Request for updates for channel picons
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
From its Wikipedia entry, it appears that 7flix will launch on the Sunshine Coast as well as the state capitals (other than Hobart). The entry for Ten HD only mentions Sydney, Melbourne, Brisbane, Adelaide and Perth, but dRdoS7's Geelong data also has Ten HD in it.
Could someone on Sunshine Coast try a rescan and post the getservices.xml file if it has either 7flix or Ten HD in it? Some of the other near-capital centres like Newcastle & the Gold Coast may also be getting one or the other of them. I think Wollongong is too "regional" to be in the rollout.
Could someone on Sunshine Coast try a rescan and post the getservices.xml file if it has either 7flix or Ten HD in it? Some of the other near-capital centres like Newcastle & the Gold Coast may also be getting one or the other of them. I think Wollongong is too "regional" to be in the rollout.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Apprentice
- Posts: 66
- Joined: Fri Oct 09, 2015 00:27
- Location: Sunshine Coast QLD - Bald Knob Transmitters
Re: Request for updates for channel picons
Sunshine Coast re-scan stuff.
Thanks.
Thanks.
Beyonwiz T2 X 2
Linden 65” UHD LED LCD TV
Linden 65” UHD LED LCD TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Got it. Thanks.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Win has announced the commencement of WIN HD and 9Life on 1 Mar. Except, for the convenience of WA viewers, where it will be "a few days" later.
I'll start collecting data for the regionals affected as soon as people start rescanning.
Mac37, I'm afraid you count as both a regional and a metro for this, so I'll need another Sunshine Coast scan to cover WIN properly for you
I'll start collecting data for the regionals affected as soon as people start rescanning.
Mac37, I'm afraid you count as both a regional and a metro for this, so I'll need another Sunshine Coast scan to cover WIN properly for you
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
Hi,
dRdoS7
Geelong is a re-transmission of Melbourne.prl wrote:From its Wikipedia entry, it appears that 7flix will launch on the Sunshine Coast as well as the state capitals (other than Hobart). The entry for Ten HD only mentions Sydney, Melbourne, Brisbane, Adelaide and Perth, but dRdoS7's Geelong data also has Ten HD in it.
dRdoS7
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
I have submitted the TEN HD and 7flix picon data for Adelaide, Brisbane, Geelong, Melbourne, Perth, Sunshine Coast and Sydney to the repository.
I don't have the required data for some regionals (e.g. some of the STQ stations in Queensland) that will be getting 7flix. Data for that may filter through later when I start getting updates for WIN HD.
I don't have the required data for some regionals (e.g. some of the STQ stations in Queensland) that will be getting 7flix. Data for that may filter through later when I start getting updates for WIN HD.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
While a number of posts that contain data for picon setup for new channels were lost in the forum outage yesterday Mon 6 Mar, I have copies of all that data on my computer, so none of that data was lost, and there's no need to repost
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
The recent online beta releases contain all the picon updates for the recent changes in Ten, Seven, STQ and NBN.
Today I intend to submit the data I've collected for WIN so far. Any further updates or new data sets for regions that aren't yet covered will, of course, be accepted and be submitted to the picon repository, but they may not make the next release.
The current state of the region picon updates is:
The "state of play" for updates is:
I have up-to-date data for:
Adelaide
Bendigo
Brisbane
Canberra
Central Coast
Geelong
Gold Coast
Hobart
Melbourne
Newcastle
Northern Rivers NSW
Orange
Perth
SpencerGulfSA
Sunshine Coast
Sydney
Toowoomba
Townsville
Warrnambool
Wide Bay
I still don't have up-to-date data for:
Albany WA
Ballarat
Launceston
Wollongong
Today I intend to submit the data I've collected for WIN so far. Any further updates or new data sets for regions that aren't yet covered will, of course, be accepted and be submitted to the picon repository, but they may not make the next release.
The current state of the region picon updates is:
The "state of play" for updates is:
I have up-to-date data for:
Adelaide
Bendigo
Brisbane
Canberra
Central Coast
Geelong
Gold Coast
Hobart
Melbourne
Newcastle
Northern Rivers NSW
Orange
Perth
SpencerGulfSA
Sunshine Coast
Sydney
Toowoomba
Townsville
Warrnambool
Wide Bay
I still don't have up-to-date data for:
Albany WA
Ballarat
Launceston
Wollongong
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
Is there an update for Hobart yet?
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
ad wrote:Is there an update for Hobart yet?
The post immediately before yours.prl wrote:I still don't have up-to-date data for:
...
Hobart
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
In other words, prl needs you to send him the data.
Follow the instructions here:
viewtopic.php?f=42&t=9355#p124843
Follow the instructions here:
viewtopic.php?f=42&t=9355#p124843
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Re: Request for updates for channel picons
prl has submitted another picon update. It was merged into current beta and it will be rolled out overnight.
Thanks.
Thanks.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
The update is now available.
It adds picons to the newly-rearranged WIN services in the locations I received data for, has long-awaited updates for Wide Bay and Bendigo and adds Townsville to the list of areas that have picon data.
It adds picons to the newly-rearranged WIN services in the locations I received data for, has long-awaited updates for Wide Bay and Bendigo and adds Townsville to the list of areas that have picon data.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Apprentice
- Posts: 66
- Joined: Fri Oct 09, 2015 00:27
- Location: Sunshine Coast QLD - Bald Knob Transmitters
Re: Request for updates for channel picons
All Picons look great for the Sunshine Coast - thanks prl.
Includes all new WIN stuff plus Bris and local 7flix (76 & 66) and Bris 10HD (13) - All receivable on Sunshine Coast.
Great work.
Includes all new WIN stuff plus Bris and local 7flix (76 & 66) and Bris 10HD (13) - All receivable on Sunshine Coast.
Great work.
Beyonwiz T2 X 2
Linden 65” UHD LED LCD TV
Linden 65” UHD LED LCD TV
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Do USB updates over write settings? I have a T2 (disk less) set up to use my T4 disc. If I do a back up on T2 it appears to overwrite my T4 backup.
Re: Request for updates for channel picons
Yes, it is likely that the backup location is the same as your T4's backup location if you are sharing the same harddisk.Trial_Master wrote:Do USB updates over write settings? I have a T2 (disk less) set up to use my T4 disc. If I do a back up on T2 it appears to overwrite my T4 backup.
You can customise the backup location directory by going into your T2's plugins browser, and selecting the Software manager (from memory). from there, the destination directory for backups can be customised (I think from the "Advanced" section).
You can either create a new folder on the T4's harddisk, or backup your settings to USB.
And yes, USB updates will overwrite your settings. You will need to manually restore the settings following the upgrade (the initial setup wizard will not let you do it).
This is why it is a fairly good idea to have some sort of storage, however small, installed in the T2. A small SSD (120GB) for around $60 makes for a good drive to store settings backups, 3rd party plugins and patches, and also act as a local timeshift device.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Ok I'll see if I can find the drive I had on H1. It makes sense I guess
Thanks for clearing up the back up issue.
Thanks for clearing up the back up issue.
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
That's awesome thanks! I was just on the phone to Beyonwiz to work out how to change Backup location, shame I didn't read your post properly first. Anyway had them stumped and suggestion was to ask here. I'm just about to update both boxes to beta firmware now,MrQuade wrote:You can customise the backup location directory by going into your T2's plugins browser, and selecting the Software manager (from memory). from there, the destination directory for backups can be customised (I think from the "Advanced" section).
Thanks for all of your assistance. I've learnt more again today
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
From liveTV, PLUGIN>Software management>Advanced options>Select backup location.MrQuade wrote:...
You can customise the backup location directory by going into your T2's plugins browser, and selecting the Software manager (from memory). from there, the destination directory for backups can be customised (I think from the "Advanced" section).
...
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Did you use beyonwiz-4.4 20160125 beta firmware? I just updated and my logos for 7flix and TenHD are still missing?mac37 wrote:All Picons look great for the Sunshine Coast - thanks prl.
Includes all new WIN stuff plus Bris and local 7flix (76 & 66) and Bris 10HD (13) - All receivable on Sunshine Coast.
Great work.
Re: Request for updates for channel picons
Hi Trial_Master,
Have you checked the icons against the channels in the "Terrestrial TV LCN" bouquet? If they are not correct there then you should rescan your channels and test again.
Regards,
Ian.
Have you checked the icons against the channels in the "Terrestrial TV LCN" bouquet? If they are not correct there then you should rescan your channels and test again.
Regards,
Ian.
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Just tried those steps and no change?
Re: Request for updates for channel picons
Hi Trial_Master,
Try a manual scan for each of the problem broadcasters and enable the "Clear before scan" option. See if that helps.
Regards,
Ian.
Try a manual scan for each of the problem broadcasters and enable the "Clear before scan" option. See if that helps.
Regards,
Ian.
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Just did the channel 7 channels and no change. Rebooted pvr and still no change?
I am using the correct beta software aren't I?
I am using the correct beta software aren't I?
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Request for updates for channel picons
If you're still on the January beta then you haven't had any online updates - see Switching your software feed to a live betaTrial_Master wrote: Did you use beyonwiz-4.4 20160125 beta firmware? I just updated and my logos for 7flix and TenHD are still missing?
The picon updates are in the 7-Mar beta
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
That will be it. Thanks I'll get onto it.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
What firmware version? The new picon setup is only in recent beta updates. The most recent update is 2016-03-07 11:59.Trial_Master wrote:... Did you use beyonwiz-4.4 20160125 beta firmware? I just updated and my logos for 7flix and TenHD are still missing?
7flix and TEN HD links should definitely be there for Brisbane. These updates are not in the 20160125 beta firmware firmware, but in an online update from that firmware. To get beta online updates you need to follow the instructions in Switching your software feed to a live beta. When you've done the steps in those instructions, reboot or restart the GUI and wait for it to do the automatic scan for updates (or do MENU>Setup>Software manager>Check for updates now) Reloading beta firmware from USB turns off the live beta update feed.
If you were already running the 2016-03-07 11:59 beta, or updating doesn't get the new picons:
In live TV change service to 7flix, then MENU>Settings>Information>Service. The bottom line of the screen should be "Service reference" with a string of colon-separated hex and decimal numbers. What is it?
Then the same for TEN HD.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Hi Peter. I installed the January beta via USB today and didn't realise there was the additional process for a live beta stream. My silly.
I have the T4 working fine with new icons now and am about to do same with T2.
Been a big day of learning but I've really enjoyed it. Thanks for the new icons looks much better now.
I have the T4 working fine with new icons now and am about to do same with T2.
Been a big day of learning but I've really enjoyed it. Thanks for the new icons looks much better now.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Glad it's sorted
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
Hi Trial_Master,
Sorry I miss-read your first post. I thought you had 20160125 beta and just updated to the latest (March) beta.
Anyway it sound like you have it all sorted now.
Regards,
Ian.
Sorry I miss-read your first post. I thought you had 20160125 beta and just updated to the latest (March) beta.
Anyway it sound like you have it all sorted now.
Regards,
Ian.
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
It was more likely my lack of understanding and explanation of issue that caused the confusion. Thanks for helping out!IanSav wrote:Hi Trial_Master,
Sorry I miss-read your first post. I thought you had 20160125 beta and just updated to the latest (March) beta.
Anyway it sound like you have it all sorted now.
Regards,
Ian.
-
- Apprentice
- Posts: 66
- Joined: Fri Oct 09, 2015 00:27
- Location: Sunshine Coast QLD - Bald Knob Transmitters
Re: Request for updates for channel picons
Hi Trial Master,
Sorry I didn't reply, I've been in Brisbane all day - should have called in !!
You have by now obviously found last nights beta update, and all the new picons.
All the best.
Sorry I didn't reply, I've been in Brisbane all day - should have called in !!
You have by now obviously found last nights beta update, and all the new picons.
All the best.
Beyonwiz T2 X 2
Linden 65” UHD LED LCD TV
Linden 65” UHD LED LCD TV
-
- Guru
- Posts: 623
- Joined: Mon Jul 28, 2008 21:50
- Location: Brisbane, Australia
Re: Request for updates for channel picons
Hi Mac
Got there eventually and everything is working perfectly, thanks to all the regular friendly folk here.
Got there eventually and everything is working perfectly, thanks to all the regular friendly folk here.
Re: Request for updates for channel picons
Any sign yet down the track of getting the new picons via a stable release?
Steve
Steve
Re: Request for updates for channel picons
Hi Steve,
I think we are coming close to a new stable release.
Regards,
Ian.
I think we are coming close to a new stable release.
Regards,
Ian.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
There was more changed in the recent betas than just the picons, so it's about the stability of those changes as well as any problems with the picon data. So far there's been one bug found and fixed in the recent code changes, and no problems found in the picons (other than problems due to re-scanning for some of the channel changes being more complicated than usual).
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Master
- Posts: 184
- Joined: Wed Feb 20, 2008 10:47
- Location: Tweed Heads West
Re: Request for updates for channel picons
Hi Pri
Latest picon update all good with one exception, there was no Channel 10 HD picon in the download for the Gold Coast area.
If needs-be I can just do a scan for channel 10 network for the Gold Coast area and post to you.
Thanks.
Regards
Lance
Latest picon update all good with one exception, there was no Channel 10 HD picon in the download for the Gold Coast area.
If needs-be I can just do a scan for channel 10 network for the Gold Coast area and post to you.
Thanks.
Regards
Lance
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
There is a picon link for Ten HD in the Gold Coast data I have, but is the same serviceref as for Brisbane. I'm not sure whether that is correct.Sir Lancelot wrote:... Latest picon update all good with one exception, there was no Channel 10 HD picon in the download for the Gold Coast area.
I'd prefer a complete scan rather than just Ten, because then I'm sure I have everything up-to-date.Sir Lancelot wrote:If needs-be I can just do a scan for channel 10 network for the Gold Coast area and post to you.
But before you do that, could you check the servicerefs you have for Ten channels?
In live TV, change channels to Ten Digital (not HD), then go to MENU>Setup>Information>Service. What is the displayed Service reference at the bottom of the list in the screen?
Then do the same for Ten HD, and post the servicerefs and the corresponding names.
Just as an aside, when you scanned for Ten HD, did you get any duplicates (LCNs >= 350) in Terrestrial TV LCN? If there are, the problem may be caused by how the scan was done, rather than with the picon setup.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Master
- Posts: 184
- Joined: Wed Feb 20, 2008 10:47
- Location: Tweed Heads West
Re: Request for updates for channel picons
Hi Pri
Thanks for your reply.
I checked the service refs as you suggested and found them to be different.
Then I checked for duplicate LCN's in the Terrestrial TV LCN, found that I had used a channel 10 in my bouquet, and surprisingly it came up as a high definition picture, just the same as channel 13.
Deleted channel 10 Ten from my bouquet and added channel 13 to it. Works perfectly with exactly the same quality picture (1920x1080i 50Hz) complete with the 10HD picon.
Thanks again Pri, your comment about looking in the Terrstrial LCN gave me the clue.
Your help to a 77 year old is much appreciated.
Regards
Lance
Thanks for your reply.
I checked the service refs as you suggested and found them to be different.
Then I checked for duplicate LCN's in the Terrestrial TV LCN, found that I had used a channel 10 in my bouquet, and surprisingly it came up as a high definition picture, just the same as channel 13.
Deleted channel 10 Ten from my bouquet and added channel 13 to it. Works perfectly with exactly the same quality picture (1920x1080i 50Hz) complete with the 10HD picon.
Thanks again Pri, your comment about looking in the Terrstrial LCN gave me the clue.
Your help to a 77 year old is much appreciated.
Regards
Lance
Re: Request for updates for channel picons
Picon update from earlier today has been merged and pushed out to the beta feed.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
This latest picon update updates the Ten Digital picon file. It doesn't update or add any broadcast areas.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
Here is the Hobart file. Compresses with WinRAR as a ZIP file. Hope it works.
- Attachments
-
- Hobart.zip
- (1.71 KiB) Downloaded 53 times
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Thanks, ad. There's no need to provide scan data from different models. The two files you included were identical (and correct).
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
just updated to the beta firmware and Switched to the live beta feed. i now have all the picons for my channels. my T4 looks so much better with the picons. thanks prl appreciate it.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Thanks, jas555.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
Here's Toowoomba's XML from both the T3 and T4 as requested
- Attachments
-
- Toowoomba.zip
- (1.55 KiB) Downloaded 74 times
Wiz V2
65" Samsung
Logitech Harmony Elite
Denon sound system
Duct Tape & Fencing Wire
65" Samsung
Logitech Harmony Elite
Denon sound system
Duct Tape & Fencing Wire
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Thanks, Nodeity. I'll be busy on RL stuff the next few days. I probably won't get to look at it properly until the weekend.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Request for updates for channel picons
Slightly OT but where does OpenWebif get its icons from?
Just noticing it is missing a couple and the updated ones too.
Just noticing it is missing a couple and the updated ones too.
Cheers
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro
Gully
_____________
Beyonwiz U4
Logitech Harmony Elite
Google Pixel 6 Pro
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Request for updates for channel picons
Where in OpenWebif? I just tried OpenWebif Main>Television>Current while tuned to WIN HD, WIN LIFE and SBS NITV in Canberra (2 new channels and 1 new picon for an older channel) and all the picons there are OK, so I assume it ultimately gets the picons from the same place as the PVR does, /picon.Gully wrote:Slightly OT but where does OpenWebif get its icons from?
Just noticing it is missing a couple and the updated ones too.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV