Beyonwiz Australia

NigelSenior

Hi Folks, moving to new house soon and this will likely involve expanding to be a two TV household. Wife would like to access existing T2 from both. Both Tvs will be Android. First TV will be direct. Second TV as follows 1. Setup share on T2 2. Map to share from second TV 3. Use KODI or other media ...

NigelSenior

Thanks for the assistance folks

Cheers

Nigel

NigelSenior

... There are 2 files that are meant to be synced autotimers.xml on disk and the same in the flash cache ... No, there is only one file, in the filesystem on the flash partition that holds the firmware, specifically in /etc/enigma2/autotimer.xml. The other copy is in the main memory in the data spa...

NigelSenior

... There are 2 files that are meant to be synced autotimers.xml on disk and the same in the flash cache ... No, there is only one file, in the filesystem on the flash partition that holds the firmware, specifically in /etc/enigma2/autotimer.xml. The other copy is in the main memory in the data spa...

NigelSenior

MrQuade wrote:
NigelSenior wrote: Yes full reboot, typically software shutdown but sometimes flipping the switch.
You do the switch *after* the software shutdown completes I hope you mean?

I try to mostly

NigelSenior

MrQuade wrote:How are you rebooting the T2 (in case it makes a difference)? Via the GUI menu, or the OpenWebIf?
I assume you also mean a full reboot and not just a GUI restart?

Yes full reboot, typically software shutdown but sometimes flipping the switch.

NigelSenior

... I put a reg expression in the filter and maybe the characters were not good at playing with the XML. That seems unlikely to me. The firmware uses a standard Python module for reading and writing the XML, and I imagine it would be very well tested, both by its developers and in use. The challeng...

NigelSenior

... Thanks Grumoy, As per my post above i have autotimers up to judging amy (wife). Then i put in ncis just to see if it stays. Cheched web site and ncis is still there. Checked xml and does not include ncis. Xml btw was updated at 4pm today, i would have though it would only be parsed to read. Mak...

NigelSenior

... Update here, having reentered my autotimers they have justt disappeared again at the same spot. May raise this as a new issuw In your browser, open ftp://root:none@beyonwizt2/etc/enigma2. Then open "autotimer.xml" in the browser. Does it look well formed? Count to the 12th "timer...

NigelSenior

May raise this as a new issuw I wouldn't worry about raising a new issue, you seem to be suffering from the same/similar issues here, and it appears to be unique to your unit. Have you rebooted the Wiz recently? Give it a try if not. I'm not sure what is happening, but it appears like the Wiz is re...

NigelSenior

Got to the bottom of this, or sort of. I checked the bw on the tv and the timers were missing there too. I put the missing ones back in and a few of them doubled up suggesting they were already there but hidden. My guess is a corrupted file. All good for now anyway so thanks for the feedback. Cheer...

NigelSenior

Got to the bottom of this, or sort of. I checked the bw on the tv and the timers were missing there too. I put the missing ones back in and a few of them doubled up suggesting they were already there but hidden. My guess is a corrupted file. All good for now anyway so thanks for the feedback. Cheers...

NigelSenior

Using chrome on android 4 I take your point regarding visability but if you look at the image above you will see the first show is selected and the border goes fully left to right and so there is no place for a slider. Unless i have the spot completely wrong is completely missing :) The slider is i...

NigelSenior

What tablet/software are you using? I just created 20 autotimers and they are showing up ok in both Chrome and Firefox on Android 6.0.1 on a nexus 7. Edit: hehe, it seems that it was just that my screen was a bit bigger. I created a few more and they didn't show up either. If you put your finger on...

NigelSenior

MrQuade wrote:It's possible that you just couldn't see the scrollbars on your tablet browser. Most mobile browsers I have used don't show any visible scroll controls since they are touch based interfaces.

I did notice a similar thing in the EPG.

Good idea thanks

but doesnt check out, see attachment

NigelSenior

Hi, Just noticed that for t2 when updating autotimers, the list of autotimetd seems to be limited to just the first 12. The autotimers still exist just are not displayed and hence cant be edited or deleted Oops another point here, from memory it was fine on a desktop, so this may onky be an issue on...

NigelSenior

Hi Folks,
Back on the forumn after many years - very nice

Finally just bought a refurbished T2 to replace my ageing S1 and was wondering if the T2 can play the legacy file format of the S1 as I have some investment in these.

Thanks in advance.

Cheers

Nigel

NigelSenior

simoncasey wrote:See what you can get with the icetv free service. It may well cover what you want.

Thanks that's a very good answer that I had not consisted.

NigelSenior

Hi Folks, have just decided that having already paid for the next three years that I cant really go for paying again and a more expoensive model to boot. Hope ICEtv goe okay but doesnt work for me now :) Was wondering though if anyone has a workable solution for using native guide etc. My ideal scen...

NigelSenior

+1 form me on this Warkus is great

cheers

Nigel

NigelSenior

Hi folks, Have an old S1 which mostly works well. Every now and then e.g. Once per week it does not start as gets stuck on hard disk spin. Not sure if its disk or power supply. I have tried the obvious power supply tests eg brightness and dvd open speed and they seem OK. Any suggestions welcome. Che...

NigelSenior

I've been dredging the forum and found fantastic information which has really helped me progress the integration of my home theatre system. I love the dependable results of YARDWiz, but I am trying to have recordings from a P1 and a P2 initiated automatically so I grabbed a copy of WizPCL (binary)....

NigelSenior

I can't install WizPlayer on a Win 7 64 bit PC, (It tells me it's not compatible with the version of Windows I'm running.....) but I downloaded the source and ran it raw from that, and it works fine :) Incidently, it doesn't seem to like running from a network share...) Love it! walkerz, well done ...

NigelSenior

Thanks, qmanol. Nicely tracked down! The next version of getWizPnP will write TS files using a single open/close, rather than successive appends. That should fix the problem. Hi Peter, not sure if this relevant to you discussion but a trick I learnt with wizplayer was the difficuilty of writing fil...

NigelSenior

So, since the wireless router got replaced, and I had to downgrade the encryption on the DP-S1 to WEP+MAC filtering, it also got around the wireless networking bug that caused corruption whenever I tried to stream anything off the beyonwiz - both WizFX and WizPlayer would fail after about 17 second...

NigelSenior

Folks, this sounds to me like a problem I had back here http://beyonwiz.com.au/phpbb2/viewtopic.php?t=4979&highlight=&sid=05e07bc6f4cfb77ebfda983ff8f23d63 Basically if i plugged a USB hub in it froze - quite repeatedly. Originally it only did it when there were 2 drives in the hub but eventu...

NigelSenior

Hi Nigel, Those are definitely new ones for me. Is it possible that you pressed the YELLOW button three times, thus cancelling the selection? (Perhaps not a deliberate press but maybe a button bounce.) If you are sure of your actions I'll keep an eye open for these in the future. Regards, Ian. ... ...

NigelSenior

Folks, could not find this in a search so thought worth mentioning. I have an S1 with latest firmware and have noticed a small bug during editing. Type 1 - has occured half a dozen times - click yellow to mark edit point, click popup to cut out the adds and get the wrong menu - instead of the edit m...

NigelSenior

Yes the wizPNP is enabled. Thanks I will contact the author Hi Folks, I got contacted on this issue and we resolved as follows. WizPlayer has 2 ways to identify a BW on the network. 1. Broadcast - which does not always work (hence socket error) 2. Favorites list allows fixed IP address entry - reco...

NigelSenior

Thanks folks for the directions - will have a look and see if Popcorn is for me or not.

cheers

Nigel

NigelSenior

Hi Folks, (apologies for the location of this post but there isnt really a correct spot). Have noticed that a few BW's alos have a popcorn and was wondering if I could solicit feedback on the device. I am naive to the Popcorn capability but would like to maybe use one for streaming from Internet etc...

NigelSenior

Looks good to me. cheers Nigel :D :D :D The suggestion or the revamped page ? :) NB: My renovations aren't finished yet. I think I'll move the notes items (Runs on, etc) to between the description and the links. There aren't many Requirements items filled in yet, either, even for my own contributio...

NigelSenior

Looks good to me.

cheers

Nigel

NigelSenior

OK so I have searched and read and searched and read many times over the last year trying to work out ways to watch recordings on my PC (would love to get them on my iPad but the only way that will happen is if I copy the files to the PC and stream from there). I have looked at Wizplayer (seems to ...

NigelSenior

dfp wrote:Just wondering if there are any tricks one could do to get this to install on a 64bit OS (In my case windows 7 64bit)

Hi dfp
someone has done this - try searching the forum - from memory they installed it and then moved the exe to the windows 32 bit directory.

cheers

Nigel

NigelSenior

Hi Nigel, Is the hub you were trying self powered? If not try a hub with it's own power supply. Make sure the power supply is big enough to provide sufficient power to each device attached to the hub. The Beyonwiz has *no* hope of delivering that much power to its USB interface. Regards, Ian. Hi ia...

NigelSenior

Hi, I have been using a WD elements 1TB for 9 months and its great but in the end I need more space. Bought same model in 1.5TB and again it seems good. Either one works fine on its own but when i connect them up with a hub I get ocassional freezing. In a few cases I can actually pull out the hub an...

NigelSenior

Howdy all, just in case it can and i just can't figure it out...... Is there any way to watch on your pc a program that the wiz is still recording?? I would absolutely love this as i could have sport playing in a small window whilst doing other things on the pc. Thanks Trent Hi Trent, Wizplayer doe...

NigelSenior

I am currently running a WD Elements 160gig 2.0 external harddrive on my P1 and it is awsome for watching various media. I have WD Elements 1GB and that works fine. You can get the 1.5GB for $159 from OW diesel, et al, I have been running 1 TB Elements for 9 months or so and is fantastic. Decided I...

NigelSenior

... Is it my imagination or is the throughput higher from WizFX if you download files in parallel? I haven't tried it, but it may be possible to get higher total throughput by running several WizPnP streams in parallel. Since the network transfer restrictions are a deliberate engineering device to ...

NigelSenior

Hi, found an interesting post a while back which showed how to setup some identity information on a USB drive device so windows can display it with a unique icon and name - this used autorun.ini from memory. I have just put a second USB drive on my S1 and was wondering if the BW linux had any simila...

NigelSenior

Hi Nigel, I deleted my posts that linked to the older version. I also edited your posts that quoted my post (to remove those links). Hi Dave, I have often been accused iof being a poor communicatior and I think this could be a good example. What i meant with all the chat above was. 1. I am really p...

NigelSenior

Dave
please see message just above (didnt quote you so thought you might not get alerted).

cheers

Nigel

NigelSenior

just in case I don't hear from him if anyone has a copy I can download please PM me. I have been a bit slack about sorting out hosting - its currently with Rod W who is sorting out some hosting space. on subversion for me. I have put a page on the wiz wiki ( http://www.openwiz.org/wiki/WizPlayer ) ...

NigelSenior

Just to clarify. If your project is available under an Open Source license and you use OpenWiz to host the source code, then you can also use OpenWiz to host the corresponding binary releases built from the source code hosted at OpenWiz. Or in other words, if OpenWiz is used for source, you will al...

NigelSenior

Hi, finally got around to start putting my software offerings on the wiki and after a slow start am getting there. I tried to upload my release package but size is too big (3MB). This made me wonder if Wiki is appropriate for release packages. As I don't really have my own hosting a public place to ...

NigelSenior

Hi all.. I have exported some short recordings from the news that I want to be able to play on PC but the format is HEADER.TVWIZ with 4 other files 0001 0002 0003 0004 ? the recording is only about 4 minutes long. Is there a program to convert this stuff so I can use Media player to play ? thanks f...

NigelSenior

I'd love to play the SD programmes on the PC, but I'm unsure how to run WizPlayer 1.0 I have VLC 1.0.0 installed, and Wizplayer correctly finds the BW and lists all the shows. When I try to Play Local, I just get an error for a missing trunc file. Cjf, this is a common problem on Vista and is easil...

NigelSenior

I am well aware the primary purpose of this app. Just the word "play local" says to me "play a tvwiz file locally off your PC" rather than "play off the Wiz". Or am I completely off the mark here? Sorry Tony did not mean to offend. Play local is as you say - play a twi...

Search found 129 matches

Networking T2 wife friendly folder

Re: Renamed Autotimers disappearing

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Renamed Autotimers disappearing

Re: Renamed Autotimers disappearing

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Re: Cant see all autotimers in webif

Renamed Autotimers disappearing

Can T2 play legacy files

Re: Life after ICE TV

Life after ICE TV

+1 form me on this Warkus is great

Startup failure

Re: WizPlayer and Windows 7

Re: Wizplayer app for Android?

Minor bug in 01.05.334

Re: Wizplayer gives "Socket Error # 10060" on New

To Popcorn or not ?

Re: Streaming videos from BW to PC revisited

Anyone recomend a good Hub

Re: Which external hard drive for the P1...?

Can BW identify USB device information

Quick question on the Wiki

Re: How Do I play recordings that I exported from HDD to USB

About the Forum

Search found 129 matches

About the Forum

Join us