Looking at the screenshot, you are running an old version of the front panel firmware. If you want reliable operation, you must update to 20057.csutak40 wrote:So, I don't need to worry about the Bootloader for the T2 & the T4?
The latest released bootloader for T4 is dated Mon Jun 15 2015.
How to upgrade the bootloader:
* Do not turn off power to your T4 while performing the bootloader update. Doing so will render the T4 inoperable and the only way to recover is to send the T4 away for service.
* Mount a USB drive on your computer.
* If the USB drive has a beyonwiz folder from a previous update delete the entire beyonwiz folder.
* Uncompress the downloaded bootloader update file to the top level directory on the USB drive.
* Your USB drive should end up with a beyonwiz directory (folder) at the top level.
* Unmount the USB drive from your PC and unplug it.
* Press and hold the power button on the T4 remote for 3 seconds and select shutdown
* Once the T4 has fully shut down, turn the rear power switch on the T4 to the OFF position.
* Wait 30 seconds.
* Unplug all USB devices from the T4.
* Connect the USB drive with the bootloader to any USB port on the T4 - make sure that the connection is secure.
* Power on the T4.
* The bootloader will be updated without any prompting and the front display will show either "Flash CFE" or "Upgrading" depending on the previous bootloader version you are running.
* The process will be much quicker than a normal firmware upgrade and should take less than 10 seconds.
* Once the update is complete the T4 will either reboot on its own or prompt you to remove the USB drive and press the power button on the front panel to reboot.
* Once your T4 has fully rebooted hold down the Power button on the T4 Remote and select Shutdown.
* Disconnect the update USB drive from the T4.
* Connect the USB update drive to your PC and delete the beyonwiz folder. This is important, so that future uses of this USB drive do not cause issues.
* Reconnect any USB devices to your T4, as required.
* Power on the T4 and you are all done
* To confirm that you have the latest Bootloader installed successfully press the Menu button on the T4 and scroll across to the far right of the Menu and select Information and then Select About, the date of your Bootloader should be June 15, 2015.
Tip: Use a USB 1.1 compatible drive. Most USB drives are USB 1.1 compatible, but some newer drives may not be. If your fancy USB 3.1 drive does not work, look in the bottom of your box-of-tricks for an old USB drive.