U4 remote control wont fast forward
U4 remote control wont fast forward
Recently the fast forward buttons stopped working, thought it might be battery related but every other button works as normal. The button either side of the 'ok' button don't work. To move video forward or back I can only use the buttons on top and below of the 'ok' button. Better than nothing but not as precise. Has anyone come across this issue before?
Re: U4 remote control wont fast forward
Assuming you are taking about the LEFT and RIGHT arrow buttons, those are set to skip functions, not FF/REW.
Do they work in the menus?
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Re: U4 remote control wont fast forward
The left works but the right doesn't work at all.
Re: U4 remote control wont fast forward
Do you can still skip back, with the LEFT button, but not forward with the RIGHT button?
And the same effect in menus, you can navigate left, but not right?
Of so, then it does sound like that button has physically packed it in.
A quick thing to try might be a fresh set of batteries just in case.
You could attempt a repair by opening up the remote and cleaning off the contacts on that button.
If that doesn't work, you might be able to temporarily work around that by enabling the keypad skip buttons. That will give you more results to skip forward using the 3,6 and 9 buttons.
Ultimately, if the remote can't be repaired, you'll need to replace it. I'm not sure what options exist for an original remote these days...... New or second hand.
Or else you could go down the universal remote route. Now that the Logitech Harmony line is discontinued, I'm not sure what your best option is there either.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: U4 remote control wont fast forward
Cheers for all the ideas. Don't wanna open it up because I know I'll end up wrecking it. The one in the shop is good to know. The using the numbers instead sounded good so I went into settings. While in there I came up with a different idea. I changed the time on the 'Up' skip button to the same as the left and rights. So down to 10 seconds . Problem solved.
Re: U4 remote control wont fast forward
The 'ok' button now barely works and if it does get going then the stop button doesn't work . It's made the device unusable so I've ordered a new remote.
Re: U4 remote control wont fast forward
Got my new remote today but had to use old remote to access setup menu, which was almost a disaster coz the ok button barely works so choosing stuff on the menus was touch and go, almost 5 minutes on each choice with multiple presses of the ok. But finally got the new remote connected and now it's effortless to use the pvr now.
Re: U4 remote control wont fast forward
Most intermittent remotes can be fixed relatively easily. If you can get them open in the first place.