Beyonwiz Australia

muzza

prl wrote: ↑
Mon Apr 16, 2018 20:13
...
You don't need to be on the beta stream to download any USB update.
...
We should ask muzza of course, but I think he's saying that the procedure to download an online update is too difficult when it's not networked. USB updates are his only option.

Exactly. Thanks

muzza

prl wrote: ↑
Sun Apr 15, 2018 23:35
Unless you want to be on the beta update stream....

That's what I meant by "attempting the procedure". Is it possible to download one of the 17.5 versions without being on the beta update stream?

muzza

Thanks MrQuade.

I guess I'll have to pull the Toppy out of retirement until I can attempt the repairs.

muzza

So, getting back to the question in the OP... Any idea when 17.5 will become an official release, with the usual publicity from Wiz HQ and availability from the production stream? I'd like to know this too. Not keen on attempting the procedure to get the Beta version. And my T4 isn't networked.

muzza

My wife told me her T4 had lost all of the 7 network channels. All other networks are fine. She was watching the Comm Games fine through the 'Wiz on Saturday. The TV still gets channel 7 and my T2 also. I tried switching it off at the back and waiting a number of times, but still, 7 Network wouldn't...

muzza

Thanks Ian and Peter. I looked in there earlier. Not very obvious, but I got there in the end...

muzza

I can't for the life of me find out how to change to a 12 hour epg in 16.1...

muzza

OK. USB upgrade done. IceTV epg now showing. I had to work out how to adjust it to fit it to the screen tho'. It made the epg too big for the screen. Fixed now. I just had another look in the 'About' screen and it's still showing 16.1 as the "image". I'm still not sure how to determine wha...

muzza

I can't find what version of Firmware my T2 is running. In the 'Information/About' page, it says "Last Upgrade: 2016-08-18" and "Drivers: 2016-04-05". Nothing about 'firmware'. When I go into 'Setup/Software manager/Check for updates now', it says "Nothing to upgrade". ...

muzza

Thanks MrQuade. Can you confirm that I am, in fact, looking in the right place? It should show up in the PlugIns menu?

muzza

Trying to install IceTV on my T2 but it ain't nowhere to be found.

If I remember correctly, when I installed it on the ex's T4, it was in the plugins section of the main menu.

Thanks in advance.

muzza

Update: Replacement T2 arrived today.

It works perfectly. No 'compatibility' issues. There must have been a bad batch of sound components as it looks like I wasn't alone.

Thanks again to everyone that offered advice.

muzza

I haven't had my T2 working yet, but the USB tuner has me intrigued. The tuner plugs in to the output that normally goes to the TV, so there doesn't seem to be any way to connect the coax to the TV. If I use the USB tuner, does that mean that I can't run the antenna to the TV? Do I need to run an ex...

muzza

It took longer than I thought, but it is a positive response. ---------------- Hi, Sorry for the trouble, I am going to arrange to get you out a replacement and will also be emailing you a pre-paid postage slip for the return of the faulty one. To make it simple please wait until the replacement uni...

muzza

Yep. 48 hours and no response.

Hopefully someone works on Saturdays so I'll give them a call tomorrow.

muzza

Sorry to interrupt, but here's an update.
24 hours since lodging the support ticket.
No response yet.
Carry on.

muzza

I couldn't work out how to disable HDR on my TV. But I did try my T2 on our other Samsung 50" TV and still no sound. I also hooked it up to my Yamaha reciever and got nothing. I double checked the HDMI cable and inputs by connecting a DVD player and sound worked fine. I've decided I'm going to ...

muzza

MrQuade wrote: ↑
Tue Dec 05, 2017 10:26

muzza wrote: ↑
Tue Dec 05, 2017 10:19

On a side note, is S/PDIF a better option for audio into the receiver, or HDMI?
Are there any firmware updates available for the TV?

It automatically updated via wifi when I first turned it on.

muzza

. So - while I was waiting for beyonwiz to replace the unit, I got by with an HDMI input to the TV, and as long as I left the 2 audio (red & white) cables in, I got sound. Incidentally - Beyonwiz were marvelous - sent a new unit immediately and very quick delivery. That's promising. Inconvenien...

muzza

It's a Sony 55X8500E I haven't hooked it up via the amp yet, (Yamaha RX-V467) just direct to the TV. How did you test the S/PDIF connection then? The TV only has an optical out port. Cheers, I didn't realise it was only an output. I had to practice contortionism and gymnastics just to plug in the o...

muzza

It's a Sony 55X8500E

I haven't hooked it up via the amp yet, (Yamaha RX-V467) just direct to the TV.

muzza

When my T2 is ON, there's a red light on the front.

When my T2 is OFF, there's a red light on the front.

Looks the same regardless of its state. Is that normal? Seems a bit odd.

muzza

No, but the TV is newer than the Wiz.

My Son's X Box worked via HDMI on it.

I've got an old Changhong TV I was about to throw out. Il try connecting to it tomorrow.

muzza

Yep - both 'downmix' settings are on.

Looks like a warranty job then? How does one go about getting it fixed?

muzza

Is that AAC downmix?

It's on.

muzza

Yes, the volume is at 100%. (I've edited my original post and added more info) I have no idea what you mean by "Also check that your audio downmix settings are tuned on as a double check." In that thread you pointed me to, somebody wrote "Is digital output enabled in the audio setting...

muzza

I bought my T2 a couple of months ago and just hooked it up tonight for the first time. I used a HDMI cable into a new Sony TV and there's video but no sound. I tried connecting via S/PDIF and still nothing. I had a look in menu/settings but I can't see how to specify the audio output. I've tried a ...

muzza

I just double checked a couple of things. I connected each tuner individually and found that only Tuner C passed the signal . Tuner D didn't work on its own. But when I connected both C & D, I got a signal and the TV display confirmed that it was Tuner D that was providing it. Strange? Do they h...

muzza

Thanks Grumpy. I worked it out and edited the post, but you found it quicker.

What's the warranty period?

muzza

Update. I followed the advice in the other thread (yes, very similar) but in my situation all four tuners are still showing up in the 'devices' page. I THINK I have disabled Tuners A & B. In 'Setup/Tuners/Tuner configuration, I've changed their status from 'Enabled' to 'Nothing connected'. Is th...

muzza

My wife went overseas for 5 weeks and while she was gone I did extensive renovations on the house. The T4 was disconnected and put into storage. It hasn't been used at all in that time. Tonight I hooked it up for her and everything was working fine until suddenly we lost all signal. The antenna cabl...

muzza

MrQuade wrote:MENU->Setup->System->Front panel skin
Set the skin to <default>

Thank you!

muzza

There may be in earlier posts in this topic that have pre-releases of picon setups. The short form is: use an FTP client to copy the files. Use a Telnet or ssh client to connect to the (Linux) commandline interface. Username is "root", no password. Just type <RETURN> if you're asked for a...

muzza

Here is a test version of the picon setup that includes updates for the regions affected by the changes in the WIN-SCA-TDT affiliation arrangements. The install/uninstall instructions assume that you know how to copy files onto your T series PVR and how to connect to and use its command-line interf...

muzza

I set up my wireless network using the WLAN dongle that came with my Topfield using the front USB port for easy access. When I was satisfied very thing was working, confirmed by the network test, I took it out and put it in one of the rear ports but no joy. The last two items of the network rest kee...

muzza

IceTV replied. Apparently IceTV thought there were two T4s, so all the recordings were going to the nonexistent one. They have fixed it from their end, and it now seems to be working as expected. A couple more questions regarding the various icons, if I may? What is the difference between a 'Series ...

muzza

Thanks for all your efforts boys. I've sent a request through the to IceTV support.

I would've thought this would be a seamless, effortless exercise. Completely doing my head in, and my less-than-technical wife is not really absorbing my enthusiasm for the shiny new box.

muzza

That's fine, that means that those recordings have been copied up to the Ice Servers. Do you perhaps have more than one T4 attached to your account, and recordings are being sent to the wrong one? No, I've only got the one. The Ice guide will have all event start and stop times rounded to the neare...

muzza

Can you provide some example timers that haven't made their way to the T4? Name and LCN should do. For the timers you set manually on the T4, do they show up in Ice 'My Week' (they should)? I set up NCIS (2016) (SC10 QLD) in IceTV and it didn't transfer to the wiz timer list. We set up a single rec...

muzza

Do the IceTV logs on the T4 show any interesting looking error messages? No. But the only recordings showing in the log are the ones we programmed directly in the 'Wiz. I presume that the EPG data is being received correctly though, just not the timers? The EPG data is in the EPG, but how do you te...

muzza

Nope, that's not it. I see that all my timers show the Beyonwiz T4 as the destination. It seems everything is set up right, but the information just isn't getting to the T4.

muzza

I can't see within the IceTV app where to select the T4 as the target device.

I'd say that's where the problem lies.

muzza

I'm not sure. How do I do that?

One thing, when I start the 'Wiz from scratch, I have to sign in to IceTV.

muzza

Yep. Installed the plugin two days ago and rebooted. The EPG shows the little IceTV logo.

How do I check that the plugin is installed properly?

muzza

I've signed up for the 1 month IceTV trial, downloaded the app and went through the EPG, setting up the series recordings. It was 'fairly' straightforward, and all my timers are showing n the iPad, but they're not showing up on the T4. I can't see any 'save' or 'send' button in the app. How do I get...

muzza

Thanks!

muzza

I've seen videos like this one where the person does the setup on the 'poota, showing the remote on the left and the TV screen on the right. https://www.youtube.com/watch?v=HbZ2ctsna6o I can't find anything on the AppStore. I've downloaded WizOS for the iPad, but I'd like to be able to configure the...

muzza

That's great news. There are lots of .mkv files in my 'stash'.

How do I change the EPG display to a 12 hour clock though? I can't find it anywhere.

muzza

Restart the UI or reboot. What firmware version? I did reboot after installing the latest firmware last night. I've had this box since late last year but I only just got the opportunity to reveal it last night when the DP-P1 started playing up again. I'm pretty much starting the learning process ag...

Search found 62 matches

About the Forum

Join us