BR-01 - remote codes

emp69 · Post by **emp69** » Wed Oct 21, 2015 21:11

I have just joined as I am looking for some information on programming a remote for a DP - Lite.

Some history.
The remote has some liquid spilt on it and in the process of opening the remote board was cracked. By the way this was not done by me! I have been asked to fix it. So I have managed to get 1/2 the remote working but not the bits needed. So I have a learning remote and was able to capture the codes. However when I use the documented NEC codes they do not work.

The next step was to find out what codes the original Remote was sending, so I setup an Arduino to capture the codes this is what I received.

0 to 9

7D0008F7 //0
7D008877 //1
7D0048B7 //2
7D00C837 //3
7D0028D7 //4
7D00A857 //5
7D006897 //6
7D00E817 //7
7D0018E7 //8
7D009867 //9

But the site tells me it should be

27 0/1/2/3/4/ 5/6/7/8/9 0xBE0010EF 0xBE0011EE 0xBE0012ED 0xBE0013EC 0xBE0014EB 0xBE0015EA 0xBE0016E9 0xBE0017E8 0xBE0018E7 0xBE0019E6

Can any one help me work out why the remote gives different Codes then what is on the site?

Thanks again for your help, I know I can buy a replacement but as this is for a family member I wanted to keep the costs low.

IanSav · Post by **IanSav** » Wed Oct 21, 2015 22:09

Hi Emp69,

Would the Pronto HEX codes help you with your task?

If so have a look at the attachmeny in viewtopic.php?p=126488#p126488

Regards,
Ian.

emp69 · Post by **emp69** » Thu Oct 22, 2015 16:39

Thanks Ian, Looked at all the files in the download and could find a match to my remote codes. I will keep looking but not hopeful.