Regards to Further Error Log Reports
Regards to Further Error Log Reports
Good Afternoon I have already Posted these Log Lists these are the Bug reports from the failed multiple "Factory Reset’s" from 3 weeks ago, as well as all the others in the below mentioned Posts:
• trace-back failure, with no name
• twisted internet error connection
• font panel display says “DVB services” mode
• The Clock and Date are way out: ‘Thursday 01 January 1970 1006 AM
• THE actual correct Date and Time was 31st October 03.26
• Is this remote Okay? 2 Choices “NO or YES” while counting down from 30 seconds
• the NO or YES is locked in at “NO”
• there is no enigma file 2 asks “WHY” run service test shutdown
• exception in Python start-up code
• Line 280 Shutdown
• Line 673 Shutdown
• Line 591 ????
• Error: ‘ERMO 28’
• No space left on Device
These are not appearing now .Today I tried 3 times to scan and Load Services from EPG and It won’t? I thought it would emulate the TV’s Digital Services List but that could be normal?
This morning I tried to Play a Recording from a USB (Red & Black Sans) > menu Recordings > Red Black Sans > Green Button Says > Go To Red and Black Sands USB > Dublin Murders?
It starts with sound but no picture then it displays the Error Log Page:
We are really sorry / Home Root Log, Enigma 2 Crash’ Thursday 01 January 1970 10.06 AM
so I am just trying to make sure before I do the Firmware upgrade, hopefully this will be a good outcome
Thanks for your help Regards Dazzla_1
• trace-back failure, with no name
• twisted internet error connection
• font panel display says “DVB services” mode
• The Clock and Date are way out: ‘Thursday 01 January 1970 1006 AM
• THE actual correct Date and Time was 31st October 03.26
• Is this remote Okay? 2 Choices “NO or YES” while counting down from 30 seconds
• the NO or YES is locked in at “NO”
• there is no enigma file 2 asks “WHY” run service test shutdown
• exception in Python start-up code
• Line 280 Shutdown
• Line 673 Shutdown
• Line 591 ????
• Error: ‘ERMO 28’
• No space left on Device
These are not appearing now .Today I tried 3 times to scan and Load Services from EPG and It won’t? I thought it would emulate the TV’s Digital Services List but that could be normal?
This morning I tried to Play a Recording from a USB (Red & Black Sans) > menu Recordings > Red Black Sans > Green Button Says > Go To Red and Black Sands USB > Dublin Murders?
It starts with sound but no picture then it displays the Error Log Page:
We are really sorry / Home Root Log, Enigma 2 Crash’ Thursday 01 January 1970 10.06 AM
so I am just trying to make sure before I do the Firmware upgrade, hopefully this will be a good outcome
Thanks for your help Regards Dazzla_1
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re: Regards to Further Error Log Reports
If nothing else, the firmware update will provide a new fresh start without any leftover configuration nasties from previous setup attempts.
None of these bugs you describe are symptoms of any known bugs that are present in the version of firmware you are currently running, so there is some other factor at play here.
Once you have your physical connections sorted out, and a good reliable network connection to the Wiz, you should be able to flash the latest 19.3 firmware image, which is now a "release candidate" and can be found here.
Logitech Harmony Ultimate+Elite RCs
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Beyonwiz T2/3/U4/V2, DP-S1 PVRs
Denon AVR-X3400h, LG OLED65C7T TV
QNAP TS-410 NAS, Centos File Server (Hosted under KVM)
Ubiquiti UniFi Managed LAN/WLAN, Draytek Vigor130/Asus RT-AC86U Internet
Pixel 4,5&6, iPad 3 Mobile Devices
Re: Regards to Further Error Log Reports
Thank You
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re: Regards to Further Error Log Reports
I am about to do my V2 and I noticed when I opened the zip file the usual Beyonwiz folder was not present just the 2 files imageversion and USB_update.bin
Is this correct?
Is this correct?
BeyonWiz T3 and V2
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast
LED TV SONY Bravia 75" Local dimming ~ Retired Samsung ES8000 65" ~
Yamaha A1070 amp
Zidoo UHD3000
Qnap TS851-4G
Pioneer Bluray BDP-150-K
Windows 11 Professional
Netgear R7000
Chromecast
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Regards to Further Error Log Reports
Yep, as shown in the "How to upgrade the Beyonwiz V2 firmware via USB" topic, about 4m:20s into the video.
"How to Upgrade or Recover the Firmware on Beyonwiz V2 PVR" - https://www.youtube.com/watch?v=usnsau- ... e=youtu.be
Re: USB UPGRADE FAILED Further Error Log Reports
[quote=Dazzla_1 post_id=182670 time=1573452750 user_id=125733]
Good Afternoon I have already Posted these Log Lists these are the Bug reports from the failed multiple "Factory Reset’s" from 3 weeks ago, as well as all the others in the below mentioned Posts:
• trace-back failure, with no name
• twisted internet error connection
• font panel display says “DVB services” mode
• The Clock and Date are way out: ‘Thursday 01 January 1970 1006 AM
• THE actual correct Date and Time was 31st October 03.26
• Is this remote Okay? 2 Choices “NO or YES” while counting down from 30 seconds
• the NO or YES is locked in at “NO”
• there is no enigma file 2 asks “WHY” run service test shutdown
• exception in Python start-up code
• Line 280 Shutdown
• Line 673 Shutdown
• Line 591 ????
• Error: ‘ERMO 28’
• No space left on Device
These are not appearing now .Today I tried 3 times to scan and Load Services from EPG and It won’t? I thought it would emulate the TV’s Digital Services List but that could be normal?
This morning I tried to Play a Recording from a USB (Red & Black Sans) > menu Recordings > Red Black Sans > Green Button Says > Go To Red and Black Sands USB > Dublin Murders?
It starts with sound but no picture then it displays the Error List Log :
The Continuation; Following your advice I tried to Install
19.3-beyonwizu4-20191106_usb AND 19.3-beyonwizu4-20191022_usb - Respectfully
Each one' Once, from the Front Port and Once at the Back
On another USB I attempted exactly the same way
Red Button Off >USB Inserted > Red Button to ON. [i]Wiz Front Panel[/i] >Says Loading > B-WIZ Blue white Splash and white Icon on TV > Then the Spinner starts and that's it > BWiz's blank black screen > then the same error list log as before
"We are really sorry / Home Root Log, Enigma 2 Crash’ Thursday 01 January 1970 10.06 AM ETC ETC" See all above
and "Exception in Python Start-UP" Wiz Front Panel Displaying DVB Service But it will not Load or Scan EPG services
Thanks Dazzla_1
Good Afternoon I have already Posted these Log Lists these are the Bug reports from the failed multiple "Factory Reset’s" from 3 weeks ago, as well as all the others in the below mentioned Posts:
• trace-back failure, with no name
• twisted internet error connection
• font panel display says “DVB services” mode
• The Clock and Date are way out: ‘Thursday 01 January 1970 1006 AM
• THE actual correct Date and Time was 31st October 03.26
• Is this remote Okay? 2 Choices “NO or YES” while counting down from 30 seconds
• the NO or YES is locked in at “NO”
• there is no enigma file 2 asks “WHY” run service test shutdown
• exception in Python start-up code
• Line 280 Shutdown
• Line 673 Shutdown
• Line 591 ????
• Error: ‘ERMO 28’
• No space left on Device
These are not appearing now .Today I tried 3 times to scan and Load Services from EPG and It won’t? I thought it would emulate the TV’s Digital Services List but that could be normal?
This morning I tried to Play a Recording from a USB (Red & Black Sans) > menu Recordings > Red Black Sans > Green Button Says > Go To Red and Black Sands USB > Dublin Murders?
It starts with sound but no picture then it displays the Error List Log :
The Continuation; Following your advice I tried to Install
19.3-beyonwizu4-20191106_usb AND 19.3-beyonwizu4-20191022_usb - Respectfully
Each one' Once, from the Front Port and Once at the Back
On another USB I attempted exactly the same way
Red Button Off >USB Inserted > Red Button to ON. [i]Wiz Front Panel[/i] >Says Loading > B-WIZ Blue white Splash and white Icon on TV > Then the Spinner starts and that's it > BWiz's blank black screen > then the same error list log as before
"We are really sorry / Home Root Log, Enigma 2 Crash’ Thursday 01 January 1970 10.06 AM ETC ETC" See all above
and "Exception in Python Start-UP" Wiz Front Panel Displaying DVB Service But it will not Load or Scan EPG services
Thanks Dazzla_1
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re: Regards to Further Error Log Reports
You have to hold the power button down while it says "boot" (power off/on, or MENU>Power>Reboot), after a little while it will change to "Updt", then you can let go, wait a bit more and then you can recover from USB.
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Regards to Further Error Log Reports
I don't think that applies - he has a U4 (not a V2?).
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: USB UPGRADE FAILED Further Error Log Reports
Dazzla_1 wrote: ↑Sat Nov 16, 2019 11:49The Continuation; Following your advice I tried to Install
19.3-beyonwizu4-20191106_usb AND 19.3-beyonwizu4-20191022_usb - Respectfully
Each one' Once, from the Front Port and Once at the Back
On another USB I attempted exactly the same way
Red Button Off >USB Inserted > Red Button to ON. Wiz Front Panel >Says Loading > B-WIZ Blue white Splash and white Icon on TV > Then the Spinner starts and that's it > BWiz's blank black screen > then the same error list log as before
"We are really sorry / Home Root Log, Enigma 2 Crash’ Thursday 01 January 1970 10.06 AM ETC ETC" See all above
and "Exception in Python Start-UP" Wiz Front Panel Displaying DVB Service But it will not Load or Scan EPG services
It appears the firmware is not being detected on the USB flash drive, thus booting into your existing corrupted setup.
Ensure the USB flash drive is formatted in FAT32.
Ensure you extract the firmware to the flash drive so it has a 'beyonwiz' folder at the top level of the flash drive, the 'u4' folder within that, and then the 6 extracted files are within that 'u4' folder.
Watch the video - https://www.youtube.com/watch?v=hhh_8Ru ... e=youtu.be
USB preparation is shown at ~03:42
Firmware download extraction is shown at ~05:54
Read the firmware installation guide - https://beyonwiz.com.au/u4/HowToUpgrade ... U4v175.pdf
edited - to specify "model" folder, and add video times.
Last edited by Grumpy_Geoff on Sat Nov 16, 2019 12:27, edited 1 time in total.
Re: Regards to Further Error Log Reports
Quite right.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Regards to Further Error Log Reports
The "No space on device" error in that context suggests that at some time the U4 was run without any recording disk mounted, and recordings have been made into the firmware flash, filling it up.
That shouldn't prevent a re-flash of the firmware, though.
That shouldn't prevent a re-flash of the firmware, though.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Regards to Further Error Log Reports
Thanks adoxa I have just rectified that U4 error and added U4 to my signature Sorry about that and thanks for your help Cheers Dazzla_1
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re: Regards to Further Error Log Reports
You wont believe It people "adoxa" you were right everything you said was correct happened THIS TIME
I decided to give USB "L" one more try before writing back' I cannot Elaborate now, I have to go out I will relate it bit by bit to you all in on Sunday AM I ill send the Screen Shots 4 or 5 of them and exactly what I did that may help someone else Cheers to All Thank you see you tomorrow AM Cheers Dazzla_1
I decided to give USB "L" one more try before writing back' I cannot Elaborate now, I have to go out I will relate it bit by bit to you all in on Sunday AM I ill send the Screen Shots 4 or 5 of them and exactly what I did that may help someone else Cheers to All Thank you see you tomorrow AM Cheers Dazzla_1
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Regards to Further Error Log Reports
[quote=Dazzla_1 post_id=182725 time=1573881449 user_id=125733]
[attachment=3]1] Both USB 'L' and USB 'Little Red Sans'-- both USB's are FAT32 both have a BWizr Update in the top of the USBS Both Haave U4 and Six files within them-2019-11-16_14h02_40.jpg[/attachment][attachment=2]2] The Six Files Within the U4 Folder - 2019-11-16_14h09_53.jpg[/attachment][attachment=1]3] I still seem to have BBCode problems I have done as you suggested-2019-11-16_14h21_05.jpg[/attachment][attachment=0]4 ] USB [L] Sat - 2019-11-16_14h01_04.jpg[/attachment]You wont believe It people "adoxa" you were right [u]everything [/u]you said was correct happened THIS TIME
I decided to give USB "L" one more try before writing back' I cannot Elaborate now, I have to go out I will relate it bit by bit to you all in on Sunday AM I ill send the Screen Shots 4 or 5 of them and exactly what I did that may help someone else Cheers to All Thank you see you tomorrow AM Cheers Dazzla_1 :lol: :?: :D
[/quote]
Good afternoon, I did exactly what adoxa said but I realised it was going somewhere when the splash icon appeared on the TV screen but this time it had a start button Icon in the middle of it so I touched the Front panel start button and a Red one came alive behind it and then the panel said Boot-up Boot up-date I waited and then it stopped and started to boot again so I removed the USB and it went straight to SCAN Programs which it did and now I can find my way around the machine bit by bit I'm still having trouble with the BBCode as you can see everything is Off but its still working t :) :D
[attachment=3]1] Both USB 'L' and USB 'Little Red Sans'-- both USB's are FAT32 both have a BWizr Update in the top of the USBS Both Haave U4 and Six files within them-2019-11-16_14h02_40.jpg[/attachment][attachment=2]2] The Six Files Within the U4 Folder - 2019-11-16_14h09_53.jpg[/attachment][attachment=1]3] I still seem to have BBCode problems I have done as you suggested-2019-11-16_14h21_05.jpg[/attachment][attachment=0]4 ] USB [L] Sat - 2019-11-16_14h01_04.jpg[/attachment]You wont believe It people "adoxa" you were right [u]everything [/u]you said was correct happened THIS TIME
I decided to give USB "L" one more try before writing back' I cannot Elaborate now, I have to go out I will relate it bit by bit to you all in on Sunday AM I ill send the Screen Shots 4 or 5 of them and exactly what I did that may help someone else Cheers to All Thank you see you tomorrow AM Cheers Dazzla_1 :lol: :?: :D
[/quote]
Good afternoon, I did exactly what adoxa said but I realised it was going somewhere when the splash icon appeared on the TV screen but this time it had a start button Icon in the middle of it so I touched the Front panel start button and a Red one came alive behind it and then the panel said Boot-up Boot up-date I waited and then it stopped and started to boot again so I removed the USB and it went straight to SCAN Programs which it did and now I can find my way around the machine bit by bit I'm still having trouble with the BBCode as you can see everything is Off but its still working t :) :D
- Attachments
-
- 4 ] USB [L] Sat - 2019-11-16_14h01_04.jpg (34.62 KiB) Viewed 3100 times
-
- 3] I still seem to have BBCode problems I have done as you suggested-2019-11-16_14h21_05.jpg (70.56 KiB) Viewed 3100 times
-
- 2] The Six Files Within the U4 Folder - 2019-11-16_14h09_53.jpg (50.69 KiB) Viewed 3100 times
-
- 1] Both USB 'L' and USB 'Little Red Sans'-- both USB's are FAT32 both have a BWizr Update in the top of the USBS Both Haave U4 and Six files within them-2019-11-16_14h02_40.jpg (52.7 KiB) Viewed 3100 times
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Regards to Further Error Log Reports
Um, BBCode isn't working because you have "Disable BBCode" ticked.
BBCode needs to be enabled for BBCode markup to work.
BBCode needs to be enabled for BBCode markup to work.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Regards to Further Error Log Reports
Morning Peter it makes[b] no difference [/b]that I can see? [b][/b] or [b][/b] makes no difference Peter ?
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Regards to Further Error Log Reports
What doesn't make any difference?
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
-
- Uber Wizard
- Posts: 6490
- Joined: Thu Mar 05, 2009 22:54
- Location: Perth
Re: Regards to Further Error Log Reports
In the image you attached to your earlier post, you highlighted that the 'Disable BBCode' option was ticked - download/file.php?id=5010
You shouldn't be ticking that option, you should have it unticked.
See below where I put a dummy reply to your "makes no difference" post, leaving your text exactly as you entered it, and I had the 'Disable BBCode' option unticked (as per my profile default). You'll see the post preview function correctly bolds your "no difference" phrase (as does my above "quoting" of your post).
At times, BBCode markup is correctly formatting some of your posts, e.g. the word 'everything' is underlined as per your markup formatting in this post - viewtopic.php?f=42&t=13707&p=182752#p182725 earlier in the topic.
I'm not sure what you're doing different at times.
Do you have the 'Enable BBCode by default:' option set to 'Yes' in your forum profile (User Control Panel / Board preferences / Edit posting defaults)? If so, then you shouldn't need to touch the 'Disable BBCode' option when posting/replying.
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Regards to Further Error Log Reports
I asked ages ago about Dazzla_1's profile setting for BBCode. I didn't see a reply, but it may have been there somewhere.
IIRC, smilies were also disabled in that image.
IIRC, smilies were also disabled in that image.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Regards to Further Error Log Reports
If you look at these Two before and after Screen Shots it makes no difference I know prl, Gully Mr Quade and Geoff all of you have tried to help' but it's a problem it makes the same Mess every time so I will just leave it for the moment and give you all some peace (and myself)
I keep losing Replies I had written to all yesterday thanking you all for your patience and help over the last 2 months and explaining that I would remove the last 2 months of posts and move forward start posting in the other category's which I have done I will have to move on from the BBCodes for the moment this is part of the Demo I lost yesterday So I will do two more screen shots and send with this
Recordings on USB (NTFS) Jerking every time there is a camera shift eg him her back to him her? They are converted from
This is a demo I have touched Noting regarding BBCode Default in Post Replies ? I just do not understand it
I will Post a Dump of the MP4s Converted Data
I keep losing Replies I had written to all yesterday thanking you all for your patience and help over the last 2 months and explaining that I would remove the last 2 months of posts and move forward start posting in the other category's which I have done I will have to move on from the BBCodes for the moment this is part of the Demo I lost yesterday So I will do two more screen shots and send with this
Recordings on USB (NTFS) Jerking every time there is a camera shift eg him her back to him her? They are converted from
This is a demo I have touched Noting regarding BBCode Default in Post Replies ? I just do not understand it
I will Post a Dump of the MP4s Converted Data
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Regards to Further Error Log Reports
There haven't been any other recent reports of lost posts. You need to click on the Submit button for tour post to appear, even if you've used Preview.
Lost posts generally are the result of the forum being hakked, and then they are often all the posts from the previous few days, not specific to a single user.
The markup in your post all seems to have worked, though the use seems a bit overdone for my taste.
Putting "They are converted from" in bold doesn't compensate for the fact the the sentence ends at that point.
Lost posts generally are the result of the forum being hakked, and then they are often all the posts from the previous few days, not specific to a single user.
The markup in your post all seems to have worked, though the use seems a bit overdone for my taste.
Putting "They are converted from" in bold doesn't compensate for the fact the the sentence ends at that point.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Regards to Further Error Log Reports
I was just doing that to demo that it seemed no matter what I was trying to do the BBCode would be visibleprl wrote: ↑Tue Nov 19, 2019 14:15There haven't been any other recent reports of lost posts. You need to click on the Submit button for tour post to appear, even if you've used Preview.
( you have mention Preview at other time's But nobody has ever said you will only see a result to BBCode on off in Preview Mode is that correct prl
Lost posts generally are the result of the forum being hakked, and then they are often all the posts from the previous few days, not specific to a single user.
(probably me so much going on but I will clean all my old stuff Posts up later today and start again
The markup in your post all seems to have worked, though the use seems a bit overdone for my taste.
(I am Sorry Sir' would you prefer it Medium or Rare ?)
Putting "They are converted from" in bold doesn't compensate for the fact the the sentence ends at that point.
Cheers Dazzla_1
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re: Regards to Further Error Log Reports
prl wrote: ↑Tue Nov 19, 2019 14:15There haven't been any other recent reports of lost posts. You need to click on the Submit button for tour post to appear, even if you've used Preview.
Lost posts generally are the result of the forum being hakked, and then they are often all the posts from the previous few days, not specific to a single user.
The markup in your post all seems to have worked, though the use seems a bit overdone for my taste.
Putting "They are converted from" in bold doesn't compensate for the fact the the sentence ends at that point.
I wonder if Dazzla_1 is actually referring to draft posts. At times I have lost drafts of posts but the cause is my own clumsiness. Usually happens with the phone. Once posted, I have only ever accidentally reposted the same draft but never lost a post once submitted. Hence, I have never discussed the annoying sensitivity of the board when posting as I see no point. It is unlikely to change on my say so.
It is possible to compose a long post and inadvertently press the browser "back" (I think) in a moment of distraction whereupon the crafted text disappears. That is, if I'm not finished composing and have to leave the entry window for any reason (e.g. a call) the draft disappears. I try to take care to save a draft of a message to avoid this happening. You would think "forward" would return to the page but often not. Rarely I have managed to return to my incomplete draft but I've never really deciphered the subtlety of it all.
__________________________________
Paul
Beyonwiz T4, 2 x U4: FW - 19.3 20211010
Samsung QA85Q80BAWXXY 4K TV
Samsung QA65Q80TAWXXY 4K TV
Samsung HW Q800BXY soundbar
OverlayHD 1.70, IceTV, Foxtel IQ4
2 x Win7 PCs, 2 x Win10 PCs
Denon AVR -X2400H
Paul
Beyonwiz T4, 2 x U4: FW - 19.3 20211010
Samsung QA85Q80BAWXXY 4K TV
Samsung QA65Q80TAWXXY 4K TV
Samsung HW Q800BXY soundbar
OverlayHD 1.70, IceTV, Foxtel IQ4
2 x Win7 PCs, 2 x Win10 PCs
Denon AVR -X2400H
-
- Wizard God
- Posts: 32714
- Joined: Tue Sep 04, 2007 13:49
- Location: Canberra; Black Mountain Tower transmitters
Re: Regards to Further Error Log Reports
Perhaps. There's not a lot to go on.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Re: Regards to Further Error Log Reports
Its Probably all the above, it's usually caused by me I guess when I write a Reply and go searching for an Attachment or whatever and when I come back it's all gone' the first time I hit save Draft it vanished so now I draft everything on a word Doc first and then correct it and add the Attachment before Pasting
prl I cannot find any BBCode in my Word Docs??? Thanks to all Dazzla_1
prl I cannot find any BBCode in my Word Docs??? Thanks to all Dazzla_1
Beyonwiz U4 - New Nov 2018 - F/ware beyonwiz-19.3 - beyonwiz - U4-2019 - 1106.
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1
Re Flashed U4 -2019 - 1106 F/Ware Oct - 2020 -
SONY BRAVIA - KD-55 x 8500-B - 4K - Ultra HD, LCD, LED, Smart TV
ONKYO TX NR474 -5.1