Beyonwiz Australia

blip

This thread has some info.
viewtopic.php?f=67&t=15419

blip

Here it is.

blip

Gigablue doesn't work on the newer versions of Android. OpenWebif might be an option depending on what you are wanting to do.

blip

Try deselecting Inherit AutoTimer. If you have added an autotimer on a channel that's not in favourites that setting will cause that channel to be added to EPGRefresh.

blip

Unfortunately Beyonwiz products are no longer available.

blip

Here is a current full scan from Orange.

The serviceref for gekko is 1:0:16:8EA:808:320C:EEEE0000:0:0:0:

blip

Gecko is available in Orange. The service reference is 1:0:16:8EA:808:320C:EEEE0000:0:0:0:

blip

prl wrote: ↑
Thu Jul 20, 2023 17:09

softtoytrev wrote: ↑
Thu Jul 20, 2023 16:40
The remote that I have is in the attached image below. You will see that it is a lot thicker that what you were asking about.

No, that's exactly the remote I meant.

The remote in the attached image is different to the image of the remote in your link.

blip

hugson wrote: ↑
Mon Jun 26, 2023 14:08
"Use as HDD" setting ON, a recording last night on my V2 was replicated on my T2, thereby causing 2 autotimer recordings on my T2 to fail because I have only 2 tuners on the T2.autotimer are replicated. .

Shouldn't "Use as HDD" be off?

blip

Is this what you are after?

blip

Have a look at viewtopic.php?f=16&t=5253

blip

I did read elsewhere that RemoteUpdate would only work with WinXP, whereas the recent advice has been that Win7 can be used. Any thoughts on what I might be doing wrong? This post has some information on getting RemoteUpdater working with Win7 https://www.beyonwiz.com.au/forum/viewtopic.php?f=18&am...

blip

DP-S1 firmware https://1drv.ms/u/s!AqcpFuQQNh2DwC12F4kCyntmC2yf?e=ggaIKv DP-P2 firmware https://1drv.ms/u/s!AqcpFuQQNh2DwCwk-5zirGQEcChc?e=LBgYtQ I also found another firmware for the P1. I think it enables AAC audio. I don't think it was officially released. It may not even be from Beyonwiz but I'm...

blip

A copy of the firmware is here (for now, it will dissapear at some piont)
https://1drv.ms/u/s!AqcpFuQQNh2DwCg89zL ... P?e=LNRNnV

blip

Happy to try and help. It's a shame the P2 is no longer fully up to the task.

blip

Well that saves me trying to find the firmware files. It seems the P2 is due for a well earned retirement.

blip

You will need to find the firmware update file and copy it to a USB drive. If I remember correctly there were two different versions of P2 chip sets and which firmware you need can be determined from the serial number. There's a good chance I have a copy of both firmwares somewhere and probably the ...

blip

Have a look at this thread. There might be a firmware floating around that can decode AAC audio.
viewtopic.php?f=3&t=9737

blip

I think the replacement remotes being sold by Beyonwiz are actually T3 remotes. If the remote you have is a T3 remote the last section of the T3 manual explains how to set up the TV side of the remote. The T3 manual can be downloaded here http://www.beyonwiz.com.au/media/downloads/Beyonwiz_T3_User_M...

blip

If the access point is allocating addresses as well as the router allocating addresses doesn't that mean they are both running DHCP servers?

blip

Thanks for the update. Looks good on a U4 in Orange.

blip

Here is an updated scan for Orange with the change to ishoptv and the addition of 7bravo.
7bravo replaces ishoptv and is transmitting a static image which tells you where to find ishoptv which now has a new LCN.

blip

Looks good here in Orange.

blip

This probably applies to GWN7 as according to what I could find with google.

blip

It has been changed in Orange and since Seven West Media bought Prime Media I would think the rebrand is network wide.

blip

Since Prime7 has fully rebranded to 7 should the Prime7 picons be changed accordingly?

blip

7mateHD has been added in Orange.

blip

Sounds like the same problem in this thread
viewtopic.php?f=51&t=15061&p=199170#p198983

blip

It looks like any news or sport on FTA guide. They have a classification of NC which I'm guessing SBS uses for shows they have not classified.

blip

If timeshift is disabled but entered by pressing pause the stop button will go back to live TV and seems to stop timeshift ie you can no longer skip back after stop was pressed. If timeshift isn't disabled after entering timeshift the stop button returns to live TV but the timeshift buffer continues...

blip

The stop button will end timeshift.

blip

Maybe this will help
https://exiftool.org/forum/index.php?topic=10806.0

Or try googling mp4 rotation metadata.
Or maybe I'm completely on the wrong track.

blip

Here's Orange.

blip

Check the "Use original teletext position" setting". Menu - Setup - TV - Subtitle settings.

blip

Orange after a rescan this morning.

blip

The U4 is no longer available and the only current unit is the V2.

blip

I found a couple of references to Catalina dropping support for smb v1 and smb v2 and only supporting smb v3. Could this be the problem? I know nothing about Macs.

blip

I just played around with this and it looks like you need to have matching in and out pairs before the cuts can be removed. So if you accidentally insert a start cut mark you need to add an end cut mark to be able to remove the cut.

blip

From what's been posted so far, after doing a rescan it's known that you won't see the picon in Sydney, Perth, Melbourne, Canberra, Brisbane or Orange. Other regions are unknown. I don't know whether if there are any regions where it's "2" ,that they will later change to "A". Wh...

blip

I don't have a picon for ABC News Radio. Should there be one?

blip

It's A in Orange.

blip

I have read somewhere on this forum it is based on the Octagon SF8008.

blip

Dazzla_1 don't restore your settings this time as you do have problems and restoring settings will likely also restore the problems. You will need to redo your setup from scratch.

blip

"Beyonwiz" folder in the root folder, and a "u4" folder under that means the u4 folder should be inside the beyonwiz folder with the other files inside that u4 folder. Some of what you have written above sounds like you have the u4 folder in the root of the USB drive where it di...

blip

Previous and next are either side of the 0 button and below the 7 and 9 buttons.

blip

What options are shown when you select Win/Mac/NFS in File Sharing and Privileges?

blip

In the second picture there is a firmware update option in the list on the left. What happens when you select that?

blip

The release notes for the 3.1 firmware state: DSM 3.1 can only be applied to DiskStation with DSM 2.1 and onward. From the posted screenshot it looks like version 2.0 is currently installed so 2.1 may have to be installed before 3.1.

blip

There is a setting on the beyonwiz 'Enable HTTP Authentication'. This can be found at Menu/Plugins/OpenWebif.

Search found 162 matches

About the Forum

Join us