Beyonwiz Australia

bernien

Here is a photo of the finished product. I did not take photos of the progressive repair. Could have stuck the heatsinks on a bit more squarely, but it works.

bernien

Recently lost tuner C and D. Fixed it myself with just a soldering iron and a few parts. * AMS1117-3.3 Voltage Regulator. Pack of 5 for $3.85 - https://www.ebay.com.au/itm/175005826683 * Pin Grid Array Heatsink - 14mm. 4 off. $3.95 each - https://www.jaycar.com.au/pin-grid-array-heatsink-14mm/p/HH85...

bernien

I have checked all the trash folders and it is not there. Actually I made an error. I did not delete it in OpenWebif. I deleted it when I accesed the Beyonwiz file structure directly over my network, which I often do when I transfer files from and to it so I can delete ads with VideoRedo on my compu...

bernien

Had a look at UFS Explorer but could not access my Beyonwiz from my PC. Looks like my files are lost forever.

bernien

It has been completely deleted. It is not in Trash. OpenWebif only gives the option to delete forever. I meant to delete one file in the folder but unfottunately I had the folder highlighted instead of just the one file and did not read what was being deleted in the popup. Very careless of me.

bernien

I accidently deleted a folder full of receordings using OpenWebif on my computer. Is there a way to receover this folder?

bernien

Nine Melbourne EPG now back on but only up to 5.30 am Sunday. More will probably follow,

bernien

Melbourne EPG finished yesterday. Completely blank today onwards. This is on both the Beyonwiz and direct TV so not a Beyonwiz problem. Surprised that I cannot find anything on Google.

bernien

I have a T4 with version 17.5.20190207. I have tried upgrading to 19.3 via USB but my box does not recognize it. Switched unit off, plugged in USB stick with extracted files, switched unit on, and it just boots up without going through the upgrade process. Any solutions? Thanks everyone for your hel...

bernien

As suggested by MrQuade, I turned IceTV on to clear the EPG and turned it off again a short time later. That fixed the problem. Thanks for all your help.

bernien

EPG cache reload is Off
EPG cache location is Internal Flash
I don't do anything particular with the GUI or deep standby. I just turn the T4 on when I need it and turn it off when I have finished with it. I use the T4 pretty much 100% of my TV watching time whether live TV or recorded programs.

bernien

In Webif under Providers>SBS I have only one of each of the channels as per your response. NITV SBS Food SBS ONE SBS ONE HD SBS VICELAND SBS VICELAND HD I have zapped to each of the SBS channels for more than 30 seconds previously and again this evening but no EPG. I just let nature take its course ...

bernien

When viewed through Webif: Terrestrial TV LCN finishes at 308 - HDMI IN. SBS ONE is at 3 and the remaining SBS channels are at 30 to 34. No repeats. Last Scanned has 352 - SBS ONE HD, 353 - SBS VICELAND which are repeats of 310 and 312, and a few other non-SBS channels below 350 EPG populates automa...

bernien

None of the SBS EPG's populate on my T4. They used to but they are now completely blank. Not sure when or why they stopped working but it is recently. All other channel EPG's populate OK. Have done a channel re-scan but this did not help. Pressing the OK button while on the channel will show the cur...

bernien

In the Logitech Harmony Remote Software, go to DEVICES>(Beyonwiz device)>Adjust inputs. In the first page, select Method 2 (when the device has individual input selection buttons). In the second page, remove the TV and Radio inputs, and add one called None (IIRC, it won't let you have an empty list...

bernien

Thanks MrQuade. That fixed it. However, it is not possible to remove the step set source to TV on the Harmony. For Beyonwiz input channel I had to choose "Source input is missing" instead of "TV" and later set the remote button "Exit" for TV input.

bernien

I have just loaded the latest T4 software and managed to get most things back to where they were but find that the bouquets list comes up at startup and has to be exited to view TV. Before the upgrade the T4 went straight to wherever I was at shutdown to standby. Is there a setting that bypasses the...

bernien

I have recently upgraded my powerline adapters to TP-Link TL-PA8010P AV1200 and get flawless transmission at about 17MBps (136Mbps) both ways. My previous DLink AV200 units also worked flawlessly but at much lower transmission speeds. Transmission is between different circuits and over the whole len...

bernien

Is there a setting somewhere to make the T4 time shifting bar graph that appears at the top left of the screen when time shifting larger? Perhaps similarly to what can be done in the recorded programs lists by altering the font size.

bernien

I am having a problem with the internet connection on my recently purchased T4. It is connected to a LAN, connections to and from my computer work OK and the unit shows that the internet is connected. However when trying some of the internet functions I get the following. Gmail Reader: “Error gettin...

bernien

I have tried all of the following with a ts file and they all have the same erratic skip and FF problem. 1. Streaming over the network from the computer to the Beyonwiz 2. Copying back from the computer to the Beyonwiz over the network and playing from the Beyonwiz 3. Copying from the computer onto ...

bernien

Thanks peteru,
I think that may be the answer to my problem (but not the solution). Maybe I was expecting too much and the Beyonwiz is just not capable of to the second accuracy on skips in ts and mpeg files. Native tvwiz files with inbuilt indexing are fine however.

bernien

Answers to some of the questions above. 1. I don't have a hard wired Ethernet cable network. However, my Powerline AV Network is pretty much equivalent. 2. If I download a native tvwiz file to my computer and play it back over the network the problem does not occur. However, I have no way of editing...

bernien

Editing is normally done with VideoReDo TVSuite V4, but I have tried ProjectX and VideoStudio Pro X6 with the same result. However the problem occurs even with and un-edited file played over the network.

bernien

The problem occurs when playing back from the computer to the beyonwiz over the network and also when playing back directly from the beyonwiz after I have edited and transferred the file back to the beyonwiz so it is unlikely to have anything to do with the network. I have a D-Link DHP-306AV Powerli...

bernien

When I play back ts files that I have downloaded from my Beyonwiz to my computer they have unstable skip forward/back and fast forward/back positioning. For example, if I skip forward several minutes to a particular position on the bar graph the position can then change anywhere from +/- 10 seconds ...

bernien

I'm a little curious as to why you copy the files off the Wiz, just remove ads then copy them back to the Wiz. My motives for processing video files as I do is as follows. 1. I hate having to search for the beginning of a program and being interrupted by ad’s, even if I can skip or fast forward the...

bernien

Thanks Gully and glow. These hints gave me the keys for a process to get subtitles working on edited ts files. It is very clunky but it can be done if I really want to retain subtitles on an edited video file. For anyone interested here is my method. 1. Prerequisites – Network between Beyonwiz and c...

bernien

I have now tested ProjectX and extracted an srt file. However this has limitations. 1. The DP-P1 does not recognize an srt file so it cannot be copied back to the DP-P1 hard drive from the computer 2. The DP-P1 will pay video with subtitles over the network from the computer hard drive with subtitle...

bernien

I was really hoping for a setting somewhere that would allow the DP-P1 to find the subtitles in the ts stream without further processing. I only very occasionally resort to turning subtitles on for short periods if there is something critical I can't quite get so spending extra effort to recover the...

bernien

If I use WixFx to download a ts file of a recorded program over my network from my DP-P1 to my computer the subtitles do not show up when I play it back over the network on my DP-P1, even without any editing. Watching the original recorded program from the DP-P1 does however have subtitle capability...

bernien

Does anyone know why index.txt changes to INDEX.TXT. I have had my Beyonwiz for over two years and this has just happened now for some unknown reason. It would be good if WizFX recognised INDEX.TXT as well as index.txt and/or the Beyonwiz did not capitalise this file name.

bernien

Here are my instructions for overcoming the WizFX "Failed to Load File List". Note the warning on the BWFTools release page but do not get too scared. Just be careful. All care taken with these instructions but no responsibility accepted. Instructions are for Windows XP and firmware DPP1_F...

bernien

Hi Peter, I managed to complete everything successfully and have WixFX back on line. Thanks for your help. I had to experiment a bit with accessing the Beynwiz via telnet but got there eventually. Also found that I had to do a reindex before I could load the original firmware back onto the Beyonwiz....

bernien

Thanks Peter. I found that I had to
set PERLLIB=.
before running bw_patcher.pl. I now have a patched wrp file but need a quiet moment to do the change on the Beyonwiz which could take a couple of days.

bernien

Hi Peter, I am still in trouble. I still get the same error. I did do a cd to the directory with the unzipped BWFWTools files. It does not seem to be able to find the Beyonwiz::Hack::Telnet module. Where is this located? I haven't been able to find it anywhere in the BWFWTools files when I examined ...

bernien

Thanks for your help Peter but I am still unable get past stage 1 of your instructions. If I enter code bw_patcher.pl Beyonwiz::Hack::Telnet DPP1_Firmware_04Jun2009_ver_01.05.301.wrp DPP1_01.05.301_telnet.wrp as a DOS promt command line I get - Error opening 'Beyonwiz::Hack::Telnet': No such file or...

bernien

Thanks for your suggestions guys. I have tried reindexing several times but to no avail. I will persist with telnet but having never used it before I cannot fully understand prl's instructions. I am using DPP1_Firmware_04Jun2009_ver_01.05.301.wrp. What do I write as "original-firmware.wrp"...

bernien

After many months of using WizFX to transfer from DP-P1 to PC it suddenly gives me a message ?Failed to Load File List?. From another post I have deduced that this is due to capitalisation of INDEX.TXT. I can access the index via http://10.1.1.4:49152/idehdd/hyperspace/INDEX.TXT but not via http://1...

bernien

netmask wrote: Have you tried reindexing?

I tried reindexing several time as well as renaming in case there was a problem in the file name as happens with SBS

bernien

Hi Bernien, What happens if you try to push the file from the Beyonwiz UI? Regards, Ian. I am not sure what is meant by "try to push the file from the Beyonwiz UI". I tried copying from the Beyonwiz to my computer from my computer using WizFX in both ts and tvwiz format, neither of which ...

bernien

Since last week I have not been able to copy Channel 7 recordings from my Beyonwiz DP-P1 to my computer using WizFX. Cannot copy these programs to a USB memory stick either. Programs recorded on all other channels copy OK. Copying channel 7 programs has worked perfectly for months, probably more tha...

bernien

Hello Ian,

I have copied all "Recordings" and "Contents" files to my computer, carried out a HDD format, upgraded to firmware 01.05.301 again, carried out a re-index and everything seems to be back to normal again. There must have been a glitch in my previous firmware upgrade.

bernien

Thanks Ian, I tried a re-index as you suggested but it made no difference. The problem appears to be due to the "Recordings" and "Contents" folders being switched in firmware 301. I have now gone back to firmware 280 and retained WixFX.exe 1.0.2.3. WizZilla can now see the record...

bernien

I have just updated my DP-P1 firmware to 01.05.301 and now I cannot access the "Recording" files over the network using WizFX.exe 1.0.2.3 which I have also just installed. I can however access the "Contents" files which I could not do with the prvious versions . Wizzilla 1.1.0.60...

bernien

I have been trialling WizZilla 0.0.0.40 beta over a wireless network between a desktop PC to a DP-P1 and have noticed that it gives erroneous download rate data. On a 24GB download the following was noted. 1. The progress bar seemed to be correct. 2. ?Download rate? started at 1.5MB/sec, increased t...

bernien

I have used the very helpful advice found in the Beyonwiz forum plus the ?How-To Guide? in http://www.beyonwiz.com.au/guides.asp to set up a wireless network between my DP-P1 and my Desktop PC (running Widows XP Home) using WPA wireless security. I did have some problems along the way and I found th...

bernien

I recently bought a Western Digital 230GB My Passport Essentials USB HDD which I was hoping to use as a storage device for recorded movies, DivX files, MPEG files and JPEG files that would allow me to view them on my Beyonwiz DP-P1. However, the Beyonwiz refuses to recognize this drive either when a...

Search found 48 matches

Re: T4 - Tuners A/B have died

Re: T4 - Tuners A/B have died

Re: How to recover a deleted folder

Re: How to recover a deleted folder

Re: How to recover a deleted folder

How to recover a deleted folder

Re: No EPG for Nine Network

Re: No EPG for Nine Network

Firmware v19.3 will not load on T4

Re: SBS EPG's Not Populating

Re: SBS EPG's Not Populating

Re: SBS EPG's Not Populating

Re: SBS EPG's Not Populating

SBS EPG's Not Populating

Re: T4 Bouquets at starup

Re: T4 Bouquets at starup

T4 Bouquets at starup

Re: Using Powerline adapters - LAN over 240v

T4 Time Shifting Bar Graph

T4-2000 Internet connection

Unstable Skip and FF ts File Playback Positioning

Subtitles in ts file

WizFX "Failed to Load File List"

Re: Channel Seven File Transfer Failure

Channel Seven File Transfer Failure

DPP1 Firmware 01.05.301 Networking Problem

Western Digital Passport Essentials USB HDD

About the Forum

Search found 48 matches

About the Forum

Join us