In answer to my own question I have fitted a pair of AZ1084D-ADJ Regulators that are outputting a lovely 1.249v These are rated at 5a instead of 3a in a TO-252 package. Ran the system for 6 hours after doing a Full channel rescan and everything has a constant 54 to 56deg temp. Cutting the RS 7500908...

I would just like to Thank Peteru for selling me the closest thing to a brand new DP-S1anyone could wish for. Most of the accessories are still in sealed plastic bags. Having just plugged it in, retune and setup preferences along with network settings. Now I have a HEX tuner PVR setup in the house c...

Thanks Pete PM sent

OK Baby steps here Can someone please give me the EXACT number of the LM1085 Original Part. LM1085 narrows my search down from 50,000 to 500 We have here but to name but a few from one supplier: IS ISX IS-ADJ IT IT-ADJ SX ISX ISX-ADJ ISX=ADJ/NOPB And every voltage variant to go with it 1.2, 3.3, 5.0...

Thanks for the quick response stevebow. :) Awesome that the IDT can replace the DT, The reason I say most often dodged is that the same question was asked a few times and a few ways but the conversation moved on in another direction without answering it directly. Most comments were along the lines o...

Hi everyone, sorry to dig up this old problem but I have been fortunate enough not to run into this problem until now. I have been through all of the threads on this subject which go round and around with links to each other, all of which helps piece together the issues and various solutions. Sendin...

Pete, you might like to lighten up a bit. :) Now I did contemplate sourcing some Samarium, Neodymium and Cobalt to fabricate a very strong rare-earth magnet but being short of the raw materials to manufacture this alloy, a bit of tool steel had to do. :shock: The problem with fitting an existing mag...

An update on the door not staying closed... I decided the easiest/cheapest solution to obtaining a suitable magnet for this dilemma was to sacrifice a hex drive bit. Hex_Bit_sml.jpg After attacking the bit with the Dremel and extracting the little embedded magnet from within, I noticed some peculiar...

Thanks prl
I did try it but it didn't really help...!
Next stop will be the end of the vacuum cleaner tube, with a bit of luck it could still be in there, fingers crossed

Thank you MrQuade for confirming my suspicions.
Now I can look for a solution for the problem without worrying so much about damaging the unit.

Hi All... We purchased a T4 with 6T HDD a few months ago now and are slowly getting the new device to do what we want it to... Anyway, we had reason to open the front door to try something with the front usb port and now we can't get the door to stay closed...! :? Just wondering if the little box ca...

Hi all, Have loaded the latest F/W 01.05.280 (with an at the wall switch off afterwards) to both P1?s and the S1. After a play, so far I love the added functions but am yet to test my last gripe being the loss of time shift when a timer fires and throws you to LIVE. A HUGE THANK YOU to all involved....

Hi Tony Working backwards, the Wiz only powers down as you explained, therefore no issue with that ? being a user fault ? mistake. We sometimes go to switch it off and chose later (being after the recording) and go to bed and then decide to watch something that was recorded on the S1 only to have it...

Last night happily streaming from my S1 in the lounge room to the P1 in the bed room and the program just stopped as if the S1 had turned off after a recording as it sometimes does, No issue with that. But the S1 was still on and we thought it might just need a reboot in the morning. This morning th...

Hi Ian,

When I am time shifting and go to change channels, or do anything else that will loose the buffer, I get a warning Notice that the time-shift buffer will be deleted, Are you sure Yes/No.

When was it delivered, therefore should be removed?

Thanks

Rob

If I knew that a recording was about to start, I wouldn?t have the problem in the first place!!! I have most of my recordings setup via Ice so I don?t have to remember when/what is going to be recorded, let alone ?Know in real time? when a recording is about to start. The wonders of automation? For ...

This has been mentioned before but I cannot find it in the wish list or even as a bug but it is a constant issue that is becoming a real pain. When watching in time shift mode and a recording starts on the same channel, it jumps to Live TV and looses the buffer contents, therefore loosing the rest o...

Hi Sub3r, Thank you for your feedback, :D Your setup is remarkably simular to mine, as per router/PC setup via wired LAN with an ext, usb HDD attached. XP etc, etc. I don?t know what the formatting of the S1?s 500GB drive is, I just plugged it into the S1 and formatted it from there. I had/have both...

Hello all, After getting frustrated with my DP-S1 to the point of considering to ?Ebay? it, the latest software revision has turned me around to the point I just bought a DP-P1 to replace the Toppy 5K in the bedroom. Every thing has hooked up with a minimum of fuss along with the latest firmware for...