Connect:

RSS

Email

Facebook

Twitter

Determining which Beyonwiz model you have

• All recent Beyonwiz models have their model number printed on the front of the top cover.
• The older DP-S1 model has it's model number printed on the DVD tray.
• On all models, the model number is also printed on the back panel.
• The model number is also displayed at the start of the firmware version in the Firmware Information menu.
   

Firmware Upgrade Procedure

• Scroll down this page to the section for your Beyonwiz model and *click on the link to the latest listed firmware version for your model (* Control-click, or Right-click, if using Safari web browser).
• Then select Save, Save As, Save Linked File or Download Linked File etc. and save the firmware to a location on your PC (Desktop, Documents etc. or you can save it directly to a USB memory stick). If using Safari web browser select "Don't append .txt".
• Follow the steps in this How To Upgrade the Firmware Guide
• Note: When turning your Beyonwiz on after the firmware upgrade you may be asked to perform a Full Service Scan.
   

Factory Reset Procedure

• If your Beyonwiz misbehaves you should reset it to Factory Settings, then rescan the channels and setup your Beyonwiz with your preferred settings.
• To Reset, press SETUP then go to the System menu, select Initialize, press OK, select Factory Setting, press OK then answer Yes.
• If you lose the picture to your TV after a Factory Reset, press and release the TV-OUT button on your Beyonwiz remote control and then wait 4 seconds. If there is still no picture, repeat the press and release of the TV-OUT button, while waiting 4 seconds between each attempt. Once the correct output is found you may be asked to confirm the change - you must select Yes and press OK before the picture reverts back to the previous setting.
  Note: Via the TV-OUT button there are 10 TV-OUT settings in total.
   

DP-P2TB

IMPORTANT!  For the DP-P2TB model you must use the 1.07 series firmware. Do NOT use 1.05 series firmware from the older DP-P2 model.

DP-P2 1TB

IMPORTANT!  For the DP-P2 model you must use the correct firmware series (1.05 or 1.07) depending on the serial number.

For older DP-P2s with serial numbers below 1032098000000 you should use 01.05.xxx versions of firmware.
For newer DP-P2s with serial numbers above 1032098000000 you MUST use 01.07.xxx versions of firmware.

NOTES:  The serial numbers are hexadecimal. i.e. 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
Installing 01.05.xxx series firmware on a late model DP-P2 will result in the unit failing to start (which is only recoverable via an Ethernet network and a Windows XP PC).

DP - P2

IMPORTANT!  For the DP-P2 model you must use the correct firmware series (1.05 or 1.07) depending on the serial number.

For older DP-P2s with serial numbers below 1032098000000 you should use 01.05.xxx versions of firmware.
For newer DP-P2s with serial numbers above 1032098000000 you MUST use 01.07.xxx versions of firmware.

NOTES:  The serial numbers are hexadecimal. i.e. 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
Installing 01.05.xxx series firmware on a late model DP-P2 will result in the unit failing to start (which is only recoverable via an Ethernet network and a Windows XP PC).

DP - Lite i

DP - Lite

FV - L1

DP - H1

DP - S1

DP - P1

LiDiC

BR-01 Remote Control

BR-02 Remote Control

WizOTT