun Sep 04, 2016 16:27
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
Re: T4 Tuner Issue
You never disappoint! loltezza007 wrote:Your avatar says otherwiseFester1952 wrote:275,000 volts never got to me, thankfully!
- Sun Sep 04, 2016 08:00
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
Re: T4 Tuner Issue
Hi Fester1952, EDIT: IMPORTANT: Do not change the fan orientation without being aware of all the physical and electrical considerations. To do so can result in electrical shock and destruction of the fan. If moderators permit this post I will provide a few extra details about the task. Regards, Ian...
- Sat Sep 03, 2016 08:06
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
Re: T4 Tuner Issue
Hi Fester1952, Ventilation is good and fan is set to auto, never touched it actually. In my opinion the fan should be set to ON. Regards, Ian. It appears that temperature when in standby with the fan in auto may be the problem Ian. Setting it to on I tried to replicate my tuner issue and can't get ...
- Fri Sep 02, 2016 08:29
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
Re: T4 Tuner Issue
Hi Fester1952, Ventilation is good and fan is set to auto, never touched it actually. In my opinion the fan should be set to ON. In AUTO mode the fan is ON when the unit is running and OFF in STANDBY and DEEP STANDBY. When the unit is in STANDBY most of the internal devices are still powered up so ...
- Thu Sep 01, 2016 19:05
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
Re: T4 Tuner Issue
A reboot brings all tuners back on again. Does anyone have any idea why this would be happening? Hmm, not really. I haven't heard of that ever happening. How's the ventilation on your T4? Open cabinet, and haven't changed any fan settings? The was a problem with the drivers in a much earlier versio...
- Thu Sep 01, 2016 18:51
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
Re: T4 Tuner Issue
... sometimes I am getting zero length recordings, I know why, a random tuner would go down. It is not a specific tuner, just any random tuner. ... How are you testing for the missing tuner? Pete, I go to setup/tuners/tuner allocation/preferred tuner I then select each tuner in turn then to a chann...
- Thu Sep 01, 2016 07:08
- Forum: General Topics
- Topic: T4 Tuner Issue
- Replies: 16
- Views: 1925
T4 Tuner Issue
I have had an issue with my T4 for many months now. What is happening is sometimes I am getting zero length recordings, I know why, a random tuner would go down. It is not a specific tuner, just any random tuner. A reboot brings all tuners back on again. Does anyone have any idea why this would be h...
- Mon Apr 25, 2016 10:10
- Forum: Plugins
- Topic: Series2Folder plugin
- Replies: 388
- Views: 84746
Re: Series2Folder plugin
Slightly longer answer. (The feature has been requested)
Thank's MrQuade, hope it is implemented, love the plugin.
Thank's MrQuade, hope it is implemented, love the plugin.
- Sun Apr 24, 2016 17:17
- Forum: Plugins
- Topic: Series2Folder plugin
- Replies: 388
- Views: 84746
Re: Series2Folder plugin
Is there anyway to see how many files are in the folders created by Series2Folder? I have 30 folders and I have no idea which ones contain unwatched programs or ones that are empty, other than to go into the folders.
- Tue Feb 16, 2016 05:54
- Forum: General Discussion
- Topic: Banned?
- Replies: 5
- Views: 1523
Re: Banned?
Same thing happened to me, Bigpond, but after awhile all came good.
My IP hasn't changed for months.
Maybe it happened to everyone but just that those who were logging in at the time
noticed it.
My IP hasn't changed for months.
Maybe it happened to everyone but just that those who were logging in at the time
noticed it.
- Mon Feb 15, 2016 14:27
- Forum: Hardware Discussion
- Topic: T4 Picture Pixelation
- Replies: 4
- Views: 994
Re: T4 Picture Pixelation
Alternatively, if the signal strength shows a strong signal, and you are perhaps already using a powered splitter, you may have overamplified the signal. Other than that, I have no further suggestions. All tuners are showing good signal strength and I'm not using any powered splitter. It may be a f...
- Mon Feb 15, 2016 07:31
- Forum: Hardware Discussion
- Topic: T4 Picture Pixelation
- Replies: 4
- Views: 994
T4 Picture Pixelation
Since new I have experienced pixelation on my T4 every few minutes, not bad but just annoying, but we have put up with it. In the same cabinet is my T3 which does not suffer with this issue and neither does the Samsung TV, so I know it is not the antenna system. The wife is now whinging about it so ...
- Wed Dec 09, 2015 09:04
- Forum: General Topics
- Topic: Reception Quality
- Replies: 13
- Views: 1622
Re: Reception Quality
I have both a T4 and T3, both off the same antenna. T3 no problems but the T4 at times I get pixelation.
- Sat Nov 28, 2015 16:14
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
Someone told me that you get bombarded with email adverts, is that fact?simoncasey wrote:You can still keep a free icetv account
- Sat Nov 28, 2015 12:51
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
I have now decided to drop my IceTV account and go autotimers. I must say I can quite comfortably live with autotimers, over the last week I have been using it I have not missed any recordings and even filtered out the repeats. It is much better than I had anticipated. Probably the thing I will miss...
- Sat Oct 17, 2015 05:47
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
My RT-AC68U supports OpenVPN with standard firmware check with your model as you shouldn't need Merlin firmware. I see the Asus official firmware now supports OpenVPN, it never used to, but I have used Merlin firmware and DD-WRT firmware for a long time and OpenVPN was not integral on the Asus rout...
- Sat Oct 17, 2015 05:40
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
Do you guys set up a VPN through something like OpenVPN, or use a VPN service, or write some arcane code of your own? I use DYNDNS through my Asus RT-AC87U router. Asus have their own, never tried it though, had a DYNDNS account for ages. The router is capable of OpenVPN if you use the Merlin firmw...
- Fri Oct 16, 2015 12:30
- Forum: Ice TV
- Topic: Vale IceTV
- Replies: 15
- Views: 2960
Re: Vale IceTV
Vale IceTV
It's risen from the dead Tezza!
It's risen from the dead Tezza!
- Fri Oct 16, 2015 11:26
- Forum: Ice TV
- Topic: IceTV back!
- Replies: 48
- Views: 5965
Re: IceTV back!
Just when i got my head around Autotimers!
- Fri Oct 16, 2015 10:55
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
Do you guys set up a VPN through something like OpenVPN, or use a VPN service, or write some arcane code of your own? I use DYNDNS through my Asus RT-AC87U router. Asus have their own, never tried it though, had a DYNDNS account for ages. The router is capable of OpenVPN if you use the Merlin firmw...
- Fri Oct 16, 2015 06:44
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
It's definitely a good trick and can be done easily with just the PVR, but the VPN solution does have one advantage, in being a lot easier to initiate a connection from a phone/tablet. Yep, I much prefer a VPN as I have several security cameras that I access from my iPad when away plus a few other ...
- Wed Oct 14, 2015 08:47
- Forum: Ice TV
- Topic: Alternatives to iceTV..?
- Replies: 98
- Views: 11099
Re: Alternatives to iceTV..?
A post from Whirlpool mentioned community based EPG service like this one http://www.oztivo.net/xmltv/
Is it at all possible to incorporate this data into the Wiz EPG or extract the data via a plugin?
Is it at all possible to incorporate this data into the Wiz EPG or extract the data via a plugin?
- Mon Oct 12, 2015 14:29
- Forum: Ice TV
- Topic: Say Yes For IceTV to Continue
- Replies: 28
- Views: 4005
Re: Say Yes For IceTV to Continue
I would probably consider it IF I hadn't paid up until the end of 2019, admittedly at a discounted rate, so I'm basically around $200 in the red. Just would leave a sour taste in my mouth to have to pay all over again at the full rate. I will certainly miss the service but I got burnt in the Solarsh...
- Mon Oct 12, 2015 14:13
- Forum: Ice TV
- Topic: Say Yes For IceTV to Continue
- Replies: 28
- Views: 4005
Re: Unhooking from IceTV and setting up auto timers.
I assume you have all got the email: Dear IceTV subscribers, We, Amanda Lott and Tim Heesh were appointed Voluntary Administrators of the Company on 6 October 2015. The following request has been written by the Director to the company Mr Colin O'Brien. We as administrators have continued to maintain...
- Mon Oct 12, 2015 12:42
- Forum: Ice TV
- Topic: Unhooking from IceTV and setting up auto timers.
- Replies: 62
- Views: 9192
Re: Unhooking from IceTV and setting up auto timers.
Oi, enough of that young fella!tezza007 wrote:
There's a lot of retired, old farts on here.
- Mon Oct 12, 2015 06:26
- Forum: Ice TV
- Topic: Alternatives to iceTV..?
- Replies: 98
- Views: 11099
Re: Alternatives to iceTV..?
IceTv is under administration and very likely to cease trading and providing services very soon. If that does happen I am going to have to scrub up on Autotimers pretty quick. I have never used them, never found the need with IceTV. Had it for many, many years and found it solidly suited my needs, ...
- Fri Oct 02, 2015 16:10
- Forum: Skins
- Topic: OverlayHD Skin...
- Replies: 1013
- Views: 126744
Re: OverlayHD Skin...
Hi IanSav I had a problem last evening. Was using OverlayHD Skin as my skin for the T3 and wanted to change something not associated with the skin. Went Menu>setup and found that everything in the setup was blank. I had the same issue, had to go "Setup" then right over to the left to &quo...
- Sun Aug 30, 2015 21:56
- Forum: Ice TV
- Topic: Anyone seeing Ice TV EPG fill issues atm?
- Replies: 28
- Views: 3820
Re: Anyone seeing Ice TV EPG fill issues atm?
Me neither.prl wrote:Not me.Flash_Gordon wrote:... Many more getting this on their T4?
- Sun Aug 30, 2015 20:18
- Forum: Beyonwiz WizOS Apple / Android Apps
- Topic: Beyonwiz WizOS Apps Now Available on Google and Apple Stores
- Replies: 39
- Views: 9523
Re: Beyonwiz WizOS Apps Now Available on Google and Apple St
Well done everyone, just gave the iOS app a run and love it.
- Fri Aug 28, 2015 10:21
- Forum: Networking
- Topic: Deleted mountpoints remain in sources
- Replies: 19
- Views: 3130
Re: Deleted mountpoints remain in sources
Not me, I did revert to the original when I was having the channel scan issues, but have since installed the latest beta and all is good.prl wrote:Are both of you running the original firmware for the T4?
- Fri Aug 28, 2015 10:08
- Forum: Networking
- Topic: Deleted mountpoints remain in sources
- Replies: 19
- Views: 3130
Re: Deleted mountpoints remain in sources
Neither did I actually, but Beyonwiz sent me the link to download it myself.MrAstro wrote:Definitely not... - just my luck.
I assume it is OK to post it here:
https://dl.dropboxusercontent.com/u/706 ... mplete.zip
- Fri Aug 28, 2015 06:40
- Forum: Networking
- Topic: Deleted mountpoints remain in sources
- Replies: 19
- Views: 3130
Re: Deleted mountpoints remain in sources
That is what I had to do, from USB, and the redundant mounts in "sources" are now gone.MrAstro wrote:I wonder if a firmware upgrade will let me start with a clean machine...
- Tue Aug 25, 2015 13:37
- Forum: Networking
- Topic: Deleted mountpoints remain in sources
- Replies: 19
- Views: 3130
Re: Deleted mountpoints remain in sources
Some more information about the mount method (Autofs/FSTAB/...) would also be useful in both cases. It would save a bit of guesswork by anyone trying to replicate the problem. I was trying different mount methods as the streaming from my T3 to my T4 was pretty woeful. I did try several methods to s...
- Sun Aug 23, 2015 13:52
- Forum: Networking
- Topic: Deleted mountpoints remain in sources
- Replies: 19
- Views: 3130
Deleted mountpoints remain in sources
I have a couple of deleted mountpoints but they remain in the T4 sources menu. How do you get rid of them as they are redundant? I have tried a reboot and a network restart but they won't go away.
- Mon Aug 10, 2015 07:49
- Forum: General Topics
- Topic: Playback glitches with T4
- Replies: 13
- Views: 1993
Re: Playback glitches with T4
I see picture breakup every now and then. Picture pixelates for a part second every now and then. I have seen this on T3 but it's more often on T 4. I have never seen it on my T3 but it does happen on the T4. I know in my case it has nothing to do with reception as I have swapped the T3 and T4 coax...
- Tue Jul 28, 2015 12:17
- Forum: General Topics
- Topic: Star shaped icon rotating
- Replies: 12
- Views: 1551
Re: Star shaped icon rotating
However, if it is just an unavoidable consequence of some feature or settings you need, then you can optionally turn off the spinner entirely. MrQuade, where is the setting to turn it off? The T4 is not unresponsive when the spinner is occurring, it's just annoying thats all. EDIT ... It's Ok, foun...
- Tue Jul 28, 2015 08:13
- Forum: General Topics
- Topic: Star shaped icon rotating
- Replies: 12
- Views: 1551
Re: Star shaped icon rotating
I rarely see it on the T3 but a lot on the T4, especially streaming from my NAS. NAS>T3 .. never, NAS>T4 .. lots
- Fri Jul 24, 2015 17:27
- Forum: General Topics
- Topic: T4 HDMI input recording.
- Replies: 165
- Views: 18721
Re: T4 HDMI input recording.
I would say as good as the Foxtel recordings.Ukind wrote: Yes I got the same one. I may have to check my foxtel output settings. I didn't even think about the cables. How good are your recordings?
- Fri Jul 24, 2015 13:21
- Forum: General Topics
- Topic: T4 HDMI input recording.
- Replies: 165
- Views: 18721
Re: T4 HDMI input recording.
Got a splitter and it recorded Foxtel but when I played it back the file seemed to be not as good as the live feed. I am guessing that it was dropping frames. Is there a way to overcome this? My recordings are very good, did you get the eBay splitter? I also read on a forum to get 1.4 HDMI complian...