Beyonwiz Australia

itstonyb

I have only changed it on the V2, I didn't need to change it on the T4, it works on utf8

itstonyb

Ok, simple fix..I changed the "Mount Using" from AUTOFS to Enigma2 ,saved and the mounts light up green and work again.

Thanks all for trying to help.

I haven't done the beta firmware upgrade yet, do I need to?

itstonyb

I tried removing the ,=ver2.1 yesterday, but that did nothing

itstonyb

Thanks for the link Yes the T4 mounts to the Synology, I just went upstairs and all good, I then deleted the mount and re-entered it and still all working properly. The only difference in the settings is: utf8,vers=2.1 on the V2 vs utf8 on the T4 So it must be the V2 that is the issue Will try the b...

itstonyb

Still no joy. I can access the V2 through OpenWebif and play live tv on my pc so obviously not a network error on the V2. The V2 wont mount anything, not just my Nas, but also not my PC or T4 upstairs. Where do I get the beta firmware upgrade from and also are the instructions to upgrade the V2 the ...

itstonyb

Ok will try that however it's been that way all along without any problems until now (6 years of T4 and V2 mounting to my NAS).

itstonyb

Last 2 attempted mount saves: Jun 29 22:39:01 beyonwizv2 user.info kernel: ^[[1;32mdvb video add event 2 - 30 0 25 0 Jun 29 22:39:01 beyonwizv2 user.info kernel: ^[[mir frame error. Jun 29 22:39:01 beyonwizv2 user.warn kernel: ir frame error. Jun 29 22:39:32 beyonwizv2 user.warn kernel: Enter DMX_Os...

itstonyb

Just attempted to re save mounts again and here are the log file lines: Jun 29 21:57:44 beyonwizv2 user.warn kernel: proc_vmpeg_0_dst_apply_write 00000001 Jun 29 21:57:46 beyonwizv2 user.warn kernel: Enter DMX_OsiPcrChannelDetachSync 0 0 Jun 29 21:57:46 beyonwizv2 user.warn kernel: DmxPcrAcquire 0 -...

itstonyb

# automounter configuration MAIN -fstype=cifs,user=*user*,pass=*pasword*,rw,iocharset=utf8,vers=2.1,cache=loose ://192.168.0.4/New Volume NAS -fstype=cifs,user=*user*,pass=*password*,rw,iocharset=utf8,vers=2.1,cache=loose ://192.168.0.100/Disk Storage First mount is my PC, second is my Synology NAS ...

itstonyb

Here are the full log meesages for today: Jun 29 17:34:35 beyonwizv2 daemon.notice ntpdate[1910]: step time server 27.124.125.252 offset 1624959249.673003 sec Jun 29 17:34:35 beyonwizv2 daemon.err ntpdate[1911]: step-systime: Invalid argument Jun 29 17:34:35 beyonwizv2 daemon.notice stb-hwclock: Cur...

itstonyb

ok so Im guessing this piece of rubbish is heading for the bin

itstonyb

I've also tried a full factory reset but to no avail.

itstonyb

I also notice that when I update an existing mount, it does it in about 2 seconds whereas it normally take 15-20 seconds to advise "your network mount has been updated".

itstonyb

ok I have no idea what you have said but here are the last few lines of the log file: Jun 29 19:25:10 beyonwizv2 user.warn kernel: Enter DMX_OsiPcrChannelAttachSync 0 0 4325376 Jun 29 19:25:11 beyonwizv2 user.warn kernel: video[0] ready to play Jun 29 19:25:11 beyonwizv2 user.warn kernel: ^[[1;32mdv...

itstonyb

Nothing has changed.
The v2 can see everything connected but wont light up green in the mount manager.
Have not done a firmware update on either the V2 or the Synology

Where do I find log messages:
/var/log/messages on the V2?

itstonyb

Yes sorry I meant to say the server ip of 192.168.0.100 is the address of my Synology, which hasn't changed

itstonyb

Hopefully someone can help: The network mount in my V2 has stopped working (red x) It was connected to my Synology Diskstation which still works fine, no changes to anything and still fully accessible from my pc. This has happened before a few times but all I've needed to do is go into mount manager...

itstonyb

I haven't tried upgrading to the beta, but did do a full factory reset, which seems to have improved things.
Will keep an eye on it and if it persists will send it back to bw.

Thanks for every ones input

itstonyb

I installed Kodi, but no change, audio sill lags on USB and NAS files

itstonyb

ok yes then I have tried the delay in V2's AV Settings to both positive and negative delay but neither make a difference.

Besides, if it did it would also affect recordings as well I assume (which it also does not).

My receiver is only positive delay and that just makes it worse.

itstonyb

I have tried changing the AC3 or AAC delay settings in the V2's AV Settings menu which only made it worse, so set back to default (0 delay). In fact I need to take delay away, not add more. I am using a receiver however it does not produce any audio delay from any other source such as the T4, PS4 or...

itstonyb

The Audio formats of the files stored on my NAS are a mixture of AC-3, AAC-2, A_AC3 and A_EAC3. All of them (other than recordings from the V2 which are AC-3) lag on audio by around 100/200 ms on the V2 including the same files played from a USB stick directly plugged into the V2. None of the files ...

itstonyb

Will try the USB.

How do I see what audio format each file has?

itstonyb

The V2 is bare bone so no internal HDD. Files on the NAS are a variety of MKV and MPEG files and have been fine on my T4 right up to when I changed it out for the V2. Using AUTOFS and CIFS share Have tried on/off for down mixing Dolby/DTS to stereo in the V2 but makes no difference. I replaced my T4...

itstonyb

Is anyone having an issue with audio delay on the v2 when streaming files from a NAS? I am getting an out of sync audio delay on all files I stream from my Synology NAS to the V2 other than recordings made on the V2 tuners which are also stored on the NAS. I get no audio delay with recordings or liv...

itstonyb

that's disappointing,. I have an old dual core pc of 8 years old and VLC player on that will play a HEVC file? I would have to say that this T4 is the most underwhelming piece of crap I ever owned. Locks up all the time, lags badly when simply changing from file view to live tv, locks up needing a r...

itstonyb

Does anyone know when the T4 will support playback of HEVC?

itstonyb

Hi I have tried the instructions below exactly, however my T4 will not recognise the USB stick and just boots up normally after switching on from the rear power switch. I have tried front and rear USB slots, FAT32 and EXFAT formats, USB 2 and USB 3 sticks. The download folder named "beyonzwiz&q...

itstonyb

looks like 7 have dropped 7HD except for simulcasting 7 mate content.
7 are the only channel to not simulcast its prime channel on HD.

itstonyb

That's great, by turning off password protected sharing in the Network and Sharing Centre/Change advanced sharing settings that worked a treat. Thanks for your help.

itstonyb

Ok found the share tab. I am trying to share a drive on my pc labelled G: My pc is named "main" and the share name on share tab shows as "\\Main\g" I have checked that the drive is shared in windows file manager. I type \\Main\g into the server share field on the T2 but when I tr...

itstonyb

hi Mark
I am using Win 10 and the share options are different as there is no sharing tab under properties for me to set my share folder.

itstonyb

Ok thanks.

So looks like "suck and see" on streaming files.

I have a WD TV Live which streams almost anything other than AAC files

itstonyb

Does anyone have the full specs on the T2 and T4?
Such as file types it will stream and play from a Nas/PC etc?

itstonyb

Yes sorry, 2 years since last update.

As for other media players out there I actually use a combination of the wiz and a WDTV Live box (about $129) to play 720p and 1080p mkv files.

The combination gives me everything.

Still havn't found a single device that does everything really well!

itstonyb

Product may be dying and it is frustrating that no updates have been forthcoming for 3 years now, however there is still very little else on the market(if anything) that does what a wiz does. My only gripe with the wiz is it's inability to consistently play 720p mkv files and total inability to play...

itstonyb

OK Thanks. Would you happen to know if 2 Humax 7500T's would be able to see each other in the same way?

itstonyb

Currently I have 2 x Beyonwiz DP-P1's in my network and I can see and stream files from both on either BW or my PC.

Does anyone know if a Humax 7500T has the same connectivity with a Beyonwiz?

itstonyb

Yes I did!
Thanks anyway

itstonyb

Ok, well thanks for your help. Pretty ordinary from BW I'm afraid. I bought this DP-P2 after having a DP-P1 and am amazed to now learn it cannot do what the DP-P1 can do. Any idea if there will be future updates to fix this and within a year which is the usual timeframe for releases from BW? Cheers ...

itstonyb

I did read through it all but found it confusing, hence my further queries.

So, if 01.07 series is what my machine came with, there is then no support for ISO playback?

itstonyb

Thank you both for the info. I realise it must be frustrating when people ask questions without apparently searching for answers on here first, but to be really honest, as an infrequent visitor to this forum, it is not as easy as you think to find the answers using the search facility. I am still co...

itstonyb

Thanks, but I am referring to the BW site which has the following firmware at the top of the list which one would assume is the latest:

DP-P2 01.07.014

However I have loaded this but it still will not allow me to play ISO files. Keep getting unsuported format.

itstonyb

Have searched and cant find this on here.
Can anyone please advise what the correct latest firmware version for DP-P2 is please?

itstonyb

No I haven't tried component.
I will try that also.

Thanks

itstonyb

I'm not debating anything. I'm trying to answer the questions. I have given you all the audio settings I can find. What others do you require please? I already stated "all" channels are effected. This means SD and HD channels. I dont know which channels have MPEG and AC3/Dolby Digital trac...

itstonyb

Not sure if this helps, but I also have a DVD player connected as follows:

Composite video cable to TV
Coaxial audio cable to AMP

No AV sync issues

They only exist when using the DP P1

itstonyb

The only other I have not answered is "what audio track are you listening to when it happens?" Unless I misunderstand, this is not applicable as it is "live" television broadcasts that are out of sync, not audio tracks. When I replay that broadcast, after recording or using time ...

itstonyb

Sorry, what did I not answer?

Search found 80 matches

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: T3 can't find network mount after some time

Re: V2 Audio delay when streaming

Re: V2 Audio delay when streaming

Re: V2 Audio delay when streaming

Re: V2 Audio delay when streaming

Re: V2 Audio delay when streaming

Re: V2 Audio delay when streaming

Re: V2 Audio delay when streaming

V2 Audio delay when streaming

Re: T3 hangs playing some MKVs

Re: T3 hangs playing some MKVs

Re: New Firmware for all T-Series Models (T2/T3/T4) 10/03/20

Re: Seven Going Down HD Route too with 7HD

Re: Beyonwiz T3 - Answer to: "playing files on home network

Re: Beyonwiz T3 - Answer to: "playing files on home network

Re: Beyonwiz T3 - Answer to: "playing files on home network

Re: Is the T3 worth the money

Re: Is the T3 worth the money

Using a Humax 7500T with a Beyonwiz DP-P1

Latest Firmware version for DP-P2 please

About the Forum

Search found 80 matches

About the Forum

Join us