Video: Rescanning your TV channels

Post by **Wiz HQ** » Thu Nov 26, 2015 10:11

With the launch of 9HD and 9life here is a quick Video demo on how to rescan the channels on your T2, T3 and T4.

Gully · Post by **Gully** » Thu Nov 26, 2015 10:35

Just to add, make sure you haven't turned off Enable multiple bouquets in the Channel selection settings, otherwise you will get some strange behaviour like no LCNs.

BigbobOz · Post by **BigbobOz** » Fri Nov 27, 2015 22:01

What will happen to existing timers? Using IceTv, will I need to pull over the timers again?

Also, what will happen to favourites already set up?

Thanks,
Rob

MrQuade · Post by **MrQuade** » Fri Nov 27, 2015 22:44

Rescanning should not affect your favorites or timers.

If you had timers set on channels that no longer exist, then you may need to re send them from ice tv.

simoncasey · Post by **simoncasey** » Sat Nov 28, 2015 12:01

Actually you will have issues with timers for the changed channels. If you had gem as 90 in icetv then your existing gem timers will now record on nine hd. You could resend all timers by its less hassle to just go through your existing timers for the various nine channels in the BW and check they are on the correct channel.

st0ney123 · Post by **st0ney123** » Sun Jun 05, 2016 19:39

Hi.
On my old DP-lite I knew how to make it ignore the weaker digital signals for the duplicate channels.
On the T2 I have no idea. Tonight, due to the rain and wind I'm most likely on the weaker prime channels in the newcastle region.
Any help with the finer art of channel tuning woukd be greatly appreciated.
All the other channels are fine.
Channel 6 is on 578.5Mhz 7Mhz Auto-auto-auto