Beyonwiz Australia

grampus

It also has only a setup for a single PVR, unlike the old Beyonwiz app that allowed you to save several setups and switch between them. I have 2 devices, and can stream from either, just by changing the IP address on VUplus I don't normally replay my recordings, but just switch channels. and watch ...

grampus

To avoid any crash from bad messages already in the IceTV log, I recommend restarting your Beyonwiz at a convenient time. A GUI restart will do, but a complete restart will also work. That will clear the IceTV log.

Done
Thanks

grampus

where and how do we get this fixed s/w, When will it be available?
I'm assuming that it will be an updated plugin.

tks

grampus

FWIW
crash on my U4 Only noticed it a day or so ago.
My T3 doesn't crash
Both boxes have Ice version 20201118
S/w vers 19.3 20210901
both Updated via USB 2/9/2021
Using Melbourne EPG.

grampus

Peter wrote But I occasionally get IceTV login failures for reasons that I can't explain. Peter I'll just throw a few extras in here. I have both a T3 and a U4, But only the U4 will show this symptom I have been doing online updates for the last few months. On each occasion after the save settings, ...

grampus

grampus

Tks Peter, Yes. I believe you are correct. As I said I think all academic. No errors reported since Ice support responded with a thought that it was an internal error, or at least that they way I would like to read it Looking at our logs this looks like a weird error where the beyonwiz is updating t...

grampus

tks,
I generally wait until a USB update is available.
Sometimes swing both ways.

grampus

Since a reboot this morning I have had about 5 automatic fetches with no errors.

grampus

Although I have rebooted, and found that a fetch from Ice worked fine this time,

But I will still attach logs
Probably academic

Enigma2-1970-01-01_10-00-35.log: (53.98 KiB) Downloaded 79 times

enigma2_execution.log: (111 Bytes) Downloaded 88 times

grampus

This may be a bit long winded. Apologies Attachment from U4 Ice log I have been getting error reports on each scheduled or unscheduled fetch. The file is the latest from the Ice log. I was getting all the errors shown but was unable to recover. I have 2 devices a T3 and a U4 currently the U4 is show...

grampus

Sub folders working
Tks

grampus

grampus

a question re installation if i may
procedure i have followed
remove distinguished plugin
Install new plugin
go to descriptor menu
turn off first option
press green
so no to renew epg.
then switch on first option
press green
say yes to renew epg

is there a need to restart the gui at any stage.?

grampus

I assume it’s probably worth while removing the plug in.
just in case it has some detrimental effects.
Go back to a previous version (?) that will still give the more detailed descriptions.

or maybe i’ve missed the point completely.

grampus

Great, thanks for the effort.
both U4 T3 updated.
hope to see results overnight.

grampus

I was, yes (your avatar was apt ).

ah yes, i’ve also been watching the cricket.

grampus

looking back, you may be waiting for me to respond to the detail at the lower file level. (.ts.) if that’s so, I only wish to see it all at a higher level My druthers are that Series to folder will have a facility to pick up the season and episode as a name that it will recognise to allow me to have...

grampus

I'm back.

grampus

After digesting all that, I think my results reflect what you say.
Pity, I would have liked to see the season being lifted from the detail, and becoming part of the file name.
FWIW, it’s till an improvement on was available prior to this feature.

Tks for the info.

grampus

Wish i could have said tha.

But now seriously,
happy with the logic.
Setting a timer from EPG. Green button. gives me what i see as a desired result.
think i have to wait now for timers that haven’t bee sent to show a similar result.

Wait an see

grampus

tks again, i’ll have run at it tomorrow

grampus

I feel embarrassed to keep on it’s this. But, my expectation was that after following the procedure., i would see file names with series/ep displayed when going into Media. but none of my new recordings showed any evidence of season/episode on any of my recordings. just for more complete information...

grampus

grampus

I’m finding a bit of a problem understanding that I’m afraid. I wouldn’t mind if you could just tell me which options i need to achieve the maximum result. e.g. actors, directors to the description and have separate file names for season episode eg 1, 2 on, 3 off,4 on. then what is my next move? all...

grampus

PS
I like the reset the EPG prompt
nice for a GOF like me to be told.

grampus

I am confused reading the 4 options available. My needs are to have the recorded file name have the season/info as the name with the hope it will be suitable for Tks.series to folder to have separate directories for the different seasons. The prompt shown for the bottom option leaves me confused. Wh...

grampus

Even doing this won't change the titles of any existing timers, and hence their recording titles and filenames.

Think I expected that.
It should be an interesting journey
Keep me off the streets for a while.

grampus

Installed v1.0.6.6 on U4 and T3 at first pass it does what I hoped for. Just now to wait to see how this goes with series to folder. v.1.0.6.6 The Add season to title option seems to be working in reverse. When disabled I get - House Hunters (Season 167) When enabled I get - House Hunters . This abe...

grampus

My original thought was Great, hopefully there would be a way of picking up different series and placing them in separate folders with the series to folder option. I watch quite a few multi series shows that tend to confuse if you just watch then in date order. Law and Order, NCIS, Silent Witness, B...

grampus

grampus

I am happy to see all the season/episode year info that has become available. But I am a mite confused as to the config item "add season/episode number to recording name." My assumption is that I would see something like (NCIS Season X Episode Y) (Yesterday Date) in the listing I don't hav...

grampus

test again

grampus

liking the new product improvement.
Thanks guys.

grampus

Yay got fixed

grampus

just a test to see if I'm still blocked

grampus

Hope this doesn’t send you guys off in the wrong direction, But Was having a problem on both my devices that required me to renter my Icetv password. it seemed that the password field was being cleared. however this all was resolved for a day or so. when it would appear again. I raised a problem rep...

grampus

Thanks.
ill see if I ca start a dialogue.

grampus

quite regularly either one or both my devices lose touch with the Ice server when update and download scheduled. And the Ice logs shows the errors below. When going to the ice login entry, I find that the password field is cleared and is blank The fix is just to go down to the login screen and enter...

grampus

I think my avatar says it all.

grampus

Yes,
Like I said silly me
couldn’t see the woods for the trees.

grampus

Its my AHA moment
Silly me.
Fixed my problem.

Thanks for persevering

grampus

I had checked that. It is set to yes
Tried toggling it to no and back again
After the no all directories showed no count,
After the yes
All except the errant one displayed correctly.

Like I say its no big deal.
Just thought it might give someone an AHA moment.

grampus

Can anyone make a comment on a limit to how many entries can be shown as a directory count. E.G. I have a number of directories with 2 - 3 shows, with the number count shown on the right side of the directory I have one directory that has currently 139 files yet the media list just gives Show name &...

grampus

Sorry, didn't make it clear did I?
Apologies
The auth setting I was talking about is in the Gigablue app
I didn't do anything on the BW. to allow access
Just a matter of determining the BW IP address and configuring that in the settings in the APP
Everything else was default.

I

grampus

I use GigaBlue
Although I dont recall asked for a password
It may be worth your while to go through the settings
Ensure Enable authentication is turned off.
Although, I tried turning it on, wasn't asked for a password, but was unable to connect. Turned it off again and was able to connect

grampus

Both my T3 and U4 have been fetching OK for a full log's worth

grampus

Just a follow up to my post re this sort of issue. I also have had a number of problems with U4 splitting recordings. This has disappeared, and not returned. Last action taken some months ago was to reinstall from scratch after initialization, and without Dir-count and series to folder. The indicati...

grampus

Sir Lancelot wrote: ↑ Thu Apr 18, 2019 9:46 am splitting recordings into multiple pieces. I tried all avenues to get rid of that problem but without luck, so I packed it up and shoved it in a cupboard. I also have had a number of problems with U4 splitting recordings. This has disappeared, and not ...

Search found 1428 matches

About the Forum

Join us