Firmware Update

Frequently Asked Questions and How To topics for new users.

Moderators: Gully, peteru

Post Reply
benoneill
Apprentice
Posts: 18
Joined: Sun May 02, 2010 20:04

Firmware Update

Post by benoneill » Mon Jun 14, 2010 19:34

Hi all
I'm sure this has been answered a thousand and one times, but I just can't seem to make sense of anything I've seen.

I have a DP-P2 running firmware version 01.07.021. My 'Firmware Information' screen shows:
System Id 0908 0000 0A22 9E3C
Firmware Version DPP2-01.07.021
Loader Version 1.1.3.1.76

I've been to the international Beyonwiz site to get the latest firmware (and I've read the Jan 2010 post about the latest firmware updates) but I don't know if I should be getting 01.05.320 or 01.07.031.

I then looked at the 'instructions' on the international site and:

01.07.31 said 'Do not apply this firmware to product that has serial number 1032097A01150 or lower';
01.05.320 said 'Do not apply this firmware to product that has serial number 1032098BXXXXX or higher'

The SN on the back of my unit is 103209CA00694 which doesn't really help. Each warning has 7 digits and then the letter. My SN has 6 digits and the letter.

I know this is probably a stupid post, but I just don't want to get the wrong firmware and then have to spend hours reversing the mistake.

Thanks in advance.
Top
IanSav
Uber Wizard
Posts: 16846
Joined: Tue May 29, 2007 15:00
Location: Melbourne, Australia

Post by IanSav » Mon Jun 14, 2010 19:56

Hi Benoneill,

Given that your unit is already running the -1.07.xxx series of firmware I would stay with that series.

Regards,
Ian.
Top
benoneill
Apprentice
Posts: 18
Joined: Sun May 02, 2010 20:04

Post by benoneill » Tue Jun 15, 2010 17:39

Thanks Ian
I upgraded to that firmware and everything seems to be fine.

:)
Top
User avatar
peteru
Uber Wizard
Posts: 9737
Joined: Tue Jun 12, 2007 23:06
Location: Sydney, Australia
Contact:
Contact peteru

Re: Firmware Update

Post by peteru » Tue Jun 15, 2010 20:38

benoneill wrote: 01.07.31 said 'Do not apply this firmware to product that has serial number 1032097A01150 or lower';
01.05.320 said 'Do not apply this firmware to product that has serial number 1032098BXXXXX or higher'

The SN on the back of my unit is 103209CA00694
These numbers are in hexadecimal and ordered from lowest to highest they would be:

1032097A01150 (cut off for 01.07.x series)
1032098BXXXXX (cut off for 01.05.x series)
103209CA00694 (yours)

Thus you should use the 01.07.x series of firmware.

"Beauty lies in the hands of the beer holder."
Blog.
Top
Ultrasmart
Apprentice
Posts: 36
Joined: Sun Oct 07, 2007 07:11
Location: Sunny Coast, QLD.

Post by Ultrasmart » Sun Jun 19, 2011 05:58

Sorry if this sounds dumb :oops: but I too am confused re P2 firmware. Mine has serial 103209AA00961, and is 500gb. Do I upgrade to 01.05.350 or 01.07.350 ? Thx for your help.
Cheers, Andrew.
DP-P1(01.05.350) & DP-P2(01.07.350)
HDMI
Top
prl
Wizard God
Posts: 32706
Joined: Tue Sep 04, 2007 13:49
Location: Canberra; Black Mountain Tower transmitters

Post by prl » Sun Jun 19, 2011 08:02

Ultrasmart wrote:Sorry if this sounds dumb :oops: but I too am confused re P2 firmware. Mine has serial 103209AA00961, and is 500gb. Do I upgrade to 01.05.350 or 01.07.350 ? Thx for your help.
Looks like you should upgrade to 01.07.350. What firmware is installed? SETUP>System>Firmware>Firmware Information.
Peter
T4 HDMI
U4, T4, T3, T2, V2 test/development machines
Sony BDV-9200W HT system
LG OLED55C9PTA 55" OLED TV
Top
Ultrasmart
Apprentice
Posts: 36
Joined: Sun Oct 07, 2007 07:11
Location: Sunny Coast, QLD.

Post by Ultrasmart » Sun Jun 19, 2011 09:28

Thx Peter. Haven't set it up yet (bought yesterday), but will check current firmware when I do. Came with USB stick which has 01.07.055 I think. Guessed it would be 01.07 series, but wanted to make sure... :? Thx again.
Cheers, Andrew.
DP-P1(01.05.350) & DP-P2(01.07.350)
HDMI
Top
Post Reply

Return to “FAQs and Tips”