Beyonwiz Australia

Mammoth

Trekhead I recomend you contact warkus who resolved all issues I was having and its still working well.
Just click on his name in the post and send him a message.

Mammoth

Thanks Peter I have my shared drives with fixed ip address

Mammoth

I have 7 shared hdd connected to my pc with all my media on them it's all my movies and music files

Mammoth

What would be the best way to set-up my Windows 7 so it worked better with the T3

Mammoth

I will be trying one or two this time but everything was fine the way I had it before just wouldn't list files sometimes or it would freeze up. I never had these problems with the DP P2 everything just worked... I don't really have any options when it comes to the server as this is the only pc I hav...

Mammoth

Now it's stuck on "Please wait while removing your network mount...."
I'm going to do a factory reset and start from scratch

Mammoth

simoncasey wrote:Delete the fstab mount and then reboot. Then add the autofs mount.

Thanks I have 8 mounts this will take some time.... whats the next step to try after that ?

Mammoth

fstab has made it worse I'm still trying to change it back as every time I change a mount it takes nearly 10 minutes before it responds again I've had to flick the switch a few times now as it just takes to long. Please is there anyway to shutdown safely when the T3 locks you out or dose it matter i...

Mammoth

Has anyone had a DP-P2 2T lose the front display and the ability to use the remote control ? I still get a channel but can't navigate

Thanks

Mammoth

Thanks will give it a try

Mammoth

There is another issue I'm having trouble with, the T3 locks up quite often with the spinning icon, there appears no way of resolving this. I have left it for over 10 minutes to see what would happen ended up having to flick the power switch which I hate doing wondering if I'm going to damaged the h...

Mammoth

peteru wrote:Try to avoid spaces in share names, both on the PC end and on the T3. Embedded spaces are a recipe for trouble.

Thanks have made changes to avoid spaces.

Mammoth

prl wrote:Are there any timers being set by IceTV on the T3? Press TIMER from live TV, and then look for "once" timers (no repeat symbol in the top left of the timer entry) that correspond to the programs IceTV should have set timers for.

Thanks for your help the problem is now resolved.

Mammoth

Two things spring to mind. Are you sending the timers to the correct PVR in IceTV? If you had your old PVR configured, you may have been setting the timers on that accidentally? Second, have you been looking in the EPG, or the timer list to see if the timers have been sent and set? Depending on the...

Mammoth

As far as I understand you have to mount each drive with its own share name
Good luck

Mammoth

Thanks I will double check the settings

Mammoth

I cant find out why
My Ice Tv subscription is set to my T3 and I have entered my account details, the log
tells me it is updating the timers and the EPG but I get nothing listed to recording.

Any suggestions welcome

Thanks

Mammoth

One other thing I didn't mention is with Windows 7 the Public folder needs to be set as a share in advanced sharing
Locate your Public folder, right click, select Sharing, select Advanced sharing, tick the box Share this folder, click Apply
The folder is then found by the T3 when mount is set up.

Mammoth

Thanks again

Mammoth

Thanks prl I don't really understand why but I have tried so many option and these actually work for me. I will play further later just looking forward to accessing my drive right now. I forgot to mention that I refreshed the share on my drives by clearing the advanced share and then activating it a...

Mammoth

Ok I think I understand what has to happen to mount shares correctly This is what I have done 1. PC - Right click on the drive you are sharing select "Sharing" look for Network Path write down everything i.e \\MAMOTH-PC\Movies A-Z "What ever is there all the back slashes, dashes what ...

Mammoth

Sorry no other networks
I have been playing around and managed to mount a shared USB HDD connected to my pc then accidentally deleted it.
When I tried to set it up again it didn't work ?
Still trying

Mammoth

This is a image of my Network & Sharing Center not sure why it says network 2 when I only have one network

Mammoth

There's a problem with your settings. Make sure that your workgroup, username, password, server share etc are all correct and the correct case. Also, is windows set up for public folder sharing in advanced sharing options or have you shared the folder specifically to certain users. Ie with your DP ...

Mammoth

No luck

Menu, Sources, Public
there is no folders or files listed

Media, Locations, Public
get a error message dose not exist

Mammoth

Thanks I checked the setting again and I have made 1 correction to Workgroup changed it to upercase These are my setting now Mount using - fstab Active - On Local share name - Public Mount type - CIFS Server IP - 10.0.0.8 Server share - Public Use as HDD replacement - Off Mount options - rw,utf8 &qu...

Mammoth

So I changed to fstab and rebooted
the Sources have no listing of it and it's not list through media, locations
It is still there under Mount manager

Mammoth

simoncasey wrote:
Mammoth wrote:Thanks I have made the changes and tried again to access still nothing
By nothing, I assume that means you get the same error message?

Try changing the mount type to fstab and rebooting the T3

Ok will try
Thanks

Mammoth

Can I call it "PC public folder" or do you mean a more specific name i.e the computers name
And is Workgroup case sensitive because its listed in my network in upercase

Mammoth

Thanks I have made the changes and tried again to access still nothing

Mammoth

Thanks this is how I configured the mounts Mount using - AUTOFS Active - On Local share name - Public "This being the public folder on my pc Mount type - CIFS Server IP - 10.0.0.8 Server share - Public Use as HDD replacement - Off Mount options - rw,utf8 "Unchanged" Username - Guest &...

Mammoth

Some information about what you did to connect the T3 to the shares might be helpful to anyone trying to help. Sorry this is what I did to find shares Menu button, selected Setup, selected Network, selected Network Browser and then rescan if needed I then ended up with a list containing.... 10.0.0....

Mammoth

Same problem it seems there is a major problem with this issue as I have tried everything that has been suggested on several different forums to no avail. It seems odd that the network browser can see my network drive and computer but that's as far as I can go. If I try to expand the computer folder...

Mammoth

Mammoth wrote:
simoncasey wrote:Can you access your T3 from your PC - ie the other way around.[/quoteI
I have it listed in my Network and I was able to access it but not any more this is crazy

I have know idea whats going on just tried again to access T3 through my Network on my pc and its working again

Mammoth

[quote="simoncasey"]Can you access your T3 from your PC - ie the other way around.[/quoteI
I have it listed in my Network and I was able to access it but not any more this is crazy

Mammoth

When I try to access the mount through Source I get a blank page on the left

Mammoth

It tells me it's mounted but when you go to access the shear it say share not found. How are you accessing the shares when you get that error? Sorry don't follow you can you explain My bad through the media player select locations then select mount Do you get the same if you try to access through M...

Mammoth

Mammoth wrote:
simoncasey wrote:
Mammoth wrote: It tells me it's mounted but when you go to access the shear it say share not found.
How are you accessing the shares when you get that error?
Sorry don't follow you can you explain

My bad through the media player select locations then select mount

Mammoth

simoncasey wrote:
Mammoth wrote: It tells me it's mounted but when you go to access the shear it say share not found.
How are you accessing the shares when you get that error?

Sorry don't follow you can you explain

Mammoth

Mount Using: AUTOFS or FSTAB Active: On Local Share Name: What you want to call the share on the T3 Mount Type: CIFS Share Server IP: The IP address of your PC Server Share: the name of the share on the PC use as HDD replacement: Off Mount Options: Leave as is Username & password: whatever you ...

Mammoth

Mount Using: AUTOFS or FSTAB Active: On Local Share Name: What you want to call the share on the T3 Mount Type: CIFS Share Server IP: The IP address of your PC Server Share: the name of the share on the PC use as HDD replacement: Off Mount Options: Leave as is Username & password: whatever you ...

Mammoth

Have you tried setting up the mount to your pc manually, including the username and password settings that are on the second page? The network browser doesn't always work, and password protected sharing is only one of the reasons it wont. I have tried to do a mount manually not really sure if I'm u...

Mammoth

simoncasey wrote:Sorry to be pedantic, but just to confirm, you mean password protected sharing in the advanced sharing options is turned off, and not just that you don't have passwords on your shares or on your PC.

Sorry yes thats right

Mammoth

Windows 7 has an option called password protected sharing. This means that you have to have an account on the PC even to browse the shares. The problem with the t3 is that the network browser doesn't prompt for a username and password so you can't browse using that option. That feature didn't exist...

Mammoth

Previous DP P2 user now have the T3 which I'm finding it very difficult to locate all my locally shared drives and files. I have been through this forum and still cant find any way to do this. If anyone has managed to achieve this some advise would be great. Thanks The other thing I'm having a prob...

Mammoth

Previous DP P2 user now have the T3 which I'm finding it very difficult to locate all my locally shared drives and files. I have been through this forum and still cant find any way to do this. If anyone has managed to achieve this some advise would be great. Thanks The other thing I'm having a probl...

Mammoth

Yes full file structure of the dvd but I play the vob's because of problems I have encountered
with iso and dvd's were the playback looses sound. It sound like I should give iso another try with this firmware.

Thanks

Mammoth

Mammoth

Thanks for the all advice I will have a play and see what happens.

Cheers

Mammoth

Mammoth

Thanks but its not restricted to just one or two dvds it happens to all of my collection that's why I tend to think it might be a firmware issue. I didn't have this problem with the last firmware only other problems transferring files which is why I updated. Do you know if its possible to go back to...

Search found 70 matches

About the Forum

Join us